ページ1に含まれる内容の要旨
OWNER’S MANUAL
Integrated High Definition
™
DLP Projection Television
H I G H-DEFINITION TELEVISION
Owner’s Record
Note: High definition programming is required to view High
Definition TV broadcasts. Please contact your cable or The model number and serial number are on the back
satellite provider.
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
42HM66
Copyright © 2006
ページ2に含まれる内容の要旨
1 Important Information Important Information 1 Dear Customer, NOTICE OF POSSIBLE TV STAND INSTABILITY Thank you for purchasing this Toshiba TV. This manual CAUTION: This television is for use only with the Toshiba stand will help you use the many exciting features of your new listed below. Use with other carts or stands is capable of resulting in TV. Before operating the TV, please read this manual instability causing possible injury. completely, and keep it nearby for future reference.
ページ3に含まれる内容の要旨
English 1 Important Information Important Information 1 Important Safety Instructions 16) WARNING: This product contains a lamp to project the picture, and requires special safety precautions: 1) Read these instructions. • See pages 32-33 for instructions on lamp unit replacement and care. 2) Keep these instructions. • DO NOT attempt to service this product except as specified on 3) Heed all warnings. pages 32-33. The only user-serviceable item in this product is the lamp unit. 4) F
ページ4に含まれる内容の要旨
1 Important Information (continued from previous page) (continued from previous column) Installation Care 27) Always make sure the antenna system is properly grounded 33) For added protection of your TV from lightning and power to provide adequate protection against voltage surges and surges, always unplug the power cord and disconnect the built-up static charges (see Section 810 of the National antenna from the TV if you leave the TV unattended or unused Electric Code). for long perio
ページ5に含まれる内容の要旨
English Important Information 1 Handling the TV Hold the TV as indicated in the illustrations below. To ensure balance and avoid damage, ALWAYS have at least two people carry the TV. Place hands here when moving the TV. Installing the TV Attaching the TV to a wall or pillar . Securely attach a sturdy cord or chain to each wire clip on the rear of the TV. . Attach the cord or chain to a wall or pillar. Make sure Recommended TV Stand: the TV is at least in Toshiba Stand Model ST
ページ6に含まれる内容の要旨
1 Important Information Important notes about your DLP™ projection TV 5) Always sit approximately 10–25 feet away from the TV and 1) The light source for this TV is a projection lamp unit with a as directly in front of it as possible. The picture quality may be limited service life. When the lamp wears out, the picture may affected by your viewing position and length of viewing time. If become dark or black or the lamp may fail, at which time you you sit too closely to the TV for too long
ページ7に含まれる内容の要旨
English Introduction 2 Welcome to Toshiba Thank you for purchasing this Toshiba TV, one of the most innovative DLP™ projection TVs on the market. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible. • This manual applies to models HM66. Before you start reading, check the model number on the back of your TV. • Instructions in this manual are based on using the remote control. You also can use the controls on the TV side control panel i
ページ8に含まれる内容の要旨
3 Connecting and Checking the Antenna Connecting an antenna cable E. Connection with Antenna Cable 1. Cable without a CATV Converter 2. VHF/UHF Combination Antenna Cable TV lead-in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) or 300-75 ohm ADAPTOR RF IN (Not supplied) 300 ohm twin-lead (flat) 3. Separate VHF/UHF Antenna Home Antenna VHF ANTENNA terminal (75 ohm) UHF ANTENNA 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead IN OUT or 75 ohm coaxial
ページ9に含まれる内容の要旨
English Controls and Connections 4 Side panel controls . MENU — Opens and closes the menu system. 2. CHANNEL ▲▼ — When no menu is on-screen, change the channel. When a menu is on-screen, function as up/down navigation. . VOLUME ◄ ► — When no menu is on-screen, adjust the volume. When a menu is on-screen, function as left/right navigation. . INPUT — Changes the image signal source: TV, AV1 , S-Video, ColorStream HD-1, ColorStream HD-2, HDMI. Front panel 6. IR sensor — Receives infrared s
ページ10に含まれる内容の要旨
