ページ1に含まれる内容の要旨
SOFTWARE
USER’S GUIDE
For DCP users; This documentation is for
both MFC and DCP models. Where it
says 'MFC' in this user's guide, please
read 'MFC' as 'DCP'.
Not all models are available in all
countries.
Version B
USA
ページ2に含まれる内容の要旨
Applicable models This User’s Guide applies to the following models. MFC-J280W/J425W/J430W/J435W/J625DW/J825DW/J835DW/J5910DW Definitions of notes We use the following icons throughout this User’s Guide: CAUTION indicates a potentially hazardous situation which, if not avoided, CAUTION may result in minor or moderate injuries. IMPORTANT indicates a potentially hazardous situation which, if not IMPORTANT avoided, may result in damage to property or loss of product functionality. Notes tell you
ページ3に含まれる内容の要旨
Table of Contents ® Section I Windows 1Printing 2 Using the Brother printer driver..................................................................................................................2 Features ....................................................................................................................................................2 Choosing the right type of paper...............................................................................................................
ページ4に含まれる内容の要旨
2Scanning 39 Scanning a document using the TWAIN driver........................................................................................39 Scanning a document into the computer...........................................................................................39 Pre-Scanning to crop a portion you want to scan..............................................................................41 Auto Crop .....................................................................................
ページ5に含まれる内容の要旨
Device Settings tab..................................................................................................................................73 Configuring Remote Setup (For MFC-J625DW/J825DW/J835DW/J5910DW) .................................73 Accessing Quick Dial (For MFC-J625DW/J825DW/J835DW/J5910DW)..........................................73 Configuring the Scan button settings.................................................................................................74 Launchin
ページ6に含まれる内容の要旨
5 Brother PC-FAX Software (MFC models only) 96 PC-FAX sending......................................................................................................................................96 Setting up user information................................................................................................................96 Sending setup....................................................................................................................................97 Setting up a
ページ7に含まれる内容の要旨
Section II Apple Macintosh 8 Printing and Faxing 127 Setting up your computer.......................................................................................................................127 Choosing the right type of paper............................................................................................................127 Simultaneous printing, scanning and faxing....................................................................................127 Clearing data from the mem
ページ8に含まれる内容の要旨
CUSTOM SCAN ....................................................................................................................................173 File types .........................................................................................................................................174 Document Size ................................................................................................................................174 User-defined button...................................
ページ9に含まれる内容の要旨
Using Web Services for scanning on your network ® ® (Windows Vista SP2 or later and Windows 7)................................................................................221 Using Web Services for scanning on your network from a computer ® ® (Windows Vista SP2 or later and Windows 7).........................................................................221 Using Web Services for scanning on your network from the Brother machine ® ® (Windows Vista SP2 or later and Windows 7).............
ページ10に含まれる内容の要旨
Section I ® Windows I Printing 2 Scanning 39 ControlCenter4 60 Remote Setup (For MFC-J625DW/J825DW/J835DW/J5910DW) 94 Brother PC-FAX Software (MFC models only) 96 PhotoCapture Center™ (For MFC-J625DW/J825DW/J835DW/J5910DW) 115 Firewall settings (For Network users) 117
ページ11に含まれる内容の要旨
Printing 1 1 1 Note ® • The screens in this section are from Windows XP. Screens on your computer may vary depending on your operating system. • If your computer is protected by a firewall, and you are unable to network print, network scan or PC-Fax, ® you may need to configure the firewall settings. If you are using the Windows Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. If you did not install from the CD-ROM, see Firewal
ページ12に含まれる内容の要旨
Printing Choosing the right type of paper 1 1 For high quality printing, it is important to choose the right type of paper. Be sure to read Loading paper and Loading documents in the Basic User’s Guide before buying paper, and to determine the printable area depending on the settings in the printer driver. Simultaneous printing, scanning and faxing 1 Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a document into the computer. Fax sendi
ページ13に含まれる内容の要旨
Printing Status Monitor 1 1 The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of error messages such as paper empty, paper jam or ink replacement required. You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing Status Monitor located in Start/All Programs/Brother/MFC-XXXX on your computer. There is also a link to the Genuine Brother Supplies w
ページ14に含まれる内容の要旨
Printing Turning off the Status Monitor 1 1 If you want to switch off the Status Monitor, follow these steps: a Right-click the Brother Status Monitor icon or window and click Load Status Monitor on Startup to clear the check mark. b Right-click again then click Exit. Note Even if the Status Monitor is off, you can check the machine’s status at any time by clicking Status Monitor from the Start menu on your computer. 5
ページ15に含まれる内容の要旨
Printing Printer driver settings 1 1 You can change the following printer settings when you print from your computer: Media Type Print Quality Paper Size Orientation Color / Grayscale Ink Save Mode Scaling Accessing the printer driver settings 1 ® a From an application such as Microsoft Notepad, click File, then Print in your application. b Choose Brother MFC-XXXX Printer (where XXXX is your model name) and click Preferences. The printer driver window appears. 6
ページ16に含まれる内容の要旨
Printing Basic tab 1 1 1 1 2 2 3 3 4 4 5 5 6 6 18 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 17 1 Media Type drop-down list 2 Slow Drying Paper check box 3 Print Quality drop-down list 4 Paper Size drop-down list 5 Borderless check box 6 Color Mode option 7 Orientation option 8 Copies option 9 Collate check box 10 Reverse Order check box 11 Multiple Page drop-down list 12 Page Order drop-down list 13 Border Line drop-down list 14 Duplex / Booklet drop-down list 15 Duplex Settings butt
ページ17に含まれる内容の要旨
Printing a Choose your settings for Media Type, Slow Drying Paper and Print Quality. 1 Note Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may cause some slight blurring of text. b Choose Paper Size, Borderless, Color Mode, Orientation, number of Copies and the page order, Collate, Reverse Order, Multiple Page, Page Order, Border Line and Duplex / Booklet (if required). c Click OK to apply your chosen settings. To return to the default settin
ページ18に含まれる内容の要旨
Printing Print Quality 1 1 The Print Quality selection lets you choose the print resolution. As print quality and speed are related, the higher the quality, the longer it will take to print the document. The quality selections that are available will vary depending on the media type you choose. Best Use for printing precise images such as photographs. This is the best resolution and slowest speed. Photo Use for printing photographs. Since the print data is much larger than a normal docume
ページ19に含まれる内容の要旨
Printing Paper Size 1 1 The Paper Size drop-down list includes a large selection of standard paper sizes. If you want, you can create a custom size ranging from 3.5 5in. (88.9 127.0 mm) to 8.5 14 in. (215.9 355.6 mm) (for MFC-J5910DW, 11.3 17 in. (287 431.8 mm)). From the drop-down list, choose the Paper Size you are using. You can create a custom size by choosing User Defined. Specify the Width and Height values, and enter any name you want for this custom size. Choose the co
ページ20に含まれる内容の要旨
Printing Orientation 1 1 Orientation chooses the position that your document will be printed (in Portrait or Landscape). Portrait (Vertical) Landscape (Horizontal) Note If your application software contains a similar function to this, we recommend you use the one in the application. Copies 1 The Copies selection sets the number of copies that will be printed (1 to 999). Collate 1 With Collate checked, one complete copy of your document will be printed and then reprinted according to th
