ページ1に含まれる内容の要旨
English
User’s Guide (Basic Operations)
Be sure to read the “Safety Precautions” on page E-2 and “Operating Precautions” on page
E-6 before trying to use this projector.
This manual covers only basic operations, including how to set up the projector, basic projector
operations, and how to replace the lamp. For more detailed information, see the User’s Guide
(UsersGuide_English.pdf) on the CD-ROM that comes with the projector.
Contents
Safety Precautions ...................................
ページ2に含まれる内容の要旨
Safety Precautions Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference. About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below. This symbol indicates information
ページ3に含まれる内容の要旨
Safety Precautions Never touch the power cord or plug ● Looking into the lens or vents while your hands are wet. while lamp is on Doing so creates the risk of electric Never look directly into the lens or shock. vents while lamp is on. The strong When using this projector in the country light emitted by the projector creates where you purchased it, be sure to use the the risk of eye damage. power cord that came with it. Whenever ● Blocking the vents using the projector in another coun
ページ4に含まれる内容の要旨
Safety Precautions ● Location Caution Never locate the projector in any of the following types of locations. Doing so creates ● Power cord the risk of fire and electric shock. Near an area subject to strong vibration Misuse of the power cord creates the risk of fire and electric shock. Make An area subject to large amounts of moisture or dust sure that you always observe the following precautions. In a kitchen or other area exposed to oil smoke Do not locate the power cord near a
ページ5に含まれる内容の要旨
Safety Precautions ● Button battery Caution Keep the button battery out of the reach of small children to make sure ● Lamp replacement it is not swallowed accidentally. Before replacing the lamp, be sure to Should a button battery ever be turn off the projector and unplug it swallowed, contact a physician from the power outlet. Failure to do so immediately. creates the risk of electric shock. Take care when replacing a broken lamp. A broken lamp can cause glass fragments to Caution
ページ6に含まれる内容の要旨
Operating Precautions Lamp Handling Precautions Continued use of a lamp that has passed its lamp life increases the risk of the lamp rupturing. Replace the lamp with a new one as soon as possible Caution after the replacement message appears. Never touch the glass of the lamp with your fingers. Doing so can damage the lamp and shorten its life. The light source lamp is a consumable item. The average life of a lamp is approximately 2000 hours. After 2000 hours, a message appears to alert yo
ページ7に含まれる内容の要旨
Operating Precautions Other Precautions This projector is made of precision components. Failure to observe the following precautions can result in inability to correctly save data and malfunction. ● Never use or store the projector in the following locations. Doing so creates the risk of malfunction of and damage to the projector. Locations subjected to electrostatic charge Locations subjected to temperature extremes Locations where there is extreme moisture Locations subjected to sudden t
ページ8に含まれる内容の要旨
Operating Precautions ● Even if your projector is still within the warranty period, you will be charged for repair if a problem is due to running the projector non-stop for very long periods (like 24 hours) or if the projector was set up and used without following the “Setup Precautions” on page E-15 of this manual. ● Precaution when Handling the Projector after Use The exhaust vents on the front of the projector and the top of projector become very hot during operation, and will still be h
ページ9に含まれる内容の要旨
Unpacking As you unpack the projector, check to make sure that all of the items listed below are present. DATA PROJECTOR Remote Controller Test Battery (CR2025) (YT-35) (Loaded in remote controller.) AC Power Cord Special AV Cable Mini D-Sub Cable Soft Cases (projector and cords) CD-ROM User’s Guide (Basic Operations) “Read this first” Sheet Warranty Serial Number Stickers (2) with Barcode Using the User Documentation on the CD-ROM The CD-ROM that comes with the projector has a PDF f
ページ10に含まれる内容の要旨
Projector Features and Main Functions Slim and compact: B5 file size and a mere 32 mm slim (at thinnest part). Compact enough to install or use just about anywhere. Wide projection range, from a minimum of 0.84 meters: Wide angle 2X zoom allows projection even when projector-to-screen distance is severely limited. Minimum projection distance is 1.7 meters, even when projecting onto a 60-inch large screen. A selection of possible input sources: Computer RGB, composite video, and component
ページ11に含まれる内容の要旨
