ページ1に含まれる内容の要旨
Operating Instructions
LCD Projector
Commercial Use
Model No. PT-LW80NTE
Before operating this product, please read the instructions carefully and save this manual for future use.
TQBJ0261
ENGLISH
ページ2に含まれる内容の要旨
Important Information Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-LW80NTE Serial num
ページ3に含まれる内容の要旨
Important Safety Notice Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/9
ページ4に含まれる内容の要旨
Important Information Important Safety Information Declaration of Conformity Declaration of Conformity (DoC) This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC for this product from our DoC server: http://www.doc.panasonic.de Contact in the EU: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, F.R.
ページ5に含まれる内容の要旨
Important Safety Information ENGLISH - 5 Important Infomation
ページ6に含まれる内容の要旨
Contents Quick steps Important Information Important Safety Notice............................................. 2 1. Set up your projector Declaration of Conformity..................................................4 See “Setting up” on page 17. Precautions with regard to safety............................. 8 WARNINGS ......................................................................8 CAUTIONS........................................................................9 Cautions when transporting
ページ7に含まれる内容の要旨
Contents Settings Appendix Menu Navigation .......................................................29 Technical Information.............................................. 49 Navigating through the MENU ........................................ 29 List of compatible signals ............................................... 49 Main menu and Sub-menu.............................................. 30 Serial terminal................................................................. 50 Computer connection gu
ページ8に含まれる内容の要旨
Important Information Precautions with regard to safety WARNINGS If you notice smoke, strange smells or noise coming Insert the mains plug securely into the mains socket. from the projector, disconnect the mains plug from If the plug is not inserted correctly, electric shocks or the mains socket. overheating could result. Do not continue to use the projector in such cases, Do not use plugs which are damaged or mains otherwise fire or electric shocks could result. sockets which are coming l
ページ9に含まれる内容の要旨
Precautions with regard to safety Do not place your skin into the light beam while the Do not look into the lens while the projector is being projector is being used. used. Strong light is emitted from the projector’s lens. If you Strong light is emitted from the projector’s lens. If you place directly into this light, it can hurt or damage look directly into this light, it can hurt and damage your skin. your eyes. Be especially careful not to let young children look Do not allow the + an
ページ10に含まれる内容の要旨
Important Information Precautions with regard to safety When inserting the batteries, make sure the If not using the projector for an extended period of polarities (+ and -) are correct. time, disconnect the mains plug from the mains If the batteries are inserted incorrectly, they may socket and remove the batteries from the remote explode or leak, and fire, injury or contamination of control. the battery compartment and surrounding area may If dust builds up on the mains plug, the resulti
ページ11に含まれる内容の要旨
Precautions with regard to safety Cautions when installing Avoid setting up in places which are subject to If installing the projector to the ceiling, ask a vibration or shocks. qualified technician to carry out all installation work. The internal parts can be damaged, which may cause You will need to purchase the separate installation kit. malfunctions or accidents. Furthermore, all installation work is should only be carried out by a qualified technician. Avoid setting up in places which
ページ12に含まれる内容の要旨
Important Information Precautions with regard to safety Accessories Make sure the following accessories are provided with your projector. Remote control for PT-LW80NTE AA batteries for Remote control (x2) Power cord secure lock (x1) (x1) TTRA0185 N2QAYB000260 Mains lead (x1) CD-ROM (x1) K2CM3DR00004 TQBH9011 Carrying bag (x1) RGB signal cable (x1) TPEP021 1.8 m (5'10") K1HA15DA0002 * The protectors for enclosed products, such as a plug * Contact to an Authorised Service Centre for lost cover o
ページ13に含まれる内容の要旨
Read this first Minimum required setting screen When you start the projection for the first time or after the projector is initialised, the minimum required setting screen for projection will be displayed. INSTALLATION LANGUAGE Press I H buttons of the remote control or control Select the required language setting. panel on the projector to select the required LANGUAGE installation method. Press G to proceed to the SCREEN FORMAT setting. Setting on a desk/floor and FRONT/DESK projecting fr
ページ14に含まれる内容の要旨
Preparation About Your Projector Projector body Top and front view Zoom-Focus ring cover Cover the zoom and focus rings to protect from dust. Zoom ring (page 24) Focus ring (page 24) Air intake port Indicators POWER LOCK indicator (page 23) POWER indicator (page 23) LAMP indicator (page 44) TEMP indicator (page 44) Amb Ambi ient Lumin ent Lumina ance Senso nce Sensor ( r (ALS ALS)) (p (page age 3 32 2)) Remote control signal receptor (page 25) POWER button RELEASE button Navigation buttons
ページ15に含まれる内容の要旨
About Your Projector Back and bottom view Burglar hook port Attach a commercial burglar prevention cable. Security lock Attach the commercial shackle lock, Lamp unit compartment Remote control signal receptor manufactured by Kensington, to (page 46) (page 25) protect your projector. Compatible with the Kensington MicroSaver Security System. Speaker Air exhaust port Heated air comes out of this opening. Air intake port Font leg adjusters and leg adjuster buttons Air filter compartment (pa
ページ16に含まれる内容の要旨
Preparation About Your Projector Remote control POWER button Detect the input signal and the Switch between stand-by setting of POSITION, DOT mode and projection mode. CLOCK and CLOCK PHASE (page 21/page 22) in POSITION menu will be adjusted automatically for See CD-ROM contents for COMPUTER signals. (page 25) the PAGE buttons INPUT SELECT buttons Switch the required input Display the main menu. signal button to select. See CD-ROM contents the (page 29) WIRELESS button. Navigate thro
ページ17に含まれる内容の要旨
SD Setting up Screen size and throw distance You can adjust the projection size with 1.2x zoom lens. Calculate and define the throw distance as follows. Projected image SW Screen All measurements and the calculation results bellow are approximate and may differ slightly from the actual measurements. Projection size (16 : 10) Throw distance (L) Screen Diagonal Minimum distance Maximum distance Screen height (SH) Screen width (SW) (SD) (LW) (LT) (0.84 m) 33" 0.44 m (1'5") 0.71 m (2'3") 1.1 m (3'
ページ18に含まれる内容の要旨
Getting Started Setting up Projection method You can use the projector with any of the following 4 projection methods. To set the desired method in the projector, See “INSTALLATION” on page 38. Setting on a desk/floor and Setting on a desk/floor and projecting from front projecting from rear INSTALLATION: FRONT/DESK INSTALLATION: REAR/DESK Mounting in the ceiling and Mounting in the ceiling and projecting from front projecting from rear INSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILI
ページ19に含まれる内容の要旨
Connections Before connection to the projector Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off. One RGB cable is provided with the projector. If necessary, prepare commercial connecting cables that match with the projector and each peripheral device terminals. If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective. Confirm the type
ページ20に含まれる内容の要旨
Basic Operation Switching the projector on/off Mains lead Connecting Disconnecting 1. Make sure the shape of the mains plug and the 1. Unplug the mains lead from the mains socket. AC IN terminal on the back of the projector match, 2. Depress the latch and slide the cover off. then push the plug all the way in. Latch 2. Align the side of the power cord secure lock with 3. Slide the power cord secure lock up along the side the side guide rail of the AC IN terminal of the guide rail and remove
