ページ1に含まれる内容の要旨
EIKI VISUAL SYSTEM PRESENTER
V-2500
OWNER’S INSTRUCTION MANUAL
EIKI INDUSTRIAL CO., LTD.
ページ2に含まれる内容の要旨
WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an quilateral triangle is intended to alert the user to the presence of
ページ3に含まれる内容の要旨
8. Accessories - Do not place this unit on an unstable can, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult, and serious damage to the unit. Use only with a can, stand, tripod, bracket, or table recommended by the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9. A unit and ca~ combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and c
ページ4に含まれる内容の要旨
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or shod-out pads that could result in a fire or electric shock. Never spill liquid of any kind on the unit. 17. Servicing - Do not attempt to service this unit yourself as opening or removing cove
ページ5に含まれる内容の要旨
TABLE OF CONTENTS 1. DESCRIPTION AND CONTROLS 2-3 2. SETTING-UP REMOTE CONTROL UNIT 4 3. ORERATION OF REMOTE CONTROL 5 4. SETTING-UP THE UNIT 6 5. HOW TO CONNECT TO A TV MONITOR AND EXTERNAL EQUIPMENT 7 6. HOW TO USE AUTO FOCUS 8 7. HOW TO DISPLAY 9 8. TROUBLESHOOTING 9 9. SPECIFICATIONS 10-11
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1. DESCRIPTION AND CONTROLS 1. CAMERA HEAD Rotate to shoot the printed materials and three-dimensional objects in shooting area and to shoot the distance objects. 2. REMOTE CONTROL STORAGE Remote control unit works also when seating in the housing. 3. S-VIDEO OUTPUT JACK Used to connect TV monitor or VCR with S-VIDEO input jack. 4. VIDEO OUTPUT JACK (2) Used to connect TV monitor or VCR with video input jack. NOTE : S-VIDEO AND VIDEO signal are output simultaneously and the u
ページ8に含まれる内容の要旨
2. SETTING-UP REMOTE CONTROL UNIT To insure safe operation, please observe the following precautions • Use (2) AA type batteries. • Do not use different type batteries and a new and with a used battery. • Do not discharge and disassemble a battery. • Be sure the battery polarity should be set properly and do not contact anode and cathode terminal. • Remove the batteries from the compartment when the unit is not used. • If the batteries have leaked on the remote control, carefully
ページ9に含まれる内容の要旨
3. OPERATION OF REMOTE CONTROL CAUTION 1. Memory Function The setting orders are memorized even if the unit is OFF. Press NORMAL button to restore the setting orders and return to factory preset. 2. When press on the Digital Zoom, Electronic Zoom function operates after 18 times optical zooming.
ページ10に含まれる内容の要旨
4. SETTING- UP THE UNIT CAUTION Disconnect power for setting up the unit. 1.Remove two legs from Leg stopper. 2. Spread two legs to the set up position. 3. Lift up the legs to the set up position. 4. Rotate Camera head until Lens is aiming just below. 5. Remove a Remote control unit.(it also works while it is seated in the Remote control storage.
ページ11に含まれる内容の要旨
5. HOW TO CONNECT TO A TV MONITOR AND EXTERNAL EQUIPMENT CONNECT THE UNIT AND TV MONITOR WITH VIDEO CABLES SUPPLIED AS STANDARD ACCESSORIES. 1. Video output jack of the unit connected to video input jack (S-VIDEO or VIDEO) of TV monitor with video cable. 2. How to use S-VIDEO output jack. S-VIDEO and VIDEO signal are output simultaneously and the unit can be connected to a TV monitor with S-VIDEO input jack and VIDEO input jack respectively. S-VIDEO cables may be obtained locally
ページ12に含まれる内容の要旨
6. HOW TO USE AUTO FOCUS There are three kinds of auto focus mode 1. One-Shot Auto Focus Mode This mode is to fix the focus just once when an image is set up on screen, so it is proper for the still material or object. 2. Auto Focus Mode This mode is to let focusing meet each image, so it is proper for the moving material or when materials are changed frequently. 3. Electric Focus Mode This mode is to move lens by FOCUS switch and get focusing. When FOCUS switch is operated, On
ページ13に含まれる内容の要旨
7. HOW TO DISPLAY A. When displaying printed material. 1, Connect power of the unit. Blue back image appears on the monitor and then image of the printed material will be displayed. 2. Put the printed material below the lens and operate Zoom switch watching TV monitor according to the size of the material. (if focus is out after zooming operation, push AUTO FOCUS switch once. If the correct focus is not obtained yet, push Focus switch to adjust focusing manually.) B. When display
ページ14に含まれる内容の要旨
9. SPECIFICATIONS Lens f=4.1 —~-73.8mm(F1.4~3.0)÷conversion lens shooting Area (*1) 305 X 225mm (Max.) *1 20 X 15mrn(Min.) Zooming 18X)electric power zoom lens Electronic Zooming 4 X (18 X) optical zoom makes 72 X (Max.) Focusing Auto/One-shot Auto/Power Iris auto TV system NTSC PAL Image pick-up element 1/4 Inch CCD All picture element 81 8H X 508V 765H X 596V Effective picture element 768H X 494V 752HX582V Synchronization Internal Horizontal Resolution 470 TV Lines 4
ページ15に含まれる内容の要旨
Power supply AC Adaptor DC 6.5V (as standard Acc.) Power consumption 3.5W Dimensions 350(W) X 275(D) X 463(H)mm(SET-UP) 130(W) X 500(D) X 85(H)mm(FOLDED) Weight 1.5Kg Standard accessories Power cord Owners manual, Remote control unit A/V Cable, prevent dust cover, AC Adaptor X 1 o o Operation Temperature 5 C - 40 C Operation Humidity 20% - 80% (no condensation) *1 Shooting area will get a little bit smaller than 305X225mm when monitoring at overscanning. *2 All functions can be
ページ16に含まれる内容の要旨
AUDIO VISUAL/VIDEO PRODUCTS EIKI INDUSTRIAL CO., LTD. 4-12 Banzai-cho Kita-ku OSAKA, JAPAN Tel:6-631 l-9479~Fax:6-63I 1-8486 EIKI INTERNATIONAL, INC. 26794 Vista Terrace Drive, Lake Forest, CA92630-8 113 U.S.A Tel: 949-457-0200~ Fax: 949-457-7877 EIKI INTERNATIONAL, INC.CANADA BR. P.O. BOX 156 310 First Street Unit 2 Midland, Ontario, L4R 4K8 Canada Tel: 800-563-3454~ Fax: 800-567-4069 EIKI DEUTSCHLAND GmbH AM Frauwald 12
