ページ1に含まれる内容の要旨
User’s Guide
ページ2に含まれる内容の要旨
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or physical da
ページ3に含まれる内容の要旨
Contents 3 Changing the Projected Image . ............... .............. 27 Notations Used in This Guide ........................ 2 Automatically Detect Input Signal and Change the Projected Image (Source Search) .. . ....... ......... .. . ....... ......... .. . ....... .......... 27 Switch to the Target Image by Remote Control . .. ..... ... ..... .. ..... .. 28 Introduction Changing the Aspect Ratio of the Projected Image . ..........
ページ4に含まれる内容の要旨
Contents 4 Setting the Remote Control ID ...... ..... .......... ..... ........... 43 When WEP is selected ... ... .... ..... ..... ... .... .... .... ..... 73 When WPA-PSK(TKIP/AES) or WPA2-PSK(TKIP/AES) is selected .. .... ... ... . 75 Color Correction when Projecting from Multiple Projectors When EAP-TLS is selected ... .. .. .. ... . . . . . .. .. .. ... .. .. ... .. .. . 76 (Multi-screen Color Adjustment) ........... ................. 45 EAP-TTLS/MD
ページ5に含まれる内容の要旨
Contents 5 Lamp replacement period . ......... ........ ............ ....... 104 Network Functions (EB-G5950/G5650W Only) How to replace the lamp . ..... ...... ... ..... ...... .... ..... ... 104 Resetting the Lamp Hours .... ......................... ........ 107 Projecting with "Connect to a Network Projector" (EB-G5950/ Replacing the Air Filter . ..... .... ... ..... ..... ..... ... ..... ..... 107 G5650W Only) . . . .........................
ページ6に含まれる内容の要旨
Contents 6 Appendix Optional Accessories and Consumables . ................... 147 Optional accessories . .......... ................ ........... .... 147 Consumables . . ... .. .. ... .. .. .. ... .. .. ... .. .. ... .. .. ... .. .. . 148 Screen Size and Projection Distance ....... ................. 149 Projection Distance of EB-G5950/G5900/G5800/G5600/G5500 . . . ...... .... . 149 Projection Distance of EB-G5650W . . . . . .... ... ... .. ... ... ... ... .... 150 Supported Monitor Di
ページ7に含まれる内容の要旨
Introduction This chapter explains the projector's features and the part names.
ページ8に含まれる内容の要旨
Projector Features 8 Ease of Use when Installed on a Ceiling Mount Meets a Wide Range of Needs Centered lens Project two images simultaneously (Split Screen) The lens is positioned in the center of the projector so it is well balanced and is easy to You can simultaneously project the images mount on a ceiling. This also makes it easy to line up the screen and the projector. from two video sources lined up on the screen. This increases the range of applications, such as when holding a video Equip
ページ9に含まれる内容の要旨
Projector Features 9 By setting a password you can restrict who can use the projector. s p.49 Taking Full Advantage of a Network Connection (EB-G5950/G5650W only) Control Panel lock restricts button operation on the control panel. You can use this to prevent people changing projector settings without permission at Simultaneously project four images for dynamic conferences events, in schools, and so on. s p.51 By using the supplied EasyMP Multi PC Projection applications software, the images fro
ページ10に含まれる内容の要旨
Part Names and Functions 10 Name Function Front/Top Exhaust vent for air used to cool the projector internally. B Air exhaust vent EB-G5950/G5650W with the standard lens is shown in the illustration. Caution From here on, all features will be explained using illustrations of EB- G5950/G5650W with a standard lens unless otherwise specified. Do not place objects that may become warped or otherwise affected by heat near the Air exhaust vent and do not put your face or hands near the vent while pro
ページ11に含まれる内容の要旨
Part Names and Functions 11 Name Function Name Function Turn the dial to move the position of the projected image Holes for screws to fix the cable cover in place. N Vertical lens shift dial B Screw holes to fix the up or down. s p.22 s p.144 cable cover Turn the dial to move the position of the projected image When installing the Wireless LAN unit, use this screw hole Horizontal lens shift Screw hole to fix O C left or right. s p.22 to fix the unit in place to avoid loss and so on. s p.143 dial
ページ12に含まれる内容の要旨