General Guide Never look into the lens while the projector is turned on. Never allow the intake and exhaust vents to become blocked, and make sure there is at least 30 cm (11.8 inches) clearance around the projector. Blocked vents can cause heat to build up, creating the risk of fire and Warning malfunction. Never touch the areas around the exhaust vents. These areas can become very hot, and create the risk of burn injury. [Bottom] Elevation adjustment foot Lamp cover Elevation adjustment
ページ12に含まれる内容の要旨
General Guide Remote Controller General Guide Remote control signal emitter [INPUT] key CLASS 1 LED PRODUCT [AUTO] key [ ] (Power) key [BLANK] key [ZOOM +] [ZOOM –] keys [FREEZE] key [FOCUS ] [VOLUME] key [FOCUS ] keys [COLOR MODE] key [D-ZOOM +] [D-ZOOM –] keys [MENU] key [KEYSTONE +] Cursor keys [KEYSTONE –] keys [POINTER] key [BRIGHT] key ([ ] key) [ENTER] key ([STYLE] key) [ECO] key ([ ] key) [ESC] key [ASPECT] key ([ ] key) [FUNC] key Preparing the Remote Controller The remote control
ページ13に含まれる内容の要旨
General Guide Replacing the Remote Controller Battery Before you can use the remote controller for the first time, you need to load the battery that comes with it. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Caution DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Misuse of a battery can cause it to leak and stain the area around it, or to explode, creating the risk of fire and personal injury. Make sure that you always observe the following precautions. Caution T
ページ14に含まれる内容の要旨
Getting Ready Setting Up the Projector Locate the projector on a desk, table, or stand that is firm and level. Make sure to allow sufficient space around the sides and back of the projector for proper ventilation. The following illustrations show how the projector should be oriented for optimum projection relative to the screen. Viewed from Above Viewed from the Side Screen Screen The center of the projector’s lens Make sure the should be aligned projector is at a with the horizontal right
ページ15に含まれる内容の要旨
Getting Ready Setup Precautions Note that the condition of the environment where you use the projector greatly affects its performance. Make sure that the following are the conditions of projector setup whenever you use it. Use a conveniently located power outlet that you can reach easily when you need to unplug the projector. Do not place any objects within the area indicated by the dashed line in the illustration below. Be especially careful that you never block intake and exhaust vents.
ページ16に含まれる内容の要旨
Getting Ready Adjusting the Projector Elevation Angle You can change the elevation angle of the projector in a range of 0 to 12 degrees. You can also make fine adjustments to the left and right side elevation angle when necessary. To change the projector elevation angle 1. Lift up the front of the projector and press the release button. This causes the elevation adjustment foot to drop from the bottom of the projector. Be sure to press the release button before trying to lower the elevatio
ページ17に含まれる内容の要旨
Getting Ready Connecting a Computer to the Projector You can use the projector to project an image of video output from a computer. Always turn off the projector and the computer before connecting them. Take care so the volume level of the computer is not set too high. Projector AV terminal RGB input terminal Computer To monitor terminal (analog RGB output terminal) Bundled mini D-Sub cable Audio cable To line output (commercially available) terminal Connecting to a Standard Video Device Yo
ページ18に含まれる内容の要旨
Getting Ready Connecting to a Component Video Output Device Some video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to connect the RGB input terminal of the projector to the component video output terminal of a video device. Always turn off the projector and the video device before connecting them. Projector AV terminal RGB input terminal To component video output terminal Video device Optional component video
ページ19に含まれる内容の要旨
Getting Ready Connecting a USB Device to the Projector (XJ-S36/XJ-S46 Only) If you have an XJ-S36/XJ-S46 model projector, you can connect any of the following USB devices to the projector’s USB port. USB Memory Device You can transfer image and movie data from your computer to a USB memory device* and take it along with you for projection with the XJ-S36/XJ-S46. The projector comes with software that converts Microsoft PowerPoint sheets to images, which you can then store to a USB memory d
ページ20に含まれる内容の要旨
Getting Ready Turning On the Projector Before performing any of the operations in this section, make sure you first set up the projector and connect to an output device. AC Power Cord Precautions Use the AC power cord that comes with the projector. Make sure that you use a power source with the same voltage as that specified for the projector. Do not share the outlet supplying power to the projector with other devices. If you are using an extension cord, make sure that the ampere rating of
