ページ1に含まれる内容の要旨
®
OkiLAN 6120e User’s Guide
High Performance 10/100 Base-T Ethernet
Network Print Server
ページ2に含まれる内容の要旨
Copyright and Trademark Information Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in products made by other manufacturers and referred to in this handbook will not affect the applicability of the information in it. This handbook is subject to change without notification. © 2001 by Oki Data. All rights rese
ページ3に含まれる内容の要旨
Organization and Contents Organization This manual has been divided into eight sections. Section I contains and installation instructions for the OkiLAN 6120e print server. Section II contains information about management features, an extremely valuable set of OkiLAN 6120e management tools for network administrators. The Network Operating System (NOS) and protocol sections are found in Sections III through VI. Section VI contains information and instruction on Windows printing options. With the
ページ4に含まれる内容の要旨
Organization and Contents Section IV: TCP/IP .................................................. IV-1 Chapter 1: Introduction ................................................ IV-5 Chapter 2: Configuring the OkiLAN 6120e ................ IV-7 Chapter 3: TCP/IP Configuration and Printing .......... IV-14 Chapter 4: OkiNet for TCP/IP ................................... IV-23 Chapter 5: Web Configuration ................................... IV-42 Chapter 6: Telnet Configuration .......................
ページ5に含まれる内容の要旨
Network Operating Systems Network Operating Systems Overview OkiLAN 6120e simultaneously supports several network protocols in various combinations. Below is a list of supported network protocols accompanied with NOS/OS requirements. TCP/IP and Windows NT TCP/IP, FTP and Remote LPD protocols. Simple Network Management Protocol (SNMP) and Windows NT are supported in this environment. HTTP and a built-in Web server are standard for the 6120e. Novell NetWare Novell NetWare versions 3.x, 4.1, 5.x an
ページ6に含まれる内容の要旨
Technical Support Service Information Note: This information is valid for the United States and Canada only. Oki Data On Line Visit the OKI DATA Web Site at http://www.okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate information • Dealers • Documentation Your Dealer Consult the store where you purchased your OkiLAN 6120e, or call 1-800-OKI-DATA (1-800-654-3282) for the location of the nearest authorized Oki Data service dealer. Have yo
ページ7に含まれる内容の要旨
Technical Support Oki Data Customer Support Representatives Agents are available 24 hours a day, 7 days a week at 1-800-OKI-DATA (1-800-654-3282). Please be sure that you are calling from a telephone close to your printer, so you can describe your problem accurately. Our customer service representatives are trained on all current Oki Data products They can answer your questions regarding: • Installation • Determination of printer issues that require service • Consumer relations • Interface infor
ページ8に含まれる内容の要旨
Technical Support UNITED STATES Oki Data Americas, Inc. 2020 Bishops Gate Blvd. Mt. Laurel, NJ 08054 Tel: 1-800-654-3282 Fax: 1-856-222-5247 CANADA Oki Data Americas, Inc. 2735 Matheson Blvd. East, Unit 1 Mississauga, Ontario, Canada L4W 4M8 Tel: 1-800-654-3282 Fax: 1-905-238-4427 MEXICO Oki Data de Mexico, S.A. de C.V. Mariano Escobedo No. 748 - 8 Piso Col Anzures, e. p. 11590 Mexico, DF Tel: (525) 263-8780 Fax: (525) 263-8785 BRAZIL Oki Data do Brasil, Ltda. Rua Alexandre Dumas, 2220 - 8 andar
ページ9に含まれる内容の要旨
Technical Support When you call Technical Support, the following information will help us answer your questions more quickly and accurately. Please be able to identify the following: • OkiLAN model number • Serial number • Configuration sheet settings • Type of network cable connected to the OkiLAN 6120e • Printer(s) make and model numbers • Computer and network adapter card make and model numbers • Network Operating System and version number Please write these numbers down in the space provided
ページ10に含まれる内容の要旨
Technical Support x OKI OkiLAN 6120e User’s Guide
ページ11に含まれる内容の要旨
Section I: Hardware Installation Hardware Installation
ページ12に含まれる内容の要旨
Section I - Hardware Installation I - 2 OKI OkiLAN 6120e User’s Guide
ページ13に含まれる内容の要旨
Section I - Hardware Installation Contents Powering On the OkiLAN 6120e .............................I-7 Printing a Configuration Sheet ...............................I-8 OKI OkiLAN 6120e User’s Guide I - 3 Hardware Installation
ページ14に含まれる内容の要旨
Section I - Hardware Installation I - 4 OKI OkiLAN 6120e User’s Guide
ページ15に含まれる内容の要旨
Section I - Hardware Installation The OkiLAN 6120e Print Server enables Ethernet network users to connect to a printer with an OKI SIDM port. The OkiLAN 6120e supports 10/100-megabit networks and most popular network operating systems and SIDM printers. Removing the OkiLAN 6120e Before using the parallel port, you must remove the OkiLAN 6120e from the printer. 1. Turn off printer power. 2. Unplug the power cord. 3. Unplug the 10/100Base-T UTP cable from the receptor on the back of the OkiLAN 612
ページ16に含まれる内容の要旨
Section I - Hardware Installation 4. Unplug the power adapter from the wall outlet. Then unplug the power adapter wire from the power jack on the OkiLAN 6120e. 5. Slide the OkiLAN 6120e out of the printer and store it in a safe place for future network requirements. 6. Attach the interface cable to the parallel interface connector. Attach the other end of the cable to your computer. 7. Plug the power cord into the power outlet. I - 6 OKI OkiLAN 6120e User’s Guide
ページ17に含まれる内容の要旨
Section I - Hardware Installation Re-installing the OkiLAN 6120e To use your printer on a network, you must re-install the OkiLAN 6120e. 1. Turn off printer power. 2. Unplug the power cord. 3. Detach the interface cable from the rear of the printer. 4. Insert the OkiLAN 6120e by sliding it along the rails in the recess of the printer, until it is plugged into the socket in the rear of the recess. OKI OkiLAN 6120e User’s Guide I - 7 Hardware Installation
ページ18に含まれる内容の要旨
Section I - Hardware Installation 5. Plug the power adapter wire into the power jack on the OkiLAN 6120e. Then plug the power adapter into a 120 VAC wall outlet. Please note that some countries may require a different adapter for local voltages, such as 240 VAC. 6. Attach the 10/100Base-T UTP cable to the recep- tacle on the back of the OkiLAN 6120e. Attach the other end of the cable to the Network. 7. Plug the power cord into the power outlet. I - 8 OKI OkiLAN 6120e User’s Guide
ページ19に含まれる内容の要旨
Section I - Hardware Installation Powering On the OkiLAN 6120e Turn printer power on. The red and green indicators on the OkiLAN 6120e will blink during self-test. When self-test completes successfully, the red indicator will go off and the green indicator will stay on. Green indicator Red indicator OKI OkiLAN 6120e User’s Guide I - 9 Hardware Installation
ページ20に含まれる内容の要旨
Section I - Hardware Installation Note: If the red and green indicators do not display as indicated above, see Hardware Troubleshooting at the end of this section. Printing a Configuration Sheet To print configuration information, press the Test button on the front of the OkiLAN 6120e. You can also print configuration information using the utility program provided on the CD. Note: By default, the configuration sheet prints in ASCII text. The content of the configuration sheet will vary depend- i