Part Names and Functions 12 Rear Interface EB-G5950/G5650W Name Function Install the Wireless LAN unit here. Remove the cover A Wireless LAN unit when installing. s "Installing the Wireless LAN Unit installation section (ELPAP03) (EB-G5950/G5650W only)" p.143 (EB-G5950/G5650W only) Control Panel s "Control Panel" p.15 B s "Interface" p.12 C Interface Name Function Connects to the power cable. s Quick Start Guide D Power inlet Outputs to an external monitor the analog RGB signal A Monitor Out por
ページ13に含まれる内容の要旨
Part Names and Functions 13 Name Function Name Function When controlling the projector from a computer, connect For analog RGB signals from a computer and component E RS-232C port Q Computer2 input port it to the computer with an RS-232C cable. This port is for video signals from other video sources. control use and should not normally be used. Connects to the audio out port of the device that is Audio2 input port R s "ESC/VP21 Commands" p.116 connected to the Computer2 input port. For analog RG
ページ14に含まれる内容の要旨
Part Names and Functions 14 Name Function EB-G5800/G5500 Connects to the audio out port of the device that is C Audio3 input port connected to the BNC input port. Connects to the audio out port of the device that is Audio1 input port D connected to the Computer1 input port. RS-232C port When controlling the projector from a computer, connect E it to the computer with an RS-232C cable. This port is for control use and should not normally be used. s "ESC/VP21 Commands" p.116 For analog RGB signals
ページ15に含まれる内容の要旨
Part Names and Functions 15 Name Function Control Panel Corrects vertical keystone distortion. s p.25 D [w/ ][v/ ] If pressed while the configuration menu or a Help screen is button displayed, these buttons only have the [ ] and [ ] functions which select menu items and setting values. s p.54 When projecting using PC Free or Connect to a Network Projector, these buttons function only as [ ] and [ ] buttons. (EB-G5950/G5650W) Displays and closes the Help screen which shows you how E [Help] button
ページ16に含まれる内容の要旨
Part Names and Functions 16 Name Function Remote Control Turns the projector power On or Off. s Quick Start A [t] button Guide Each time the button is pressed, the image displayed [Comp1/2] button B changes between the Computer1 input port and Computer2 input port. (EB-G5950/G5900/G5650W/ G5600) Changes to images from the Computer1 input port. (EB- G5800/G5500) [BNC] button Changes to images from the BNC input port. C Each time the button is pressed, the image displayed [Video1/2] button D chang
ページ17に含まれる内容の要旨
Part Names and Functions 17 Name Function Name Function These buttons can be used to page up and down when I [Page] buttons Q [Volume] button [ ] Decreases the volume. [ ] Increases the volume. projecting an image from a computer that is connected to [[][]] [ ][ ] s Quick Start Guide the projector through the network. These buttons can be This button does not function when using EB-G5800/ used to switch the screen when projecting with PC Free. G5500. (EB-G5950/G5650W only) These buttons can be u
ページ18に含まれる内容の要旨
Part Names and Functions 18 Name Function Attention Press to assign a frequently used item from the six Y [User] button Make sure you read the Safety Instructions before handling the batteries. s available configuration menu items. By pressing the Safety Instructions button the assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. s p.59 Procedure Test Pattern is assigned as the default setting. Each time you press this button, the imag
ページ19に含まれる内容の要旨
Part Names and Functions 19 Operating range of remote control Caution When using the remote control, point the remote control light-emitting Check the positions of the (+) and (-) marks inside the battery holder to ensure area at the remote receiver on the projector. The operating range of the the batteries are inserted the correct way. remote control that is provided with the projector is shown below. Horizontal operating range C Replace the battery cover. Press the battery compartment cover u
ページ20に含まれる内容の要旨
Useful Functions This chapter explains useful tips for giving presentations, and the security functions.
