! ! WARNING This manual is intended for qualifi ed service personnel only. To reduce the risk of electric shock, fi re or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualifi ed to do so. Refer all servicing to qualifi ed service personnel. ! WARNUNG Die Anleitung ist nur für qualifi ziertes Fachpersonal bestimmt. Alle Wartungsarbeiten dürfen nur von qualifi ziertem Fachpersonal ausgeführt werden. Um die Gefahr eines elektrischen Sc
ページ3に含まれる内容の要旨
Table of Contents 1. Overview 1-1. Introduction ........................................................................1 1-2. Glossary of Terms ..............................................................1 1-3. Protocol Stack Structure ..................................................... 1 2. Common Commands 2-1. Sub Commands ..................................................................3 2-1-1. ITEM List .................................................................3 2-1-2. Infrared
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
1. Overview 1-1. Introduction The projector is remotely controllable over RS-232C as well as Ethernet. It is useful for setting up the projector away from the operator. This protocol manual describes the specifi cations such as packet format and procedures for controlling the projector. In the following sections below, the term “CONTROLLER” is used as a device which controls the projec- tor. CONTROLLER can be a PC or other specifi c device that is able to handle RS-232C or Ethernet. Although mo
ページ6に含まれる内容の要旨
SDCP Specific Command (1) RS-232C Sub Command AMX Device Discovery Simplified Command Asynchronous RS-232C Fig. 1-1 RS-232C Protocol Stack “RS-232C” layer is physical portion and “Asynchronous” is the traditional protocol layer as shown in the section 3-2. (2) Ethernet HTTP PJLink SNMP SDAP DDDP Sub Command Simplified Command SDCP (PJ Talk) TCP/IP UDP/IP Ethernet Fig. 1-2 Ethernet Protocol Stack Ethernet corresponding model VPL-FX30, VPL-FX35, VPL-FX500L, VPL-F400X, VPL-F500X, VPL-F700XL, VP
ページ7に含まれる内容の要旨
2. Common Commands 2-1. Sub Commands Sub Command is the value which is used by Simplifi ed Command. Value is assigned for executing func- tion. For example, if you want to change the picture mode, the appropriate value assigned for the desired picture mode should be chosen. 2-1-1. ITEM List Item lists are described below. Tables are shown per function category. VPL-FX30/FX35/F400X/F500X ITEM List For Picture
Remarks Item Number Data Item Upper byte Lower byte Data Byte PICTUR
ページ8に含まれる内容の要旨
ITEM List For Screen
Remarks Item Number Data Item Upper byte Lower byte Data Byte ASPECT 00h 20h FULL 0000h Set/Get NORMAL 0001h ZOOM 0003h FULL1 0007h FULL2 0008h 4:3 0009h 16:9 000Ah OVER SCAN 00h 23h OFF 0000h ON 0001h ITEM List For Setup
Remarks Item Number Data Item Upper byte Lower byte Data Byte INPUT TERMINAL 00h 01h VIDEO 0000h Set/Get SVIDEO 0001h INPUTA 0002h INPUTB 0003h INPUTC 0004h PIC MUTING 00h 30h OFF 0000h ON 0001h AUDIO MUTING 00h 31h O
ページ9に含まれる内容の要旨
