ページ1に含まれる内容の要旨
XPrint UNIX System Printer Driver
Installation
SOLARIS 1.X (SUN OS) / SOLARIS 2.X
XPrint Color Series
701P91273
May 1996
ページ2に含まれる内容の要旨
Xerox Corporation Multinational Customer and Service Education 780 Salt Road Webster, New York 14580 © 1995 by Xerox Corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. Printed
ページ3に含まれる内容の要旨
Table of Contents 1 How to read this Manual _________________________________ 1-1 FTP sites where this document is available ________________________________ _________1-1 2 Quick Setup SOLARIS 1.X , 2.X ___________________________ 2-1 Overview: ________________________________ ________________________________ ___2-1 Setup:________________________________ ________________________________ ______2-1 3 Quick Setup NON SOLARIS UNIX__________________________ 3-1 Overview: _____________________________
ページ4に含まれる内容の要旨
Overview: ________________________________ ________________________________ __12-3 Setup:________________________________ ________________________________ _____12-3 13 Administration _______________________________________ 13-4 Overview: ________________________________ ________________________________ __13-4 4915/4920/4925 Printer Parameters Configurable via Telnet __________________________ 13-5 Protocol Settings________________________________ ______________________ 13-5 NIC Settings ________
ページ5に含まれる内容の要旨
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION v
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1 How to read this Manual You will see throughout this manual the reference to 49XX. 49XX is generic. When you see this, substitute the actual model name of your XPrint printer. This would be ONE of the following: 4915 4920 4925 FTP sites where this document is available You may FTP updated release packages from the following sites: ftp.xerox.com/pub/drivers spectrum.xerox.com/pub/drivers XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 1-1
ページ8に含まれる内容の要旨
1-2 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
ページ9に含まれる内容の要旨
2 Quick Setup SOLARIS 1.X , 2.X Overview: Quick Setup offers the experienced System Administrator a quick route to printer installation and configuration. Setup: 1. Verify physical cable connections from your printer to the network. See Network Interface Guide 2. Assign XPrint printer an IP Address at the control panel. See Appendix B 3. Add your XPrint printer’s TCP/IP address and hostname to your NIS database. For non NIS networks, add the TCP/IP address and hostname to your machine’s /et
ページ10に含まれる内容の要旨
6. Insert XPrint PostScript Print Tool installation diskette #1 into the floppy drive of your system. 7. To run XPrint installation script.: Solaris 1.X USERS: From a command line, TYPE: cd /tmp [ENTER] bar xvfp /dev/rfd0 [ENTER] XeroxInstall/setup [ENTER] Solaris 2.X USERS: From a command line, TYPE: volcheck [ENTER] cd /tmp [ENTER] cp /floppy/floppy0/setup . [ENTER] ./setup [ENTER] 8. Follow setup instructions to install the XPrint PostScript Print Tool. 9. Whe
ページ11に含まれる内容の要旨
3 Quick Setup NON SOLARIS UNIX Overview: Quick Setup offers the experienced System Administrator a quick route to printer installation and configuration. Setup: 1. Verify physical cable connections from your printer to the network. See Network Interface Guide 2. Assign XPrint printer an IP Address at the control panel. See Appendix B 3. Add your XPrint printer’s TCP/IP address and hostname to your NIS database. For non NIS networks, add the TCP/IP address and hostname to your machine’s /etc
ページ12に含まれる内容の要旨
CHOOSE YOUR UNIX VARIETY AND PERFORM THE FOLLOWING STEPS: Berkeley BSD UNIX: Add following entry to the /etc/printcap file (as root). Use “ ps” for “Remote Printer” entry (case sensitive). 49XX_hostname is host entry for the 49XX: 49XX:\ :lp=:\ :rm=49XX_hostname:\ :rp=ps:\ :sd=/var/spool/49XX:\ System 5 UNIX: Use the following lp command sequence (as root). Use “ ps” for “Remote Printer” entry (case sensitive). 49XX_hostname is host entry for the 49XX: /sbin/sh
ページ13に含まれる内容の要旨
4 Installation Overview SOLARIS 1.X /2.X 1. Verify physical cable connections from your printer to the network. 2. Configure your TCP/IP environment and the XPrint printer so they can communicate with each other. Details in Chapter 6 3. Install XPrint printer driver on server or station by ONE of the following methods: Floppy Disk Install: Details in Chapter 7 Network Install: Details in Chapter 9 4. Configure your UNIX workstation for any of the following printing environments: Solari
ページ14に含まれる内容の要旨
4-2 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
ページ15に含まれる内容の要旨
5 Installation Overview for NON SOLARIS Workstations 1. Verify physical cable connections from your printer to the network. 2. Configure your TCP/IP environment and the XPrint printer so they can communicate with each other. Details in Chapter 6 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 5-1
ページ16に含まれる内容の要旨
5-2 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
ページ17に含まれる内容の要旨
6 TCP/IP XPrint printer Configuration Overview: The XPrint printer by default receives its TCP/IP address dynamically from a RARP or BOOTP server. To override this setting, you can set the TCP/IP address at the control panel, by telnet, or by the PC and MAC Printer Services. To set up a RARP or BOOTP server, consult your Solaris documentation. It is recommended that initially, you set the IP address at the control panel. The XPrint TCP/IP parameters Subnet Mask and Default Gateway are optional
ページ18に含まれる内容の要旨
6-2 XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
ページ19に含まれる内容の要旨
7 XPrint PostScript Print Tool Installation (Floppy Disk) Overview: Xprint is supported currently in the Sun Solaris 1.X / 2.X operating systems. The XPrint PostScript Print Tool is both a print driver and a spooling daemon. The XPrint PostScript Print Tool and print daemon work in conjunction with your Solaris 1.X and 2.X printing and spooling mechanisms. A floppy disk installation is advisable for a small number of installations at a site (1-5) or for standalone workstations without a network
ページ20に含まれる内容の要旨
Solaris 1.X USERS: 3. From a command line, TYPE: cd /tmp [ENTER] bar xvfp /dev/rfd0 [ENTER] XeroxInstall/setup [ENTER] Solaris 2.X USERS: NOTE: Volume Manager must be set up to recognize the floppy drive 4. From a command line, TYPE: cd /tmp [ENTER] volcheck [ENTER] cp /floppy/floppy0/setup . [ENTER] ./setup [ENTER] 5. From the Install Print Driver and Utilities menu. Install Print Driver and Utilities 1) Install Driver and Utilities 2) Create an installation
