ページ1に含まれる内容の要旨
DLP™ PROJECTOR
MODEL
XD700U
WD720U
User Manual
XD700U
WD720U
This User Manual is important to you.
Please read it before using your projector.
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an e
ページ3に含まれる内容の要旨
Contents Important safeguards ........................................................................................................................4 Overview ............................................................................................................................................6 Remote control ..................................................................................................................................8 Installation ....................................
ページ4に含まれる内容の要旨
Important safeguards Please read all these instructions regarding your 10. Power sour ces projector and retain them for future reference. Follow This projector should be operated only from the all warnings and instructions marked on the projector. type of power source indicated on the marking label. If you are not sure of the type of power, 1. Read instructions please consult your appliance dealer or local All the safety and operating instructions should be power company. read before the
ページ5に含まれる内容の要旨
Important safeguards (continued) Do not use the projector with condensation on it. WARNING: It can lead to breakdown or other failure. Unplug immediately if there is something wrong Place of installation with your projector. For safety’s sake, do not use the projector at any place Do not operate if smoke, strange noise or odor comes subjected to high temperature and high humidity. out of your projector. It may cause fire or electric Please maintain an operating temperature, humidity, sho
ページ6に含まれる内容の要旨
Overview 1 Lamp cover 2 Lens 3 FOCUS ring 1 23 4 4 ZOOM ring 5 LENS SHIFT dial 6 Remote control sensor (front) 7 Speaker 5 8 Lock bar 9 Intake vent 10 Control panel 11 Exhaust vent 12 Power jack 13 Terminal panel 14 Kensington Lock 6789 Caution: 10 11 • Do not r eplace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. 12 13 14 Control panel 1 AUTO POSITION/ button 2 EFFICIENT MODE button 1 2 3 4 3 STATUS indicator 4 POWER indicato
ページ7に含まれる内容の要旨
Overview (continued) Bottom side 1 Adjustment feet 1 Remote control 1 ON button ON STANDBY 2 MAGNIFY button 1 12 3 VOLUME UP, DOWN buttons MAGNIFY ASPECT 4 KEYSTONE button 13 2 5 MENU button 14 UP EFFICIENT 6 ENTER button MODE VOL 3 KEYSTONE DOWN 3D 7 AV (Audio/Video) MUTE button 15 4 8 VIEWER button AUTO POSITION 9 UNPLUG button MENU 5 16 10 USB DISP. button 6 11 LAN DISP. button ENTER 17 12 STANDBY button AV MUTE FREEZE 13 ASPECT button 7 18 14 EFFICIENT MODE button VIEWER VIDEO 8 1 19 COMPUTE
ページ8に含まれる内容の要旨
Remote control Battery installation Use two (AA, R6) size batteries. Inserting the batteries into the remote control 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sur e that they ar e positioned corr ectly (+ to +, and - to -). • Load the batteries fr om - spring side, and make sur e to set them tightly . 3. Replace the back cover. Removing the batteries from the remote control Remove the back
ページ9に含まれる内容の要旨
Installation Screen size and projection distance Refer to the following tables to determine the screen size and projection distance. • The figur es in the tables ar e appr oximate and may be slightly dif fer ent fr om the actual measur ements. • The lens shift height shows distances fr om the factory default position. Screen Screen width (SW) Down side Up side L For XD700U: Screen size (4:3) Projection distance (L) Lens shift height Hd Diagonal size Width (SW) Height (SH) Shortest (Wide) Longe
ページ10に含まれる内容の要旨
Installation (continued) Screen size and projection distance (continued) Screen Screen width (SW) Down side Up side L SW (=W) For WD720U: (continued) Screen (4:3) When the aspect ratio of the screen is 4:3 When the aspect ratio of the screen is 4:3, the positional relation between Image (16:10 / 16:9) the projected image and the screen is as shown on the right. Refer to the following table for installation. • When the aspect ratio of the image is 16:10 (WXGA) Screen size (4:3) Size of the pr
ページ11に含まれる内容の要旨
Installation (continued) kit. (Don’t use screw holes without arrow marks.) In Front projection, ceiling mounting this case, make sure that the screw is inserted in For ceiling mounting, you need the ceiling mount the projector at least 5 mm. The length of the screw kit designed for this projector. Ask a specialist for should be 20 mm or shorter . Also make sur e that installation. For details, consult your dealer. no electrical current is flowing in the mount kit due • The warranty on th
