ページ1に含まれる内容の要旨
masterpage:Back masterpage:Back
E:\DATA\4296526111\4296526111VPLVW95ESUC\00COV_VPLVW9 E:\DATA\4296526111\4296526111VPLVW95ESUC\00COV_VPLVW9
Cover Cover
5ESU\02BCO.fm 5ESU\01COV.fm
4-296-526-11 (1)
Video Projector
Operating Instructions
VPL-VW95ES
Sony Corporation Printed in Japan
© 2011 Sony Corporation
VPL-VW95ES
VPL-VW95ES
VPL-VW95ES
4-296-526-11(1)
4-296-526-11 (1)
4-296-526-11 (1)
ページ2に含まれる内容の要旨
- Connect the equipment into an outlet on a WARNING circuit different from that to which the receiver is connected. - Consult the dealer or an experienced To reduce the risk of fire or radio/TV technician for help. electric shock, do not expose this apparatus to rain or You are cautioned that any changes or moisture. modifications not expressly approved in this manual could void your authority to operate To avoid electrical shock, do this equipment. not open the cabinet. Refer All int
ページ3に含まれる内容の要旨
guarantee matters please refer to the werden. Überlassen Sie addresses given in separate service or Wartungsarbeiten stets nur guarantee documents. qualifiziertem Fachpersonal. AVERTISSEMENT DIESES GERÄT MUSS GEERDET WERDEN. Afin de réduire les risques d’incendie ou d’électrocution, Für Kunden in Europa ne pas exposer cet appareil à Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 Konan, Minato-ku, la pluie ou à l’humidité. Tokyo, 108-0075 Japan. Afin d’écarter tout risque
ページ4に含まれる内容の要旨
For the Customers in Brazil only Note on use of the USB charging AC power adaptor AC-UD10 DESCARTE DE PILHAS E BATERIAS For the customer in the U.S.A. The following FCC statement applies only to the version of this model manufactured for safe in the USA. Other versions may not comply with FCC technical regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the Bateria Primária following two conditions: (1) this device Atenção: may not cause harmful inter
ページ5に含まれる内容の要旨
Table of Contents Precautions .........................................7 Projecting Projecting the Picture on the Location of Controls Screen ..............................................31 Front/Right Side .................................8 Turning Off the Power ............... 32 Rear/Bottom .......................................9 Using the Picture Position ............... 33 Remote Control ................................10 Selecting the Wide Screen Mode .... 34 Watching 3D Video Images ..
ページ6に含まれる内容の要旨
Others About the Control for HDMI ........... 67 About the x.v.Color ......................... 68 About the simulated 3D feature ....... 68 Troubleshooting ...............................69 Warning Indicators ..................... 72 Message Lists ............................. 73 Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) .............................................75 Cleaning the Air Filter ..................... 78 Cleaning and the Screen of the Projec
ページ7に含まれる内容の要旨
Safety precautions when using 3D Precautions Glasses Warning On safety � Do not put the 3D Glasses in a fire. � Do not disassemble the 3D Glasses. � Check that the operating voltage of your � Do not use, charge, store, or leave the 3D unit is identical with the voltage of your Glasses near a fire, or in places with a high local power supply. temperature, e.g., in direct sunlight, or in � Should any liquid or solid object fall into sun-heated cars. the cabinet, unplug the unit and have it
ページ8に含まれる内容の要旨
Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. Press the button and open Control panel the cover. LAMP/COVER LENS button (1 page 20) indicator M/m/
ページ9に含まれる内容の要旨
Location of Controls Rear/Bottom Remote control detector (1 page 20) Ventilation holes (intake) (1 page 14) Ventilation holes (intake) (1 page 14) Ventilation holes (intake) (1 page 14) Ventilation holes (intake) (1 page 14) Lamp cover (1 page 76) Adjusters (1 page 24) Filter holder (1 page 77) Ventilation holes (intake) (1 page 14) Projector suspension support attaching hole (1 page 89) 9
ページ10に含まれる内容の要旨
Remote Control Infrared transmitter LIGHT button Illuminates the buttons on ?/1 (ON/STANDBY) the remote control. switch (1 page 21) INPUT button (1 page 31) PICTURE MODE buttons (1 page 41) LENS ADJUSTMENT buttons (1 page 21) POSITION button RESET button (1 page 45) (1 page 33) M/m/
ページ11に含まれる内容の要旨
