ページ1に含まれる内容の要旨
.
C
.
L
.
L
,
S
T
C
U
I
D
S
O
O
R
1
P
4
0
R
0
E
1
M
F
U
I
MX196_EN.book Page 1 Tuesday, June 27, 2006 1:43 PM
Integrated High Definition
®
DLP Projection Television
HIGH-DEFINITION TELEVISION
62MX196
72MX196
IMPORTANT NOTE
Before connecting, operating, or adjusting this product, carefully
read the Important Safety, Installation, Care, and Service
information in the separate Installation Guide.
For an overview of steps for setting up your new TV, see page 7.
Note: To display a High Definit
ページ2に含まれる内容の要旨
MX196_EN.book Page 2 Tuesday, June 27, 2006 1:43 PM CAUTION: This television is for use only with the Toshiba stand indicated below. Use with other Important notes about your carts or stands is capable of resulting in ® instability, causing possible injury. DLP projection TV Television Stand Model 62MX196 ST 6296 1) The light source for this TV is a projection lamp unit with a 72MX196 ST 7296 limited service life. When the lamp wears out, the picture may become dark or black or th
ページ3に含まれる内容の要旨
MX196_EN.book Page 3 Tuesday, June 27, 2006 1:43 PM “Voice announce” feature Trademark Information When certain non-standard conditions occur, the LEDs on the TV will blink and the TV will play a recorded “voice announcement” describing the condition (see the • This product incorporates copyright protection technology that is LED indication table on page 83 for the specific conditions protected by U.S. patents and other intellectual property rights. Use that include a voice announcement
ページ4に含まれる内容の要旨
MX196_EN.book Page 4 Tuesday, June 27, 2006 1:43 PM Contents FCC Declaration of Conformity Compliance Statement Selecting the POP window audio out. . . . . . . . . . . . . . . 41 (Part 15): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 POP double-window aspect ratio. . . . . . . . . . . . . . . . . . 41 Using the FREEZE feature . . . . . . . . . . . . . . . . . . . . . . . . . . 41 ® Important notes about your DLP projection TV . . . . . . . . . . . 2 Adjusting t
ページ5に含まれる内容の要旨
MX196_EN.book Page 5 Tuesday, June 27, 2006 1:43 PM ™ Chapter 7: Using the THINC home network feature . . . . . . . .60 A. Connecting the TV to your home network . . . . . . . . . . . 60 B. Setting up the network address . . . . . . . . . . . . . . . . . . . . 60 Automatically setting up the network address . . . . . . . . 60 Manually setting up the network address. . . . . . . . . . . . 61 Resetting the network address . . . . . . . . . . . . . . . . . . . . 62 C. Setting up file sharing on
ページ6に含まれる内容の要旨
MX196_EN.book Page 6 Tuesday, June 27, 2006 1:43 PM Chapter 1: Introduction NOTICE OF POSSIBLE TV STAND INSTABILITY Features of your new TV DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH! Use this TV only with The following are just a few of the many exciting features of the TOSHIBA TV stand listed in the ® your new Toshiba widescreen, integrated HD, DLP “Specifications” section of this manual. Use with other projection TV: stands may result in instability, causing possible injury or
ページ7に含まれる内容の要旨
MX196_EN.book Page 7 Tuesday, June 27, 2006 1:43 PM Chapter 1: Introduction 11 After you plug in the TV power cord, the yellow LED Overview of steps for installing, (on the TV front) will blink 3 times. Wait several seconds until the yellow LED stops blinking and then press p on setting up, and using your new TV the TV or remote control. See “LED indications” (- page 83). Follow these steps to set up your TV and begin using its many 12 See “Menu layout and navigation” for a quick overview
ページ8に含まれる内容の要旨
MX196_EN.book Page 8 Tuesday, June 27, 2006 1:43 PM Chapter 1: Introduction TV front and side panel controls and connections TV front Side panel 1 LAMP 11 3 POWER 7* 2 4 TIMER 8 REC 5 6 9 10 Control panel 1 Remote sensor (behind the screen) — Point the remote 7 *MENU (ENTER) — Press to access the menu system control toward this area of the TV screen (- “Remote (- pages 22–23). When a menu is on-screen, the MENU control effective range” on page 11). button on the TV’s side control panel fu
ページ9に含まれる内容の要旨
MX196_EN.book Page 9 Tuesday, June 27, 2006 1:43 PM Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see the Installation Guide. 12 34 56 7 1 VIDEO 1 IN — Composite video and analog audio inputs 4 A/V OUT — Standard composite video and analog audio plus optional S-video inputs for connecting devices with outputs for connecting a VCR for editing and dubbing. composite video or S-video output. When the POP double-window is open, the active wi
ページ10に含まれる内容の要旨
MX196_EN.book Page 10 Tuesday, June 27, 2006 1:43 PM Chapter 1: Introduction 8 9 10 11 12 ™ ™ ™ 8 HDMI 1 IN and HDMI 2 IN — Two High-Definition 11 RJ-45 (Ethernet) (THINC system**) — For Multimedia Interface inputs receive digital audio and connecting the TV to your home network. See boxed note uncompressed digital video from an HDMI device or below. uncompressed digital video from a DVI device. ™ **THINC system Also see item 2. (Toshiba Home Interactive Network Connection) Note: HDMI 1 (a
ページ11に含まれる内容の要旨