ITEM List For Status
Remarks Item Number Data Item Upper byte Lower byte Data Byte STATUS ERROR1 01h 01h NO ERROR 00h Get only LAMP ERROR 01h FAN ERROR 02h COVER ERROR 04h TEMP ERROR 08h D5V ERROR 10h POWER ERROR 20h WARNING TEMP 40h NVM DATA ERROR 80h STATUS POWER 01h 02h STANDBY 00h START UP 01h STARTUP LAMP 02h POWER ON 03h COOLING1 04h COOLING2 05h SAVING COOLING1 06h SAVING COOLING2 07h SAVING STANDBY 08h LAMP TIMER 01h 12h VALUE xxh SUB ROM VERSION 01h 1Dh VALUE xxh MAI
ページ10に含まれる内容の要旨
VPL-FX500L/F700XL ITEM List For Picture
Remarks Item Number Data Item Upper byte Lower byte Data Byte PICTURE MODE 00h 02h DYNAMIC 0000h Set/Get STANDARD 0001h PRESENTATION 0002h CONTRAST 00h 10h VALUE 0000h-0064h(0-100) BRIGHTNESS 00h 11h VALUE 0000h-0064h(0-100) COLOR 00h 12h VALUE 0000h-0064h(0-100) HUE 00h 13h VALUE 0000h-0064h(0-100) SHARPNESS 00h 14h VALUE 0000h-0064h(0-100) COLOR TEMP 00h 17h HIGH 0000h MID 0001h LOW 0002h HIGH BRIGHTNESS 0003h CUSTOM1 0004h CUSTOM2 00
ページ11に含まれる内容の要旨
ITEM List For Setup
Remarks Item Number Data Item Upper byte Lower byte Data Byte INPUT TERMINAL 00h 01h VIDEO 0000h Set/Get SVIDEO 0001h INPUTA 0002h INPUTB 0003h INPUTC 0004h PIC MUTING 00h 30h OFF 0000h ON 0001h AUDIO MUTING 00h 31h OFF 0000h ON 0001h INPUT A SIGNAL-SEL 00h 32h AUTO 0000h COMPUTER 0001h COMPONENT 0002h VIDEOGBR 0003h PICTURE MUTING 00h 3dh IMAGE 0000h MODE SHUTTER 0001h LAMP MODE 00h 40h HIGH 0000h STANDARD 0001h LAMP LIGHT MODE 00h 41h AUTO 0001h FIXED LA
ページ12に含まれる内容の要旨
ITEM List For Status
Remarks Item Number Data Item Upper byte Lower byte Data Byte STATUS ERROR1 01h 01h NO ERROR 00h Get only LAMP ERROR 01h FAN ERROR 02h COVER ERROR 04h TEMP ERROR 08h D5V ERROR 10h POWER ERROR 20h WARNING TEMP 40h NVM DATA ERROR 80h STATUS POWER 01h 02h STANDBY 00h START UP 01h STARTUP LAMP 02h POWER ON 03h COOLING1 04h COOLING2 05h SAVING COOLING1 06h SAVING COOLING2 07h SAVING STANDBY 08h LAMP TIMER 01h 12h VALUE xxh SUB ROM VERSION 01h 1Dh VALUE xxh MAI
ページ13に含まれる内容の要旨
VPL-EX100/EX120/EX145/EX175 ITEM List For Picture
Remarks Item Number Data Item Upper byte Lower byte Data Byte PICTURE MODE 00h 02h DYNAMIC 0000h Set/Get STANDARD 0001h PRESENTATION 0002h GAME 0003h LIVING 0004h CINEMA 0005h CONTRAST 00h 10h VALUE 0000h-0064h(0-100) BRIGHTNESS 00h 11h VALUE 0000h-0064h(0-100) COLOR 00h 12h VALUE 0000h-0064h(0-100) HUE 00h 13h VALUE 0000h-0064h(0-100) SHARPNESS 00h 14h VALUE 0000h-0064h(0-100) VOLUME 00h 16h VALUE 0000h-0064h(0-100) COLOR TEM
ページ14に含まれる内容の要旨
ITEM List For Setup
Remarks Item Number Data Item Upper byte Lower byte Data Byte INPUT TERMINAL 00h 01h VIDEO 0000h Set/Get SVIDEO 0001h INPUTA 0002h * INPUTB 0003h PIC MUTING 00h 30h OFF 0000h ON 0001h AUDIO MUTING 00h 31h OFF 0000h ON 0001h INPUT A SIGNAL-SEL 00h 32h AUTO 0000h COMPUTER 0001h COMPONENT 0002h VIDEOGBR 0003h PICTURE MUTING 00h 3dh IMAGE 0000h MODE LAMP MODE 00h 40h HIGH 0000h STANDARD 0001h *: This item is disabled for VPL-EX100. ITEM List For Infrared Remot
ページ15に含まれる内容の要旨
ITEM List For Status
