ページ1に含まれる内容の要旨
4-471-528-11 (1)
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-DX146/DX126
VPL-DW126
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2013 Sony Corporation
ページ2に含まれる内容の要旨
Table of Contents Overview Network Location and Function of Controls .... 4 Using Network Features ...................29 Main Unit .....................................4 Displaying the Control Window of the Projector with a Web Connector Panel ........................... 5 Browser ...................................29 Remote Commander and Control Confirming the Information Panel Keys ................................. 5 regarding the Projector ............30 Operating the Projector from a Pr
ページ3に含まれる内容の要旨
USB Media Viewer Using USB Media Viewer ................37 Thumbnail Mode ........................38 Option Menu ...............................38 Display Mode .............................39 Option Menu ...............................39 Slideshow Mode .........................39 Option Menu ...............................40 Others Indicators ..........................................41 Messages List ...................................42 Troubleshooting ...............................43 Replacin
ページ4に含まれる内容の要旨
B Overview Location and Function of Controls Main Unit qk 1 qj 2 qa qh qs 3 5 qd qg 4 qf k Connector panel (page 5) 6 0 l Security bar 7 Connects to a commercially available 8 security chain or wire. m Security lock 9 Connects to an optional security cable manufactured by Kensington. a Focus ring (page 13) For details, visit Kensington’s web site. http://www.kensington.com/ b Zoom ring (page 13) n Control panel keys (page 5) c Lens o Ventilation holes (intake) d Remote control detector p Spea
ページ5に含まれる内容の要旨
Overview Connector Panel 312 7 4 6 3 5 Input (pages 8, 10) Others a INPUT A d LAN connector (page 29) Video: RGB/YPBPR input connector e AC IN ( ∼) socket Audio: Audio input connector Connects the supplied AC power cord. b INPUT B f USB connector (Type A) ( ) Video: HDMI input connector (pages 11, 37) Audio: HDMI input connector g USB connector (Type B) ( ) c VIDEO (page 36) Video: Video input connector Audio: Audio input connector Note The audio inputs of INPUT A and VIDEO are shared. Remo
ページ6に含まれる内容の要旨
c Operating a menu (page 17) Notes MENU key *1: Use this key when inputting a RESET key computer signal. But it may not be ENTER /V/v/B/b (arrow) keys used depending on the resolution of RETURN key the input signal. *2: Use this key when inputting a computer signal.You cannot use this d Adjusting the image (page 13) key when “Type A USB”, “Type B ASPECT key (page 19) USB” or “Network” is selected as the KEYSTONE key (page 15) input. PATTERN key (page 15) * f Setting the energy–saving mode
ページ7に含まれる内容の要旨
Overview 3 Select “User” then press the b key. The setting items appear. User Lamp Mode High Auto Power Saving With No Input Off With Static Signal Lamp Dimming Standby Mode Standard :Sel RETURN :Back :Set 4 Press the V/v key to select the item then press the ENTER key. 5 Press the V/v key to select the setting value. 6 Press the ENTER key. The screen returns to the previous menu. For details on ECO Mode settings, see “Lamp Mode,” “With No Input,” “With Static Signal” and “Standby Mode” on
ページ8に含まれる内容の要旨
B Preparation Connecting the Projector Notes � Make sure all the equipment is powered off when connecting the projector. � Use the proper cables for each connection. � Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. � For more information, refer also to the instruction manuals of the equipment you are connecting. � Use a no-resistance audio cable. Co
ページ9に含まれる内容の要旨
Preparation USB connector (Type B) ( ) For connecting to a computer with a USB connector (“Projecting an Image using USB Connection” (page 36)). USB connector USB A-B cable (not (Type A) supplied) Computer LAN connector For connecting to a computer, tablet PC, or smartphone via a hub or router (“Presentation Function via Network” (page 33)). LAN connector LAN cable (straight type) (not supplied) Computer Wired connection Tablet PC/Smartphone Computer Hub, router (wireless), etc. Wireless co
ページ10に含まれる内容の要旨
� When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN module IFU-WLM3 (supplied), set “Access Point Setup” to “Manual” in the projector’s “WLAN Settings” (page 25). Connecting a Video equipment Connections with a DVD player or BD player are explained for each input signal. VIDEO For connecting video equipment with a video output connector. Video cable (not supplied) Video output connector Audio output connector Video equipment Audio cable (Phono plug × 2
