ページ1に含まれる内容の要旨
Operator’s Guide
…for projection
9000PD
February 2005
78-6970-9380-1 Rev. B
Copyright © 2004, 3M.
All Rights Reserved.
ページ2に含まれる内容の要旨
(This page intentionally left blank for printed version)
ページ3に含まれる内容の要旨
3M™ Digital WallDisplay Contents Contents Introduction Thank You for Choosing 3M .........................................................................................................................5 Safety Information .........................................................................................................................................5 Intended Use .............................................................................................................................
ページ4に含まれる内容の要旨
C Co on nt te en nt ts s 3M™ Digital WallDisplay Menu System Menu Navigation .........................................................................................................................................26 Colorful—Bright Slider ...............................................................................................................................26 Warm—Cool Slider .................................................................................................................
ページ5に含まれる内容の要旨
3M™ Digital WallDisplay Introduction Introduction Thank You for Choosing 3M Thank you for choosing 3M equipment. This product has been produced in accordance with 3M’s highest quality and safety standards to ensure smooth and troublefree use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your meetings, presentations, and training sessions. Safety Information Please read, understan
ページ6に含まれる内容の要旨
Introduction 3M™ Digital WallDisplay WARNING To reduce the risk associated with hazardous voltage: • Do not attempt to service the Wall Display other than performing routine lamp replacement. Service should only be performed by a 3M authorized service provider. Aside from the projection lamp assembly, there are no serviceable parts inside the unit. • Switch power “OFF” and disconnect the plug from electrical outlet before replacing the lamp. Grasp plug and pull to disconnect. • Replace t
ページ7に含まれる内容の要旨
3M™ Digital WallDisplay Introduction WARNING To reduce the risk of environmental contamination due to lead based solder: • Don’t throw circuit boards in the trash. Dispose of circuit boards in accordance with your respective governmental agencies for hazardous waste. To reduce the risk associated with radio interference: • This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. To redu
ページ8に含まれる内容の要旨
Introduction 3M™ Digital WallDisplay IMPORTANT NOTES • In some countries, the voltage is not stable. This appliance is designed to operate within a range of 100~240 Vac. In these countries, it is recommended to install a power stabilizer unit. • Do not manually open or close the projection arm while the 3M Digital Wall Display is in operation. • Sa ve the shipping box and packing materials in the event the 3M Digital WallDisplay should ever need to be moved. • F or other types of wall materia
ページ9に含まれる内容の要旨
3M™ Digital WallDisplay Introduction Product Safety Label The following safety label is used on or within the 3M Digital WallDisplay to alert you to this area requiring your attention. fro m 3 M Wall Display Save These Instructions The information contained in this manual will help you operate and maintain your 3M Digital WallDisplay. Trademarks The 3M logo and 3M are registered trademarks of 3M Company. Vikuiti is a trademark of 3M Company. Microsoft, Windows, Windows NT, Word, Excel, PowerPoi
ページ10に含まれる内容の要旨
Introduction 3M™ Digital WallDisplay Netscape and the Netscape N and Ship’s Wheel logos are registered trademarks of Netscape Communications Corporation in the U.S. and other countries. Navigator and Communicator are also trademarks of Netscape Communications Corporation and may be registered outside the U.S. All other products are trademarks or registered trademarks of their respective companies. Patents 3M Digital WallDisplay is protected by Utility Patent 6,179,426 and Design Patent D442,20
ページ11に含まれる内容の要旨
3M™ Digital WallDisplay Introduction Model Identification and Differences Identify Model The nameplate, located behind the storage door, identifies the 3M Digital WallDisplay (DWD). Push the storage door to open it. The figure below shows the nameplate, and the table shows the model numbers and corresponding model names. Model Number Model Name 9000PD 3M Digital WallDisplay 9000PD for Projection Display 9200IC 3M Digital WallDisplay 9200IC with Interactive Collaboration 9200IW 3M Digital WallD
