ページ1に含まれる内容の要旨
USER’S GUIDE
BOXLIGHT MP-38t
ページ2に含まれる内容の要旨
INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read Unplug this projector from wall outlet and refer servicing to before the product is operated. qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply b. If liquid has been spilled into the projector. before cleaning. Do not use liquid or aero
ページ4に含まれる内容の要旨
TABLE OF CONTENTS PAGE PAGE MENU OPERATION 30-31 FEATURES AND DESIGN 5 MODE SELECT 30 COMPATIBILITY 5 SOUND ADJUSTMENT 31 IMAGE RESOLUTION 5 LANGUAGE ADJUSTMENT 31 AUTOMATIC MULTISCANNING SYSTEM 5 MULTILANGUAGE MENU DISPLAY 5 VIDEO MODE 32-35 LASER POINTER FUNCTION 5 COLOR SYSTEM SELECT 32 OTHER FEATURES 5 VIDEO SOURCE SELECT 33 UNPACKING THE PROJECTOR 5 PICTURE IMAGE ADJUSTMENT 34 TRADEMARKS 5 PICTURE SCREEN ADJUSTMENT 35 INSTALLATION 6-9 COMPUTER MODE 36-48 NAME OF EACH PART OF THE PROJECTOR 6
ページ5に含まれる内容の要旨
FEATURES AND DESIGN This Boxlight MP-38t that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional color quality. COMPATIBILITY OTHER FEATURES The projector is compatible with many different types of This projector has Mo
ページ6に含まれる内容の要旨
INSTALLATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE PROJECTOR PROJECTION LENS INFRARED REMOTE RECEIVER FEET LOCK LATCH AIR INTAKE VENT REMOVABLE FEET LOCK LENS COVER LATCH SPEAKERS REAR OF THE PROJECTOR EXHAUST VENT INFRARED REMOTE RECEIVER CAUTION HOT AIR! Air blown from the exhaust vent is hot. Observe the following when handling your projector or choosing a location to install it. Keep heat-sensitive objects away from the exhaust port. If you set the projector on top of a metalli
ページ7に含まれる内容の要旨
INSTALLATION SETTING-UP THE PROJECTOR This projector is basically designed to project on a flat projection surface. POSITIONING: This projector can be focused from 4.6' (1.4 m) ~ 47.3' (14.4 m). Refer to the figure below as an example when positioning the projector to the screen. 400" Maximum Zoom ROOM LIGHT Minimum Zoom 300" The level of brightness in a room has a great 250" influence on picture quality. It is recommended 308" to limit ambient lighting in order to provide the 200" best i
ページ8に含まれる内容の要旨
INSTALLATION ADJUSTABLE FEET FEET LOCK LATCHES Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°. 1. Lift the front of the projector and press the FEET LOCK LATCHES on both sides of the projector. 2. Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to fine tune the position and the tilt. 3. To shorten the ADJUSTABLE FEET, lift the front of the projector and press and undo the FEET LO
ページ9に含まれる内容の要旨
INSTALLATION POWER REQUIREMENTS Your projector uses nominal input voltages of 100-120 VAC or 200-240 VAC. The projector automatically selects the correct input voltage. The projector is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure what type of power is supplied to your building. AC outlet side (Male
ページ10に含まれる内容の要旨
CONNECTING THE PROJECTOR TERMINAL OF THE PROJECTOR REAR OF THE PROJECTOR 1 2 3 MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 6 CONTROL PORT 1 CONTROL PORT 2 AUDIO 1 EXT. SP (8Ω) AUDIO 2 (STEREO) (STEREO) (STEREO) 7 4 12 5 R AUDIO L (MONO) VIDEO S-VIDEO Y Cb/Pb Cr/Pr 8 9 10 11 AUDIO INPUT JACKS COMPUTER INPUT-1 TERMINAL 8 1 Used to connect an audio input to the projector. Used to connect a computer to the projector. VIDEO INPUT JACK COMPUTER INPUT-2 TERMINAL 2 9 Used to connect a
ページ11に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING THE COMPUTER CONNECTING TO THE COMPUTER INPUT TERMINALS (1 and 2) Personal computers can be connected to the HDB15-pin (VGA) terminal on the projector. Connect the computer to these terminals using the VGA cable and VGA/Macintosh adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by any oth
ページ12に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER COMPUTER MONITOR CABLE (NOT PROVIDED) COMPUTER OUTPUT VGA CABLE (PROVIDED) PS/2 PORT AUDIO SERIAL PORT INPUT OUTPUT INPUT COMPUTER MONITOR INPUT 1 or 2 OUTPUT MOUSE CABLE FOR PS/2 PORT (PROVIDED) MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 CONTROL PORT CONTROL PORT 1 CONTROL PORT 2 OUTPUT 1 or 2 AUDIO 1 EXT. SP (8Ω) AUDIO 2 (STEREO) (STEREO) (STEREO) MOUSE CABLE FOR COMPUTER SERIAL PORT AUDIO INPUT (PROVIDED) 1 or 2 R AUDIO L (MO
