ページ1に含まれる内容の要旨
USER’S GUIDE
BOXLIGHT CP-11t
ページ2に含まれる内容の要旨
INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio comm
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before d. If the projector does not operate normally by following the the product is operated. operating instructions. Adjust only those controls that are covered by the operating instructions as improper Read all of the instructions given here and retain them for later adjustment of other controls may result in damage and will use. Unplug this projector from AC power supply before often require extensive wo
ページ4に含まれる内容の要旨
TABLE OF CONTENTS FEATURES AND DESIGN 5 COMPUTER MODE 22 SELECTING COMPUTER MODE 22 SELECTING COMPUTER SYSTEM 22 PREPARATION 6 AUTOMATIC MULTISCANNING SYSTEM 22 COMPATIBLE COMPUTER SPECIFICATIONS 23 PC ADJUSTMENT 24 NAME OF EACH PART OF THE PROJECTOR 6 PICTURE IMAGE ADJUSTMENT 26 SETTING-UP THE PROJECTOR 7 ADJUST PICTURE IMAGE MANUALLY 26 POSITIONING THE PROJECTOR 7 NORMAL FUNCTION 26 ADJUSTABLE FEET 7 AUTO IMAGE FUNCTION 27 CONNECTING THE AC POWER CORD 8 VENTILATION 8 PICTURE POSITION ADJUSTMEN
ページ5に含まれる内容の要旨
FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Compatibility Automatic Multiscanning System This projector is compatible with many different This projector automatically tunes to most types of personal computers and video personal computers currently distributed b
ページ6に含まれる内容の要旨
PREPARATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE CABINET PROJECTION LENS LENS COVER CARRY HANDLE INFRARED REMOTE RECEIVER SPEAKER (Monaural) BACK OF THE CABINET EXHAUST VENT HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken. Do not put a flammable object near this vent. Keep heat-sensitive objects away from the exhaust vent. Do not touch this area especially screws and metallic parts. This a
ページ7に含まれる内容の要旨
PREPARATION SETTING-UP THE PROJECTOR POSITIONING THE PROJECTOR This projector is designed to project on a flat projection surface. The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m). Refer to the figure below to adjust the screen size. 35.4’ (10.8m) 24.0’ (7.3m) 300” 18.0’ (5.5m) 200” 11.8’ (3.6m) 150” 231” 4.6’ (1.4m) H1 100” 154” 115” 40” 77” 30” H2 30” 60” 100” 150” 200” 300” Screen Size (W x H) mm 610 x 457 1219 x 914 2032 x 1524 3048 x 2286 4064 x 3048 6096 x 4572 17.1”(435mm
ページ8に含まれる内容の要旨
PREPARATION CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V AC or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector wi
ページ9に含まれる内容の要旨
PREPARATION MOVING THE PROJECTOR Use the Carry Handle when moving the Projector. When moving the projector, replace the lens cover and retract feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended period, replace the lens cover, retract the Adjustable Feet and apply the dust cover supplied with this projector. CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR Do not drop or bump the projector, otherwise damages or malfunctions may result. When tr
ページ10に含まれる内容の要旨
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACK Connect the S-VIDEO output Connect the video output from from the video equipment to this the video equipment to this terminal. terminal. (Refer to P11.) S-VIDEO (Refer to P11.) AUDIO INPUT JACKS COMPUTER AUDIO INPUT JACK AUDIO Connect the audio outputs from R-AUDIO-L(MONO) VIDEO IN Connect the audio output from the video equipment to these the computer to this terminal. terminals. OUT (Refer to P12, 13
ページ11に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video / Audio Output S-VIDEO Output Used cables for connection ✽ • VIDEO CABLE ✽ Use either the VIDEO jack • S-VIDEO CABLE ✽ or S-VIDEO jack. When • AUDIO CABLE (stereo) the both jacks are ✽ These cables are not supplied connected, the S-VIDEO with this projector. jack has priority over the ✽ ✽ Video Audio Cable S-VIDEO Cable VIDEO jack. Terminals of the Projector S-V
ページ12に含まれる内容の要旨