4 Controls and Connections Back panel connections To view a source connected to one of the inputs on the back panel, press INPUT on the side panel to select the applicable input: TV, AV1, S-Video, ColorStream HD-1, ColorStream HD-2, or HDMI. Note: • The TV’s INPUT key is on the side panel (not the front). • For details on the video output requirements of your other devices, refer to the owner’s manuals for those devices. • Cables are not supplied. Component video DVD player The unauthorized
ページ11に含まれる内容の要旨
English Using the remote control 5 Installing the remote control batteries . Remove the battery cover from the back of the remote control. . Insert two "AA" size batteries, making sure to match the + and – signs on the batteries with the + and – symbols inside the battery compartment. . Reinsert the battery cover on the back of the remote control until the tab snaps. Caution: Never throw batteries into a fire. Note: • Be sure to use "AA" size batteries. • Dispose of batteries in a design
ページ12に含まれる内容の要旨
5 Using the Remote Control Button name Function Remote control functions Turns the TV ON and OFF. . POWER Blinks when the remote control is sending a . LED signal to the TV or is being programmed. . SET Starts all programming sequences. . AUX Puts the remote control in AUXILIARY mode (to operate a programmed device). . CBL Puts the remote control in CABLE mode (to operate a programmed cable TV set- top box) or SATELLITE mode (to operate a programmed satellite TV set-top box). 6. TV
ページ13に含まれる内容の要旨
English Using the Remote Control 5 Button name Function Remote control functions . SLEEP/STOP a. In TV mode, selects the sleep options. In other modes, b. stops a CD player, DVD player, or VCR. a. (AUDIO mode is not available.) . AUDIO/Pause b. Pauses the CD player, DVD player, or VCR when the component is activated with the remote control. . CC/Record a. In TV mode, selects closed caption options. b. In VCR mode, functions as RECORD. . TV/DTV/ a. In TV mode, selects TV or Dig
ページ14に含まれる内容の要旨
5 Using the Remote Control Programming the TV's universal remote control to operate your other devices You can program the TV's remote control to operate up to four different devices—one for each mode button (TV, VCR, CBL, and AUX ). The "TV" mode button on the remote control (see item 6 on page ) is already programmed to operate your TV. (The TV's device program code is 69). To program the remote control to operate another device: . Find the code for the other device in the "Device
ページ15に含まれる内容の要旨
English Using the Remote Control 5 Device program codes CXC 0 80 Magnavox , 00, 000, Device codes for Cable TV 006, 9 , , Daewoo 0 , 0 , 0 80, set-top boxes 000, 0 8, 06 , 9 , 90 , 9 Magnin 90 9 8, 009 , 066 , ABC 000, 00 909, 06, 0 00 Marantz 00, 00 0, 00 Americast 0899 Matsushita 0 0, 060 Dayu 066 Bell South 0
ページ16に含まれる内容の要旨
5 Using the Remote Control Device program codes Waycon 06 LG 00, 00, 00, Device codes for TVs White Westinghouse 0 6, 909, 06 0 09 (continued from previous page) Yamaha 00 0 Logik 00 Yapshe 0 0 LXI 00 Samsung 0, 0 6, 0060, Zenith 00 , 06, 0 8, Magnavox 00, 00 9, 008 08, 00 , 000, 90 , 9 9, 9 , Magnin 0 0
ページ17に含まれる内容の要旨
English Using the Remote Control 5 Device program codes Lasonic 0 98 Jerrold 006, 0080, 006, Device codes for VCRs LG 0 9 , 0869, 080 0000, 000, 000 (continued from previous page) Liquid Video 980 KNC 00008 Lite-On 8, 0 8 LG 00 Systemax 9 Loewe 0 Memorex 00000 Tagar Syst ems 9 Magnavox 0 0 , 0 9, 96, Motorola 006, 0080, 006, Tas
ページ18に含まれる内容の要旨
5 Using the Remote Control Device program codes Mission 0 RadioShack 6 Device code for Satellite MTC 0 0 RCA 0 , 609, , Receivers NSM 0 0, 0 Onkyo 0868, 0 0 Sharper Image 6 (continued from previous page) Optimus 06 , 0000, 00, Silsonic 06 00 , 00, 09, Sony 0 8, , 8, Paysat 00 0, 0 9
ページ19に含まれる内容の要旨
English Power ON / OFF 6 Power ON Operation status TV status "Ready" LED POWER LED . Plug the power cord into a 0V outlet. TV is off Not lit. Solid orange. (no picture). . Press the POWER button on the TV TV is turning on Flashing orange. Solid green. side panel. (no picture). . Power ON successful. Picture on screen. Not lit. Solid green. Power OFF Operation status TV status "Ready" LED POWER LED . Press the POWER button on the TV Lamp cooling. Flashing orange. Solid orange. side pa
ページ20に含まれる内容の要旨
7 Using the TV's features Menu Navigating the menus Sub-menu . Press MENU to open the menu system. 2. Press ▼ to select a menu, and then press ► to enter the menu. 3. Press ▼ to select a sub-menu, and then press ► to enter the sub- menu. 4. a. To adjust a sub-menu with a slider bar, press ►. When done, press ENTER and then press EXIT. b. To adjust the other sub-menus, press ▲▼. When done, press EXIT. Slider bar Programming channels into the TV's channel memory . Press the TV/DTV butto
