ページ1に含まれる内容の要旨
TEC Thermal Printer
B-SX5T SERIES
Owner’s Manual
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Gebruikershandleiding
Manuale Utente
Manual do Utilizador
ページ2に含まれる内容の要旨
CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. VORSICHT: • Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779) • Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht zugänglich sein. Centronics is a registered trademark of Centronics Data Computer Corp. Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
ページ3に含まれる内容の要旨
TEC Thermal Printer B-SX5T SERIES Owner's Manual
ページ4に含まれる内容の要旨
Waste Recycling information for users: Following information is only for EU-member states: The use of the crossed-out wheeled bin symbol indicates that this product may not be treated as general household waste. By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-ba
ページ5に含まれる内容の要旨
This product is equipped with a wireless communication device, TEC-RFID-US1 (B-9704-RFID-U1-US-R) TEC-RFID-EU1 (B-9704-RFID-U1-EU-R) Please be sure to read the enclosed precaution for handling of wireless communication devices before using this product. Precautions for Handling of Wireless Communication Devices RFID kit: TEC-RFID-US1 (B-9704-RFID-U1-US-R) TEC-RFID-EU1 (B-9704-RFID-U1-EU-R) For all countries and areas This product is a wireless communication device, and the use of th
ページ6に含まれる内容の要旨
Safety Summary ENGLISH VERSION EO1-33059 Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described
ページ7に含まれる内容の要旨
Safety Summary ENGLISH VERSION EO1-33059 If foreign objects (metal When unplugging the power cords, Disconnect Disconnect fragments, water, liquids) enter be sure to hold and pull on the plug the plug. the plug. the machines, first turn off the portion. Pulling on the cord portion power switches and disconnect may cut or expose the internal wires the power cord plugs from the and cause fire or electric shock. outlet, and then contact your authorised TOSHIBA TEC representative
ページ8に含まれる内容の要旨
ENGLISH VERSION EO1-33059 TABLE OF CONTENTS Page 1. PRODUCT OVERVIEW..........................................................................................................E1-1 1.1 Introduction.................................................................................................................... E1-1 1.2 Features........................................................................................................................ E1-1 1.3 Unpacking....................
ページ9に含まれる内容の要旨
ENGLISH VERSION EO1-33059 Page 5. TROUBLESHOOTING...........................................................................................................E5-1 5.1 Error Messages............................................................................................................. E5-1 5.2 Possible Problems......................................................................................................... E5-3 5.3 Removing Jammed Media........................................
ページ10に含まれる内容の要旨
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059 1.1 Introduction 1. PRODUCT OVERVIEW Thank you for choosing the TOSHIBA B-SX5T series thermal printer. 1.1 Introduction This Owner’s Manual contains from general set-up through how to confirm the printer operation using a test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA T
ページ11に含まれる内容の要旨
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059 1.4 Accessories When unpacking the printer, please make sure all the following 1.4 Accessories accessories are supplied with the printer. CD-ROM (1 pc.) NOTE: (P/No.: 7FM01647000) As a power cord is not supplied with this printer, please purchase • Bar code print application (Bartender ultra lite) one that meets each country’s • Windows Driver safety standard. For details, refer • Owner’s Manual • Speci
ページ12に含まれる内容の要旨
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059 1.5 Appearance The names of the parts or units introduced in this section are used in the 1.5 Appearance following chapters. 291 (11.5) 460 (18.1) 1.5.1 Dimensions 308 (12.1) Dimensions in mm (inches) Top Cover 1.5.2 Front View LCD Message Display Operation Panel Supply Window Media Outlet 1.5.3 Rear View PCMCIA Card Slot (Option), Parallel Interface USB
ページ13に含まれる内容の要旨
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059 1.5 Appearance LCD Message Display 1.5.4 Operation Panel POWER LED (Green) ON LINE LED (Green) ERROR LED (Red) [FEED] key [PAUSE] key [RESTART] key Please see Section 3.1 for further information about the Operation Panel. Locking Ring 1.5.5 Interior Ribbon Stopper Supply Holder Print Head Block Supply Shaft Print Head Platen Take-up Spool Head Lever Ribbon Shaft E1-
ページ14に含まれる内容の要旨
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059 1.6 Options 1.6 Options Option Name Type Usage Swing cutter B-4205-QM-R A stop and cut swing cutter. module Rotary cutter B-8204-QM-R Rotary cutter module PCMCIA B-9700-PCM-QM-R This board enables the use of the following PCMCIA cards. interface board ATA card: Conforming to PC card ATA standard Flash memory card: 1MB and 4MB cards (See Section 2.8.) Built-in LAN B-9700-LAN-QM-R This board enables the printer to be used in a LAN network.
ページ15に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2. PRINTER SETUP 2. PRINTER SETUP This section outlines the procedures to setup your printer prior to its operation. The section includes precautions, loading media and ribbon, connecting cables, setting the operating environment of the printer, and performing an online print test. Setup Flow Procedure Reference After referring to the Safety Precautions in this 2.1 Installation Installation manual, install the printer on a safe and sta
ページ16に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2.1 Installation To insure the best operating environment, and to assure the safety of the 2.1 Installation operator and the equipment, please observe the following precautions. • Operate the printer on a stable, level, operating surface in a location free from excessive humidity, high temperature, dust, vibration or direct sunlight. • Keep your work environment static free. Static discharge can cause damage to delicate internal component
ページ17に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2.2 Fitting the Fan Filter When installing the printer, it is important to ensure that the Fan Filter is 2.2 Fitting the Fan Filter attached before using the printer. The Fan Filter consists of 2 parts: (1) Filter Pad (2) Filter Retainer To fit the Fan Filter, put the Filter Pad inside the Filter Retainer and simply press into place as shown in the diagram below, ensuring connecting pins are aligned with the connecting holes.
ページ18に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2.4 Loading the Media The following procedure shows the steps to properly load the media into 2.4 Loading the Media the printer so that it feeds straight and true through the printer. WARNING! The printer prints both labels and tags. 1. Do not touch any moving parts. To reduce the risk 1. Turn off the power and open the Top Cover. of fingers, jewellery, 2. Turn the Head Lever to Free position, then release the Ribbon Shaft clo
ページ19に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2.4 Loading the Media 5. Put the media on the Supply Shaft. 2.4 Loading the Media 6. Pass the media around the Damper, then pull the media towards the (Cont.) front of the printer. 7. Align the projection of the Supply Holder with the groove of the NOTE: Supply Shaft, and push the Supply Holder against the media until the Do not over-tighten the Locking media is held firmly in place. This will centre the media Ring of the Supply Holder.
ページ20に含まれる内容の要旨
2. PRINTER SETUP ENGLISH VERSION EO1-33059 2.4 Loading the Media 10. Lower the Print Head Block until it stops. 2.4 Loading the Media 11. After loading the media, it may be necessary to set the Media (Cont.) Sensors used to detect the print start position for label or tag printing. Setting the Feed Gap Sensor position (1) Remove the Locking Screw that secures the Media Sensor. (2) Manually move the Media Sensor so that the Feed Gap Sensor is positioned at the centre of the l