MX196_EN.book Page 11 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control Installing the remote control Remote control effective range batteries For optimum performance, aim the remote control directly at the TV remote sensor. Make sure there are no obstructions between the remote control and the TV. To install the remote control batteries: 1 Slide the battery cover off the back of the remote control. Point remote control toward remote sensor on front of TV. 2 Install two “AA
ページ12に含まれる内容の要旨
MX196_EN.book Page 12 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control 1 LIGHT illuminates the keypad for five seconds. Learning about the remote control The MODE SELECT key that is being selected blinks three times. The buttons used for operating the TV only are described here. 2 SLEEP accesses the sleep timer (- page 52). For a complete list of the remote control’s functions, see the 3 POWER turns the TV on and off. When the TV is on, the remote control functional key
ページ13に含まれる内容の要旨
MX196_EN.book Page 13 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control 17 EXIT closes on-screen menus and the TV Guide ™ On Screen system. 18 INFO provides detailed information on highlighted items ™ in the TV Guide On Screen system (- TV Guide ™ On Screen Interactive Program Guide). 19 MUTE reduces or turns off the sound (- page 44). 20 CH RTN returns to the last viewed channel (- page 36), or stops the picture viewer slide show (- page 68). Also can be used to switch
ページ14に含まれる内容の要旨
MX196_EN.book Page 14 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control Remote Control functional key chart DVD/VCR combo REMOTE Toshiba TV SAT Receiver/ CD CABLE VCR PVR CONTROL KEY (TV) (satellite) AMP (AUDIO) DVD/ DVD-R MODE Remote control device mode selection SELECT *1 LIGHT Lights the remote key. SLEEP Sleep timer s TV s TV s TV s TV s TV s TV s TV POWER Power Power Power Power Power Power Power Power 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 AV input 1 Digit 1 D
ページ15に含まれる内容の要旨
MX196_EN.book Page 15 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control DVD/VCR combo REMOTE Toshiba TV SAT Receiver/ CD CABLE VCR PVR CONTROL KEY (TV) (satellite) AMP (AUDIO) DVD/ DVD-R CH RTN/ Previous Previous Previous --- DVD RTN --- --- --- DVD RTN channel channel channel On-screen RECALL s TV s TV s TV s TV s TV s TV s TV display Sound Sound Sound Sound Sound Sound Sound MUTE Sound mute *2 *2 *2 *2 *2 *2 *2 mute mute mute mute mute mute mute Slow FWD* Slow FWD
ページ16に含まれる内容の要旨
MX196_EN.book Page 16 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control Using the remote control to operate Programming the remote control to your other devices operate your other devices Your TV remote control has one dedicated TV mode and five programmable multi-brand modes: CABLE/SAT, DVD, Device code setup VCR/PVR, AUX 1, and AUX 2. The default device modes and programmable device modes are listed below. 1 Find the code for your device brand in the remote control dev
ページ17に含まれる内容の要旨
MX196_EN.book Page 17 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control 5 To control the TV, press the TV MODE SELECT button. Using the volume lock feature (8000) Note: By default (factory setting), the remote control’s volume keys Although the TV remote control includes codes for many (z Z and W) are locked to the “TV” device mode. devices, it may not include codes for some or all of the The remote control will operate the TV’s volume, even when features on certain dev
ページ18に含まれる内容の要旨
MX196_EN.book Page 18 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control DirecTV 0099, 0247, 0392, DVD players 0566, 0639, 0724, Multi-brand remote 0749, 0819, Brand Code 1076, 1108, 1109, Aiwa 0641 control device codes 1142, 1377, 1392, Akai 0695, 0770, 1089 1414, 1442, Alco 0790 1443, 1444, 1609, Allegro 0869 TVs 1639, 1640, 1749, Amphion Media 1856 Works 0872 Brand Code Dish Network System 0775, 1005, 1170, AMW 0872 Toshiba 1524 1505, 1775 Apex Digital 0672, 0717,
ページ19に含まれる内容の要旨
MX196_EN.book Page 19 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control JBL 0702 Sharp 0630, 0675, 0752, DirecTV 0739 1256 JSI 1423 Durabrand 0038, 0039 Sharper Image 1117 JVC 0558, 0623, 0867, Dynatech 0000 1164 Sherwood 0633, 0770, 1043, Electrohome 0037, 0043 1077 jWin 1049, 1051 Electrophonic 0037 Kawasaki 0790 Shinsonic 0533, 0839 Emerex 0032 Sonic Blue 0869, 1099 Kenwood 0490, 0534 Emerson 0000, 0002, 0037, Sony 0533, 0864, 1033, KLH 0717, 0790, 1020, 0043, 0061, 012
ページ20に含まれる内容の要旨
MX196_EN.book Page 20 Tuesday, June 27, 2006 1:43 PM Chapter 2: Using the remote control Mitsubishi 0043, 0061, 0067, Singer 0072 Microsoft 1972 0075, 0173, 0807 Sonic Blue 0614, 0616 Mind 1972 Motorola 0035, 0048 Sony 0000, 0032, 0033, Niveus Media 1972 MTC 0000, 0240 0034, 0035, 0636, Northgate 1972 1032, 1972 Multitech 0000, 0072 Panasonic 0616 NEC 0038, 0040, 0041, Stack 9 1972 Philips 0618, 0739 0067, 0104 STS 0042 RCA 0880 Nikko 0037 Sylvania 0000, 0035, 0043, ReplayTV 0614, 0616 0081
