Epson POWERLITE 1810Pの取扱説明書

ページ1に含まれる内容の要旨

E
R
®
PowerLite 1810p
Quick Setup
Connect the projector
to your notebook
Lo cate the required cables:
1


Power cord VGA computer cable

Connect the computer cable to the blue
2
Computer1 port on the projector.




Before using the projector, make sure you read the safety
instructions in the User´s Guide on your projector CD.
Connect the other end to your notebook’s
3
video-out or monitor port.
Follow these instructions to connect the proj

ページ2に含まれる内容の要旨

Quick Setup PowerLite 1810p Using the remote control Troubleshooting If this is your first time using the remote, make sure its batteries 1 are installed as shown (two AAA batteries). If you see a blank screen... If you see a blank screen or the No signal message after turning on your notebook, check the following:  Make sure the Power light on the projector is green and not flashing, and the A/V Mute slide (lens cover) is open. 