Remarks Item Number Data Item Upper byte Lower byte Data Byte STATUS ERROR1 01h 01h NO ERROR 00h Get only LAMP ERROR 01h FAN ERROR 02h COVER ERROR 04h TEMP ERROR 08h D5V ERROR 10h POWER ERROR 20h WARNING TEMP 40h NVM DATA ERROR 80h STATUS POWER 01h 02h STANDBY 00h START UP 01h STARTUP LAMP 02h POWER ON 03h COOLING1 04h COOLING2 05h SAVING COOLING1 06h SAVING COOLING2 07h SAVING STANDBY 08h LAMP TIMER 01h 12h VALUE xxh SUB ROM VERSION 01h 1Dh VALUE xxh MAI
ページ16に含まれる内容の要旨
VPL-FX30 12 2-1-2. Infrared Remote Command Code VPL-FX30/FX35/F400L/F500X 15bit category x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x BLACK LEVEL PICTURE ADJ TOGGLE ADJ TOGGLE 1x VOL VOL AUDIO POWER CONTRAST CONTRAST COLOR COLOR BRIGHTNESS BRIGHTNESS LARGE SMALL MUTING TOGGLE + _ + _ + _ 2x HUE HUE SHARPNESS SHARPNESS PICTURE STATUS STATUS MENU VIDEO INPUT A INPUT B POWER POWER + _ + _ MUTING ON OFF ON OFF 3x CURSOR CURSOR CURSOR CURSOR → ← ↑ ↓ 4x PITCH SHIFT 5x INPUT ENTER S VIDEO TOGGL
ページ17に含まれる内容の要旨
VPL-FX30 13 VPL-FX500L/F700XL 15bit category x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x BLACK LEVEL PICTURE ADJ TOGGLE ADJ TOGGLE 1x VOL VOL AUDIO POWER CONTRAST CONTRAST COLOR COLOR BRIGHTNESS BRIGHTNESS LARGE SMALL MUTING TOGGLE + _ + _ + _ 2x HUE HUE SHARPNESS SHARPNESS PICTURE STATUS STATUS MENU VIDEO INPUT A INPUT B POWER POWER + _ + _ MUTING ON OFF ON OFF 3x CURSOR CURSOR CURSOR CURSOR → ← ↑ ↓ 4x PITCH SHIFT 5x INPUT ENTER S VIDEO TOGGLE 6x INPUT C 7x LENS SHIFT LENS SHIFT LENS L
ページ18に含まれる内容の要旨
VPL-FX30 14 VPL-EX100/EX120/EX145/EX175 15bit category x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x BLACK PICTURE LEVEL ADJ ADJ TOGGLE TOGGLE 1x VOL VOL:SMALL AUDIO POWER CONTRAST CONTRAST COLOR COLOR BRIGHTNESS BRIGHTNESS LARGE MUTING TOGGLE + _ + _ + _ * 2x HUE HUE SHARPNESS SHARPNESS PICTURE STATUS STATUS MENU VIDEO INPUT A INPUT B POWER POWER + _ + _ MUTING ON OFF ON OFF 3x CURSOR CURSOR CURSOR CURSOR → ← ↑ ↓ 4x PITCH SHIFT 5x INPUT ENTER S VIDEO TOGGLE 6x 7x RESET TEST PATTERN *Th
ページ19に含まれる内容の要旨
2-2. Reply
Item Number Data Item Data Upper byte Lower byte ACK Complete 00h 00h NAK Undefi ned Command 01h 01h Size Error 04h Select Error 05h Range Over 06h Not Applicable 0Ah Check Sum Error F0h 10h Framing Error 20h Parity Error 30h Over Run Error 40h Other Comm Error 50h Error description Check Sum Error A check sum error occurred. Framing Error A framing error occurred. Parity Error A parity error occurred. Over Run Error An overrun error occurred. Other Comm Error Another error o
ページ20に含まれる内容の要旨
3. RS-232C 3-1. Connection Communication is enabled by the use of a D-Sub 9 Pin cross (reverse) cable. The pin assignment of D-Sub 9 Pin and D-Sub 25 Pin is as follows. D-Sub 9 Pin D-Sub 25 Pin Name Shell = FG 1 FG Grounding for safety protection or cable shield 3 2 TxD Transmission data 2 3 RxD Reception data 7 4 RTS Transmission request 8 5 CTS Transmission permission 6 6 DSR Data set ready 5 7 SG GND for signal 1 8 DCD Data channel signal carrier detection 4 20 DTR Data terminal ready 9 22 RI