ページ13に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER COMPUTER COMPUTER OUTPUT VGA CABLE (PROVIDED) AUDIO PS/2 PORT SERIAL PORT OUTPUT INPUT INPUT COMPUTER INPUT 1 or 2 MOUSE CABLE FOR PS/2 PORT (PROVIDED) MONITOR OUT CONTROL PORT COMPUTER IN 1 COMPUTER IN 2 OUTPUT 1 or 2 CONTROL PORT 1 CONTROL PORT 2 AUDIO 1 EXT. SP (8Ω) AUDIO 2 (STEREO) (STEREO) (STEREO) MOUSE CABLE FOR SERIAL PORT (PROVIDED) R AUDIO L (MONO) VIDEO S-VIDEO Y Cb/Pb Cr/Pr AUDIO CABLE COMPUTE
ページ14に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING A MACINTOSH DESKTOP COMPUTER COMPUTER MONITOR CABLE COMPUTER (NOT PROVIDED) OUTPUT VGA CABLE (PROVIDED) VGA/MAC ADAPTER (PROVIDED) AUDIO ADB PORT COMPUTER MONITOR OUTPUT INPUT INPUT 1 or 2 OUTPUT MOUSE CABLE FOR ADB PORT (PROVIDED) MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 CONTROL PORT 1 CONTROL PORT 2 EXT. SP (8Ω) AUDIO 1 AUDIO 2 (STEREO) (STEREO) (STEREO) CONTROL PORT OUTPUT 1 or 2 R AUDIO L (MONO) Y Cb/Pb Cr/Pr VIDEO S-VIDEO AUDIO CABLE
ページ15に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING A MACINTOSH POWERBOOK COMPUTER NOTE: The Macintosh PowerBook requires the use of the PowerBook Video COMPUTER Adapter shipped with the PowerBook. TO POWERBOOK VIDEO ADAPTER VGA CABLE (PROVIDED) VGA/MAC ADAPTER (PROVIDED) COMPUTER AUDIO ADB PORT INPUT 1 or 2 OUTPUT INPUT MOUSE CABLE FOR ADB PORT (PROVIDED) MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 CONTROL PORT 1 CONTROL PORT 2 AUDIO 1 EXT. SP (8Ω) AUDIO 2 (STEREO) (STEREO) (STEREO) CONTROL PORT OUTPUT 1 or 2 R AU
ページ16に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING THE VIDEO EQUIPMENT Connect to the video and audio outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV equipment. CONNECTING TO THE VIDEO INPUT JACK Connect the video output from the video equipment to this jack using the video cable. CONNECTING S-VHS VIDEO INPUT JACK Connect the S-VIDEO output from the video equipment to this jack using the S-video cable. The S-VIDEO jack has priority over the VIDEO (composite) jack.
ページ17に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING THE VIDEO EQUIPMENT VIDEO EQUIPMENT Satellite Video Camera DVD Player TV Tuner Video Cassette Recorder Video Disc Player L R VIDEO AUDIO OUTPUT OUTPUT VIDEO INPUT MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 CONTROL PORT 1 CONTROL PORT 2 S-VIDEO EXT. SP (8Ω) AUDIO 1 AUDIO 2 (STEREO) (STEREO) (STEREO) INPUT AUDIO INPUT R AUDIO L Y Cb/Pb Cr/Pr (MONO) VIDEO S-VIDEO AUDIO INPUT AUDIO COMPONENT INPUT VIDEO INPUT R L Y, Cb/Pb, Cr/Pr AUDIO S-
ページ18に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING TO THE EXT. SP. JACK (3.5 mm mini stereo type) This jack outputs stereo speaker sound which viewing on screen. If you use external speaker system, connect stereo type external speaker jack. Internal speaker sound is disconnected when speaker jack is connected. MONITOR OUT COMPUTER IN 1 COMPUTER IN 2 CONTROL PORT 1 CONTROL PORT 2 AUDIO 1 EXT. SP (8Ω) AUDIO 2 (STEREO) (STEREO) (STEREO) R AUDIO L (MONO) VIDEO S-VIDEO Y Cb/Pb Cr/Pr EXTERNAL S
ページ19に含まれる内容の要旨
BEFORE OPERATION BEFORE OPERATION CONTROLS AND INDICATORS FRONT INDICATORS TOP CONTROLS FRONT INDICATORS LAMP LAMP WARNING READY REPLACE TEMP. 1 2 3 4 TOP CONTROLS 10 5 ON-OFF MENU MODE 9 ZOOM FOCUS VOLUME SELECT 13 AUTO IMAGE NORMAL 11 6 14 12 8 7 19
ページ20に含まれる内容の要旨
BEFORE OPERATION LAMP REPLACEMENT INDICATOR 1 Light is orange when the Lamp life draws to an end. TEMPERATURE WARNING INDICATOR 2 Flashes red when internal projector temperature is too high. READY INDICATOR 3 Light is green when projector lamp is ready to be turned on. LAMP POWER INDICATOR 4 Light is dim when the projector is on. Light is brightened when the projector is in stand-by mode. 5 POWER ON/OFF BUTTON Used to turn the projector on or off. 6 VOLUME BUTTONS Used to adjust volume. 7 FOCUS