ページ12に含まれる内容の要旨
Introduction 3M™ Digital WallDisplay Contents The 3M Digital WallDisplay is shipped with the necessary cables required for standard VCR, PC, Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any are missing, please contact your place of purchase. R POWER MOUSE MENU MUTE BLANK INPUT ON 1 2 3 4 5 6 OFF Mac Serial Power Cable DVI-D Cable Mouse Cable adapter (US, UK, Euro) Remote Control (with batteries) VGA Cable USB 3-Conductor
ページ13に含まれる内容の要旨
3M™ Digital WallDisplay Introduction Part Identification 12 1 2 3 11 4 fro m 3 M 5 Wall Display 6 10 7 8 9 1. Facade 2. Lamp Housing Door (behind facade) 3. Projection Screen 4. Left Bezel 5. Remote Control Unit 13 6. Storage Door 7. Storage Door Window 8. On/Off Button 14 9. Infrared Remote Sensor 10. Connection Panel Door 11. Right Bezel 12. Speakers 13. Projection Head 14. Projection Arm 15. Connection Panel 16. Menu Keypad 17. Status LED Indicators 18. Master Power Switch 15 16 19. AC Powe
ページ14に含まれる内容の要旨
Introduction 3M™ Digital WallDisplay 3M Digital WallDisplay Features The 3M Digital WallDisplay combines the following features into one sleek, sophisticated package. • Full connectivity for computer or video presentations • Large 60˝ diagonal screen • 4:3 screen aspect ratio matches business applications and viewing data • Flat screen allows extra wide (up to 170°) viewing angles • Projection arm position guarantees image is in focus every time • Allows presenter to move without blocking
ページ15に含まれる内容の要旨
3M™ Digital WallDisplay Installation and System Setup Installation and System Setup Recommendation and Things to Consider Before Installing Location of Unit • Place near AC outlet. The AC power connection is located on the lower-left corner of the 3M Digital WallDisplay (the unit). The AC power cord supplied with the unit is 6 feet (2 m) long. • Service and screen replacement – The projection screen is removed from the side of the unit during replacement or service. For ease of replacement
ページ16に含まれる内容の要旨
Installation and System Setup 3M™ Digital WallDisplay Installing the Wall Bracket Unpacking Wall Bracket and Hardware 1. Place the shipping container face up on the floor. 2. Open the end of the shipping container. 3. Slide the shipping tray partially out the container. 4. Locate and Remove the wall bracket and hardware. The hardware is taped to the wall bracket. Installation for a Hollow Wall-Drywall 1. Determine the desired location of the unit. Locate all wall studs in area. 2. While hol
ページ17に含まれる内容の要旨
3M™ Digital WallDisplay Installation and System Setup Hanging the 3M Digital WallDisplay Unpacking the 3M Digital WallDisplay 1. Place the shipping container face up on the floor and open the end previous opened. 2. Slide the shipping tray out of the shipping container. 3. Remove the accessory box(es) from the top support. 4. Remove the top support. 5. Remo ve the plastic bag from the 3M Digital WallDisplay by lifting the top of the unit and pushing the bag towards the bottom of the unit
ページ18に含まれる内容の要旨
Installation and System Setup 3M™ Digital WallDisplay Hanging on the Wall 1. If possible, position the 3M Digital WallDisplay and shipping tray in front of the wall where the bracket is located. Position the unit so that the projection arm is closest to the wall. 2. Clear the path from the unit to the wall where it will be hanging. Note: Most of the weight is at the projection head/ speakers end of the 3M Digital WallDisplay. 3. With one person holding each side of the unit, carefully li
ページ19に含まれる内容の要旨
3M™ Digital WallDisplay Installation and System Setup System Setup It only takes a few minutes to connect the 3M Digital WallDisplay to your computer, VCR, DVD player, video conference unit, or other devices. The connection panel is located underneath the bottom right corner of the 3M Digital WallDisplay, under the Connection Panel Door. Press and release door to access connection panel. Note: Use the enclosed cables to ensure image and audio quality. Substituting cables of lesser quality may
ページ20に含まれる内容の要旨
Operation 3M™ Digital WallDisplay Operation Startup 1. Plug power cord into wall socket. 2. Flip on the Master Power Switch beneath the lower left corner of the 3M Digital WallDisplay, near the 3M label. This should stay on at all times. Now the 3M Digital WallDisplay is in standby mode. The large oval On/Off Button will be backlit amber after several seconds. 3. Press the On/Off Button in the center of the lower front panel. The projection arm will extend outward from its housing at th