CONNECTING THE PROJECTOR CONNECTING TO THE COMPUTER To connect to the computer, refer to the figure below. Used cables for connection • VGA CABLE • CONTROL CABLE FOR PS/2 PORT ✽ • CONTROL CABLE FOR SERIAL PORT,or ADB PORT ✽ • MAC ADAPTER ✽ • MONITOR CABLE ✽ • PC AUDIO CABLE (stereo) ✽ These cables are not supplied with this projector. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier To each terminal of
ページ13に含まれる内容の要旨
CONNECTING THE PROJECTOR S-VIDEO AUDIO R-AUDIO-L(MONO) VIDEO IN OUT COMPUTER IN MONITOR OUT CONTROL PORT COMPUTER MONITOR CONTROL AUDIO AUDIO IN OUT PORT IN OUT MAC ADAPTER (Not supplied) Set the switches as shown in the table below depend- ON Use one of these Control ON DIP ing on the RESOLUTION Cables corresponding 1 2 3 4 5 6 MODE that you want to with the terminal of your use before your turn on the computer. OFF projector and computer. 12 3 4 5 6 13" MODE (640 x 480) ON ON OFF OFF OFF OFF
ページ14に含まれる内容の要旨
LOCK ON ALL OFF BEFORE OPERATION OPERATION OF THE REMOTE CONTROL Left Side POWER ON-OFF BUTTON COMPUTER BUTTON Used to turn the projector on or off. (P19) ON-OFF COMPUTER VIDEO Used to select COMPUTER output source. (P22) VIDEO BUTTON ZOOM FOCUS VOLUME Used to select VIDEO source. (P29) D.ZOOM MUTE POINT BUTTON MENU BUTTON Used to move the pointer on MENU the MENU, to adjust the item, Used to select MENU or to pan the image in DIGITAL operation. (P17, 18) ZOOM mode. (P28) It is also used as
ページ15に含まれる内容の要旨
LOCK BEFORE OPERATION Operating Range ON-OFF Point the remote control toward the COMPUTER VIDEO projector (the Remote Receiver) ZOOM BUTTON whenever pressing the buttons. ZOOM FOCUS VOLUME BUTTON VOLUME Used to adjust zoom. Maximum operating range for the (P20) Used to adjust volume. remote control is about 16.4’ (5m) (P21) and 60° front and rear of the projector FOCUS BUTTON D.ZOOM MUTE D.ZOOM BUTTON Used to adjust focus. (P20) Used to turn the projector MENU into DIGITAL ZOOM mode and resize
ページ16に含まれる内容の要旨
BEFORE OPERATION TOP CONTROLS AND INDICATORS ZOOM BUTTONS Used to select zoom adjust. (P20) POWER ON–OFF BUTTON FOCUS BUTTONS Used to turn the projector on or off. (P19) Used to select focus adjust. (P20) ZOOM FOCUS VOLUME LAMP INDICATOR VOLUME BUTTONS This indicator is dim when the projector is turned on. Used to adjust volume. LAMP And bright when the (P21) projector is in stand-by mode. MODE BUTTON READY Used to select input source ON–OFF MENU MODE either Computer or Video. READY INDICATOR
ページ17に含まれる内容の要旨
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the WIRELESS REMOTE CONTROL ON-SCREEN MENU. Refer to the following pages to POINT BUTTON Used to move the operate each adjustment on the ON-SCREEN MENU. Pointer UP/ DOWN/ RIGHT/ LEFT. 1 MOVING THE POINTER Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL. SELECT BUTTON Used to select the item. 2 SELECT THE ITEM TOP C
ページ18に含まれる内容の要旨
BEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode. MODE MENU AUTO IMAGE MENU PC ADJUST MENU SETTING MENU Used to select Used to adjust Fine Used to adjust the Used to set the Display the Computer sync., Total dots, parameters to Menu and to reset input mode. and Picture Position match with the input Lamp Replacement (Refer to P22) automatically. signal format. Monitor Timer. (Refer to P27) (Refer to P24, 25) (Refer to P31) SYSTEM MENU IMAGE MENU POSITI
ページ19に含まれる内容の要旨
BASIC OPERATION TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTOR Complete the peripheral connections (with Computer, VCR, 1 etc.) before turning on the projector. (Refer to "CONNECTING TO THE PROJECTOR" on Pages 10~13 for connecting that equipment.) Connect the projector's AC power cord into a wall outlet. The 2 30 LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or 3 on the Top Control to ON. The LAMP POWER ind
ページ20に含まれる内容の要旨
BASIC OPERATION ADJUSTING THE IMAGE ZOOM ADJUSTMENT Press the ZOOM / button(s) on the Top Control or on the 1 Remote Control Unit to turn on the ZOOM mode. Press the ZOOM button to make the image larger, and press 2 the ZOOM button to make the image smaller. Zoom In the Computer mode, the image can be expanded, compressed, and panned with the Digital Zoom function. Refer to page 28 for the Digital Zoom operation. The message disappears after 4 seconds. FOCUS ADJUSTMENT Press the FOCUS