ページ12に含まれる内容の要旨
Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sur e that the connected device is tur ned of f befor e starting connection. • Plug in the power cor ds of the pr ojector and the connected devices firmly . When unplugging, hold and pull the plug. Do not pull the cord. • When the pr ojector and the connected devices ar e located too close to ea
ページ13に含まれる内容の要旨
Basic connections (continued) Connection (for video equipment having an HDMI terminal) Equipment having an HDMI terminal To HDMI terminal HDMI HDMI (with HDMI logo) cable (option) Important: • Use a commer cially available HDMI (with HDMI logo) cable. • Y ou don’ t have to connect any cable for audio input. Y ou can input video and audio using an HDMI cable only . • When HDMI audio isn’ t output, it may be output by tur ning of f the power of the video equipment with the pr ojector and the
ページ14に含まれる内容の要旨
Basic connections (continued) Projector + Computer For computer with mini D-SUB Computer cable COMPUTER/ COMPONENT VIDEO IN Computer Necessary when outputting to both a PC monitor and the projector. Computer cable (option) To monitor port MONITOR OUT AUDIO AUDIO IN-1 OUT or IN-2 Audio cable (option) PC audio cable (option) To PC audio output For analog connection: 1. Connect one end of the supplied computer cable to the COMPUTER/COMPONENT VIDEO IN terminal (1, 2) of the projector. 2. Connect
ページ15に含まれる内容の要旨
Preparation Important: Preparation for projection • When Standby Mode of the Ef ficient Mode menu 1. Attach the provided power cord to the projector. in the Installation menu is set to LAN, Speaker Out, 2. Plug the power cord in the wall outlet. or Monitor Out, the fans rotate at very low speed 3. Remove the lens cap. during standby after plugging the power cord (with Warning: 5 second high speed rotation at the beginning) • Do not look into the lens dir ectly when the pr ojector and aft
ページ16に含まれる内容の要旨
Preparation (continued) • Y ou can corr ect the vertical keystones. However , Adjustment of the projection angle their adjustment ranges are limited in such For the best projection, project images on a flat screen correction. installed at 90 degr ees to the floor . If necessary , tilt the projector using the two adjustment feet on the bottom Important: of the projector. • When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value Using the adjus
ページ17に含まれる内容の要旨
Basic operation ON STANDBY 4 1, 2 3 MAGNIFY ASPECT 6 UP EFFICIENT MODE VOL KEYSTONE DOWN 3D AUTO MENU POSITION ENTER AV MUTE FREEZE VIEWER VIDEO 1 COMPUTER UNPLUG S-VIDEO 5 2 USB DISP. HDMI LAN DISP. DVI 5 3, 1, 2 • The pr ojector starts warming up when the POWER Power-on button is pressed. During the warm-up process, 1. Turn on the device connected to the projector first. images may appear dark and no commands are 2. Plug the power cord in the wall outlet. accepted. • The POWER indicato
ページ18に含まれる内容の要旨
Basic operation (continued) 6. Adjust the image size by turning the zoom ring. Direct Power OFF 7. Adjust the vertical position of the displayed image You can turn off this projector just by unplugging the by turning the LENS SHIFT dial. power cord without pressing the POWER button. • Don’ t shut down the pr ojector while the ST A TUS • If necessary , adjust the focus and zoom again. indicator is blinking after the lamp lights up because the lamp’s life may be shortened. When fine streaks
ページ19に含まれる内容の要旨
Basic operation (continued) Setting the aspect ratio Watching 3D content You can change the aspect ratio of the input video You can enjoy 3D content with this projector. signal (or the ratio of width to height of the image). In order to watch 3D content, you need to have the Change the setting according to the type of the input following items: video signal. • Field-sequential 3D video contents • DLP™ Link™ active 3D glasses With the remote control: (Field-sequential: The system which display
ページ20に含まれる内容の要旨
Basic operation (continued) • The MAGNIFY mode cannot be used when viewing • When viewing the pictur es that r oll over and 3D contents on the projector. shake or many dynamic pictures, if you feel • It may occur that the image may not be enough 3D uncomfortable, please look at another place. image because setting such as fluorescent lighting • When viewing contents with movements such as may occur loss of synchronism of glasses. rotation, or horizontal or vertical oscillation, you •
