ページ1に含まれる内容の要旨
Operating Instructions
®
DLP Based Projector
Commercial Use
Models No.
PT-D10000U
PT-DW10000U
Read these instructions completely before operating this unit.
TQBJ 0208
ページ2に含まれる内容の要旨
Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help ® you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D10000U/PT-DW10000U Serial number: 2 – ENGLISH
ページ3に含まれる内容の要旨
Be sure to read the “IMPORTANT SAFETY NOTICE” and Contents the “Precautions with regard to safety”. (pp. 4-9) IMPORTANT SAFETY NOTICE ............................................................................................. 4 Precautions with regard to safety ........................................................................................ 6 Before Using ........................................................................................................................ 10 Locatio
ページ4に含まれる内容の要旨
IMPORTANT SAFETY NOTICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the Product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the pres
ページ5に含まれる内容の要旨
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
ページ6に含まれる内容の要旨
Precautions with regard to safety WARNING ■ If a problem occurs (such as no image) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. • Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. • Check that no more smoke is coming out, and then contact an Authorized Service Center for repairs. • Do not attempt to repair the projector yourself, as this can be danger
ページ7に含まれる内容の要旨
■ Insert the power cord plug securely into the wall outlet. • If the plug is not inserted correctly, electric shocks or overheating could result. • Do not use plugs which are damaged or wall outlets which are coming loose from the wall. ■ Do not place the projector on top of surfaces which are unstable. • If the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, and injury or damage could result. ■ Do not place the projector into water or let it
ページ8に含まれる内容の要旨
Precautions with regard to safety (continued) CAUTION ■ Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam. • Using the projector under such conditions may result in fire or electric shocks. ■ When disconnecting the power cord, hold the plug, not the cord. • If the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks may result. ■ Always disconnect all cables b
ページ9に含まれる内容の要旨
■ Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning. • Electric shocks can result if this is not done. ■ If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces. • Failure to observe this may cause the user to absorb the gas which was released when the lamp broke and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces may cause injury.
ページ10に含まれる内容の要旨
Before Using Accessories Check that all of the accessories shown below have been included with your projector. Drop-prevention bracket Remote Control Batteries for Remote Power cord Eye bolt Wire [N2QAYB000076 × 1] Control (AA) [K2CG3YY00015 × 1] [THEA172J × 4] [TTRA0144 × 4] Caution when moving the projector The projection lens is susceptible to vibrations and impacts. Be sure to always remove the lens during transport. Cautions regarding setup Be sure to observe the following precautions when
ページ11に含まれる内容の要旨
Notes on use ■ To view clear images: ● The audience cannot enjoy high-contrast and clear images if outside light or the illumination interferes the screen surface. Draw window curtains or blinds, turn off the lightings near the screen or take other proper measures. ● In rare cases, wafture can occur on the screen affected by the warm air from the exhaust port depending on the environment. Make sure that there is no equipment in front of the set which will recirculate the exhaust air from the
ページ12に含まれる内容の要旨
Location and function of each part Remote control unit ■ Front # $ % 0 & ( 1 ) 2 * 3 + 4 - 5 . / 6 7 # Remote control operation indicator lamp * ON SCREEN button .................................... (p. 43) The lamp flashes when any remote control button This button turns on and off the on-screen is pressed. indication function. $ POWER STANDBY button ................. (pp. 34, 36) + TEST PATTERN button .............................. (p. 44) When the projector is in projection mode with the Thi
ページ13に含まれる内容の要旨
■ Side ■ Top 9 8 ■ Bottom : 1 SHUTTER button ........................................ (p. 43) 8 LOCK button Press this button to black out the image This button is used to prevent unintentional temporarily. operation of the projector by accidentally pressing a button, and to prevent the remote control 2 ASPECT button ........................................... (p. 45) batteries from becoming spent. Switches the image aspect ratio. 9 Remote control transmitter window 3 LENS (FOCUS, ZOOM, SHIFT
ページ14に含まれる内容の要旨
Location and function of each part (continued) Projector Main Unit ■ Front ■ Rear #$%&() * 2 *+-. / 0136 45 # Projectin lens cover ................................... (p. 33) . Projection lens cover lock button ............. (p. 33) This button toggles between lock and unlock of the $ Projection lens (optional) detachable cover for the projection lens (optional). Lens for projecting images on the screen. / Air filter ...................................................... (p. 108) % Remote contr
ページ15に含まれる内容の要旨
■ Side ■ Controls Connection &( ) * + - terminals (p. 16) Controls #$% ./0 1 2 # AC IN terminal ............................................. (p. 34) + LENS button ................................................ (p. 37) Connect the supplied line power cord into this Switches to the adjustment mode for lens focus, receptacle. zoom and shift (position). Do not connect any other cable to this socket. - ENTER button ............................................. (p. 48) $ MAIN POWER switch .......
ページ16に含まれる内容の要旨
Location and function of each part (continued) ■ Connection terminals #$ % & ( ) *+ - . / 0 # REMOTE1 lN/OUT terminal ........................(p. 18) ) LAN terminal (10BASE-T/100BASE-TX) When two or more main units are used in the ...................................................... (pp. 25, 26, 85) system, they can be connected and controlled with This terminal is used for connecting a LAN cable. a wired remote control cable (M3 jack). * VIDEO IN terminal ....................................
ページ17に含まれる内容の要旨
Using the remote control unit Effective range of remote Loading batteries When loading supplied AA batteries into the battery control operation compartment of the Remote Control, make sure that The Remote Control should normally be aimed at their polarities are correct. either the front or rear remote control receiver window on the projector (figure 1). 1. Open battery compartment lid. The effective control range is approx. 30 metres from • Open the lid in the order # and then $. the beam
ページ18に含まれる内容の要旨
Using the remote control unit (continued) Note Using a wired remote • The Remote Control may not function properly if an control object is in the light path. • The Remote Control receiver may not function When multiple main units are connected as part of properly in intense ambient light such as fluorescent the system, connect to units with a M3 stereo mini lamps. Carefully site the projector so its Remote jack cable (sold separately) to simultaneously control Control receiver windows w
ページ19に含まれる内容の要旨
Installation Examples of system expansion The projector is provided with a number of terminals and optional accessories to enable various system expansions. Both input and output are provided to all terminals on the main unit. The following are some examples of system expansion: System 1 The optional high- or low-ceiling mount bracket flexibly fits the projector in individual site conditions. System 2 Connection to a computer via the DVI-D IN terminal or DVI-D input module (optional). ENGLISH
ページ20に含まれる内容の要旨
Installation (continued) Adjusting the feet The four adjustable feet mounted at the bottom of the projector are level-adjustable (0 mm–15 mm) which can be used when the floor surface is not horizontal. (Front) (Front) (Rear) (Rear) Projection scheme This projector can use any of the four projection schemes. Select the most suitable scheme to the situation of your location. Use the OPTION menu on the menu screen to choose the desired projection scheme. (p. 76) Floor Floor Ceiling Ceiling Fron