Connections and Preparations Connections and Preparations This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Unpacking Check the carton to make sure it contains the following items: � Remote control (1) and � AC power cord for the projector (1) � ImageDirector3 CD-ROM (1) Size AA (R6) manganese batteries (2) � Operating Instructions (this manual) (1) � 3D glasses (2) � Pouch for the 3D glasses (2) � USB c
ページ12に含まれる内容の要旨
VORSICHT Explosionsgefahr bei Verwendung falscher Batterien. Batterien nur durch den vom Hersteller empfohlenen oder einen gleichwertigen Typ ersetzen. Wenn Sie die Batterie entsorgen, müssen Sie die Gesetze der jeweiligen Region und des jeweiligen Landes befolgen. Installing batteries Two size AA (R6) batteries are supplied for Remote Control. To avoid risk of explosion, use size AA (R6) manganese or alkaline batteries. Caution about handling the remote control � Handle the remote control wit
ページ13に含まれる内容の要旨
Connections and Preparations Step 1: Installing the Projector The projector displays pictures output from Installing the projector in such a location a VCR or other device. may cause a malfunction of the unit due to The lens shift allows you to have broader moisture condensation or rise in options for placing the projector and temperature. viewing pictures easily. Near a heat or smoke sensor Before Setting Up the Projector Unsuitable installation Do not place the projector in the following
ページ14に含まれる内容の要旨
Improper use Do not do any of the following while using the projector. Blocking the ventilation holes (intake 15° or more or exhaust) Avoid using the projector tilted at an angle Ventilation holes of more than 15 degrees. (intake) Do not install the projector anywhere other than on a level surface or on the ceiling. Installing the projector in such a location may result in uneven color uniformity or reduce the reliability of the effects of the Ventilation holes lamp. (exhaust) If the p
ページ15に含まれる内容の要旨
Connections and Preparations AVERTISSEMENT Lors de l’installation de l’appareil, incorporer un dispositif de coupure dans le câblage fixe ou brancher la fiche d’alimentation dans une prise murale facilement accessible proche de l’appareil. En cas de problème lors du fonctionnement de l’appareil, enclencher le dispositif de coupure d’alimentation ou débrancher la fiche d’alimentation. WARNUNG Beim Einbau des Geräts ist daher im Festkabel ein leicht zugänglicher Unterbrecher einzufügen, o
ページ16に含まれる内容の要旨
Positioning the Projector and a Screen The installation distance between the projector and a screen varies depending on the size of the screen or whether or not you use the lens shift features. 1 Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector so that the center of the lens is within the area indicated in gray in the illustration. Use the values L, x and y in the table on page 17 or 18 as a guide. Screen * **
ページ17に含まれる内容の要旨
Connections and Preparations When using the 16:9 aspect ratio screen size Screen Size 40 60 80 100 120 150 200 250 300 SS (inches) (mm) 1016 1524 2032 2540 3048 3810 5080 6350 7620 minimum 1201 1825 2448 3072 3695 4631 6189 7748 9307 3 7 1 1 3 3 1 1 L (47 / ) (71 / ) (96 / ) (121) (145 / ) (182 / ) (243 / ) (305 / ) (366 / ) 8 8 2 2 8 4 8 2 maximum 1840 2782 3723 4664 5605 7017 9371 11724 14077 1 5 5 5 3 3 5 1 (72 / ) (109 / ) (146 / ) (183 / ) (220 / ) (276 / ) (369) (461 / )
ページ18に含まれる内容の要旨
When using the 4:3 aspect ratio screen size Screen Size 40 60 80 100 120 150 200 250 300 SS (inches) (mm) 1016 1524 2032 2540 3048 3810 5080 6350 7620 minimum 1480 2243 3006 3770 4533 5677 7585 9493 11401 3 3 3 1 1 5 5 3 7 L (58 / ) (88 / ) (118 / ) (148 / ) (178 / ) (223 / ) (298 / ) (373 / ) (448 / ) 8 8 8 2 2 8 8 4 8 maximum 2262 3414 4566 5718 6870 8598 11478 14357 17237 1 1 7 1 1 5 1 5 (89 / ) (134 / ) (179 / ) (225 / ) (270 / ) (338 / ) (452) (565 / ) (678 / ) 8 2 8 8 2
ページ19に含まれる内容の要旨
Connections and Preparations 2 Position the projector so that the lens is parallel to the screen. Top view Screen 3 Project an image on the screen and adjust the picture so that it fits the screen (1 page 20). Note When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications. This is not a malfunction of the projector. 19
ページ20に含まれる内容の要旨
Step 2: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. ON/STANDBY indicator 1 Remote control detector 2 ?/1 (ON/ STANDBY) switch 3, 4, 5 POSITION button Tip The ?/1 (ON/STANDBY), INPUT, MENU, and M/m/