ページ11に含まれる内容の要旨
Preparation INPUT B For connecting video equipment with an HDMI output connector. HDMI cable HDMI output (not supplied) connector Video equipment Notes � Use HDMI-compatible equipment which has the HDMI Logo. � Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) � The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal. Connecting a USB memory device USB
ページ12に含まれる内容の要旨
B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances and projected image sizes, see “Projection Distance” (page 53). 3 5 4 2 Video equipment Projector 1 6 Wall outlet Computer 1 Plug the AC power cord into the wall 6 When projecting a computer image, outlet. switch your computer’s output to external
ページ13に含まれる内容の要旨
Projecting/Adjusting an Image 7 Adjust the focus, size and position of the projected image (page 13). Adjusting the Projected image Focus Size (Zoom) Position Zoom ring Foot adjust button Front foot (adjustable) Focus ring Rear feet (adjustable) Projecting an Image 13
ページ14に含まれる内容の要旨
Adjusting the tilt of the projector with the foot adjust button/rear feet (adjustable) By changing the tilt of the projector with the foot adjust button/rear feet (adjustable), you can adjust the position of the projected image. 1 Press and hold the foot adjust button, then lift up the front of the projector to adjust the angle. 2 When the desired angle is achieved, release the foot adjust button to lock the position. 3 Set the angle of the projector precisely by turning the rear feet (ad
ページ15に含まれる内容の要旨
Projecting/Adjusting an Image Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted. In this case, set keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installation menu. 2 Use the V/v/B/b the keys to set the value. The higher the value, the narrower the top of the projected image. The lower the Increase the number value, the narrower the bottom. tow
ページ16に含まれる内容の要旨
Turning Off the Power 1 Press the ?/1 key on the unit or the remote commander. The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds of the message being displayed, shutdown is canceled. 2 Unplug the AC power cord from the wall outlet. To turn off without displaying confirmation message Press and hold the ?/1 key on the unit for a few seconds (page 42). ECO gauge This gauge indicates the current effectiveness of the projector’s ECO function. (For details on th
ページ17に含まれる内容の要旨
Adjustments and Settings Using a Menu B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. 1 Press the MENU key to display the operations in step 3 and then press the ENTER key to register the setting. menu. To return to the selection screen of the setting items, press the B or RETURN 2 Select the setting menu. key. As an aid to setting or adjusting Use the V/v key to select the set
ページ18に含まれる内容の要旨
The Picture Menu The Picture is used to adjust the picture for each input signal. Items Item descriptions Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture. Standard: Provides an image which is natural and well balanced. *1 Presentation : Provides a bright image, suitable for presentations. Blackboard: Provides an image suitable for displaying on a blackboard. Game: Provides an image suitable for viewing games. Cinema: Provides an image suitable for viewing mov
ページ19に含まれる内容の要旨
Adjustments and Settings Using a Menu The Screen Menu The Screen menu is used to adjust the size, position and aspect ratio of the projected image for each input signal. Items Item descriptions *1 Aspect Changes the aspect ratio of the projected image (page 21). VPL-DX146/DX126: 4:3: Displays the image to fit the maximum projected image size When the computer with an aspect ratio fixed to 4:3. signal is input 16:9: Displays the image to fit the maximum projected image size with an aspect rati
ページ20に含まれる内容の要旨
Items Item descriptions Adjust Signal Adjusts the image of a computer signal. Use this item if the edge of the image is cut, or is not displayed properly. *2 *3 APA Automatically adjusts the projected image to an optimum quality when you press the ENTER key (page 6). *2 Phase Adjusts the dot phase of the display pixel and the input signal. Set to the value where looks clearest. *2 Pitch The higher the value, the wider the horizontal image elements (pitch). The lower the value, the narrower t
