ページ1に含まれる内容の要旨
3D Starter Pack
MODEL
3DC-100S
OWNER’S GUIDE
For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at TVSupport@mevsa.com.
- Call Consumer Relations at 800-332-2119 for operational or
connection assistance.
To order replacement or additional remote controls or other
accessories, visit our website at www.mitsuparts.com or call
800-553-7278.
ページ2に含まれる内容の要旨
2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel. Servicing is require
ページ3に含まれる内容の要旨
3 Features • Converts 3D video originating in several popular formats to checker- board format for display on your 3D or 3D-ready Mitsubishi television or 3D-ready Samsung DLP television. • Processes side-by-side, top-and-bottom, and frame-packing 3D (e.g., Blu-ray 3D) formats. • Passes 2D images unaltered for normal display. • Includes two pairs of active-shutter 3D glasses and matching IR emitter. • Compatible with these Mitsubishi television models: 3D-Ready 833 series (2007) L65-A
ページ4に含まれる内容の要旨
4 Samsung 3D Ready DLP TVs Compatibility with 3DC-100S Adapter Mitsubishi has tested the 3DC-100S with representative models from several series of Samsung 3D-Ready DLP HDTVs. Mitsubishi has not tested all Samsung 3D-Ready DLP HDTV models or series and cannot guarantee compatibility with non-tested models or series. Samsung 3D-Ready Plasma TVs are not compatible with the 3DC-100S. 650 Series 87 Series Tested Model: HL61A650C1F Tested Model: HL-T5687S Other Models: HL50A650C1F Other Model
ページ5に含まれる内容の要旨
POWER 3D STATUS POWER 3D MODE 5 3D Adapter Battery Installation The remote control requires one CR2025 lithium battery. To remove the battery, 1 press on the retaining clip. 2 Emitter 1. Remove the cover. 2. Insert the battery, positive side up. Be sure the retaining clip holds the battery securely. 3. Reinstall the cover. Lithium Battery Safety This product uses CR2025 Li/MnO2 lithium coin batteries. WARNING: Lithium coin cell batteries pose a serious risk of injury if ingested. Keep
ページ6に含まれる内容の要旨
HDMI OUT 3D GLASSES 5V DC 2A 3D GLASSES HDMI IN EMITTER OUT EMITTER IN 5V DC 2A 3D GLASSES HDMI OUT 3D GLASSES 5V DC 2A HDMI IN EMITTER OUT EMITTER IN 3D GLASSES EMITTER IN 3D GLASSES 5V DC 2A 3D GLASSES HDMI IN HDMI OUT EMITTER IN EMITTER OUT 3D GLASSES 5V DC 2A 3D GLASSES HDMI OUT HDMI IN EMITTER OUT EMITTER IN HDMI OUT 3D GLASSES 5V DC 2A 3D GLASSES HDMI IN HDMI OUT EMITTER OUT EMITTER IN HDMI IN 6 Connecting the Adapter Connecting a Single 3D Video Source • Power off all devices prior
ページ7に含まれる内容の要旨
7 Connecting the Adapter, continued Connecting Multiple 3D Video Sources • Connect devices with checkerboard output directly to the TV. Enable checkerboard output from the devices if needed. • If using a newer A/V receiver, you may be able to connect devices to the A/V receiver as shown below. The A/V receiver must support HDMI 1.4 and 3D video capabilities. HDMI HDMI cables cables A/V Source TV receiver Adapter devices Notice Concerning Samsung 720p TVs The adapter is not fully co
ページ8に含まれる内容の要旨
8 Using the Adapter 1. Position the emitter where there will be a clear path to the 3D glasses. 2. Power on the TV, the 3D video device, and the 3D glasses. Note: The 3D video device must be powered on before the 3D Adapter can power on. 3. If the 3D Adapter does not power on automatically when you power on the 3D video device, press the POWER button. 4. Mitsubishi TV only. If the New Input Found screen displays, assign a name to the input. If you have an 833 series TV, name the input
ページ9に含まれる内容の要旨
9 3D Glasses 3D active LCD shutter glasses enable you to view 3D images when used with the matching IR emitter and a compatible 3D-ready TV. Battery Power Button Cover LCD Shutter Lens LED Indicator Emitter LED Lit when TV is in 3D mode. Battery Installation • Each pair of glasses requires one CR2025 lithium battery. • A continuously blinking red LED indicates low battery power. Install a new battery. • See lithium-battery safety information at the front of this booklet. Open the cove
ページ10に含まれる内容の要旨
10 Using the 3D Glasses 3D Glasses Operation 1. Turn on 3D Mode in the TV and 3D source device. 2. Press the POWER button on the glasses to turn on the glasses. 3. When the 3D program is complete, turn off 3D mode in the TV and 3D source device and turn off the glasses. On Operating Range Be from 5 to 20 feet away. Press POWER button. The red 5 ft. LED will light for three seconds. 20 ft. 50° 50° Off Hold POWER button for about two seconds. Red LED will blink three times. Notes On the 3D
ページ11に含まれる内容の要旨
11 Cleaning Instructions • To avoid scratching the glasses, use only standard glasses lens cleaning cloth, microfiber cloth, or a soft non-scratching cloth such as cotton flannel. Make sure the cloth is clean and free of any foreign material that may scratch the glasses. • Cloths pre-moistened with cleaning solutions designed specifi- cally for eye glasses can be used, however, do not spray solutions directly on the glasses. • DO NOT spray any cleaner directly onto the any surface of
ページ12に含まれる内容の要旨
12 3D Safety Requirements • 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. • Do not wear the wireless glasses in any situations that require unimpaired visual perception. • Children under the age of 5 should not view 3D programming. Under normal conditions, 3D viewing is safe for your movies or games. Some people may experience discomfort, however. To minimize the potential for experie
ページ13に含まれる内容の要旨
13 Mitsubishi Model 3DC-100S 3D Starter Kit Limited Warranty MITSUBISHI ELECTRIC VISUAL SOLUTIONS AMERICA, INC. (“MEVSA”) war- rants as follows to the original purchaser of this 3D Starter Kit from an autho- rized MITSUBISHI Audio/Video Dealer, should the adapter, glasses, IR emitter, remote control or included accessories prove defective by reasons arising from improper workmanship and/or material: a. Length of Warranty. The Starter Kit including the 3D adapter, 3D glasses and IR emitter
ページ14に含まれる内容の要旨
14 rized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner’s Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MEVSA, s
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
3DC-100S © 2011 Mitsubishi Electric Visual Solutions America, Inc. 853B710B80
