ページ1に含まれる内容の要旨
TEC Color Printer
CB-416-T3-QQ
Owner’s Manual
ページ2に含まれる内容の要旨
We, TOSHIBA TEC Corporation of 570 Ohito Ohito-cho Tagata-Gun Shizuoka-Ken 410-2323 JAPAN, declare in our sole responsibility that this product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This accordance with the instruction manual, may cause harmful interference to radio c
ページ3に含まれる内容の要旨
Safety Precautions Safety Precautions Personal safety in handling or maintaining the equipment is extremely Safety Summary important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manu
ページ4に含まれる内容の要旨
Safety Precautions This indicates that there is the risk of death or serious injury if the WARNING machines are improperly handled contrary to this indication. n Do not use voltages other than the voltage (AC) specified on the rating plate, as this may cause fire or electric shock. Any other than the specified AC voltage is prohibited. n If the machines share the same outlet with any other electrical appliances which consume large amounts of power, the voltage will fluctuate widely each time
ページ5に含まれる内容の要旨
Safety Precautions WARNING (Cont.) n Do not cut, damage or modify the power cords. Also, do not place heavy objects on, pull on, or excessively bend the cords, as this may cause fire or electrical shock. Prohibited n Continued use of the machines in an abnormal condition such as when the machines are producing smoke or strange smells may cause fire or electric shock. In these cases, immediately turn off the power switches and disconnect the power cord plugs from the outlet. Then, contact
ページ6に含まれる内容の要旨
Safety Precautions This indicates that there is the risk of personal injury or damage to objects if the machine is improperly handled contrary to this CAUTION indication. The following precautions will help to ensure that this machine will continue to function correctly. • Try to avoid locations that have the following adverse conditions: * Temperatures out of the specification * Direct sunlight * High humidity * Shared power source * Excessive vibration * Dust/Gas • The cover should b
ページ7に含まれる内容の要旨
Table of Contents Contents Table of Contents 1. Product Overview ................................................................................................................................................... 1 1.1 Introduction ...................................................................................................................................................... 1 1.2 Features.......................................................................................................
ページ8に含まれる内容の要旨
Table of Contents 3.6 Stock .............................................................................................................................................................. 54 3.6.1 Print Method.......................................................................................................................................... 54 3.6.2 Sensor .........................................................................................................................................
ページ9に含まれる内容の要旨
Chapter 1 Product Overview 1. Product Overview 1.1 Introduction Thank you for choosing the TOSHIBA TEC CB-416-T3 color printer. This Owner’s Manual describes printer setup and installation procedures, printer properties, settings and adjustments, and maintenance information. Thus it should be read carefully to help gain maximum performance and life from the printer. For further information please refer to this manual and keep it safe for future reference. The CB-416-T3 color printer h
ページ10に含まれる内容の要旨
Chapter 1 Product Overview When unpacking the printer, please make sure all accessories are 1.4 Accessories and packed with the printer. Options 3 1.4.1 Accessories Owner’s Manual (1 pc.) Power Cord (1 pc.) (FBC B0030202) Thermal Head Cleaner (1 pc.) Feed Roller Brush (1 pc.) (24089500013) (FMQB0047001) *To be used exclusively for the Feed Roller Fan Filter (2 sets.) Media Slide (1 pc.) (FMBB0046401) (FMCC 0032001) Black Screw (2 pcs.) (HAA-0007002) (1pc.) Supply Shaft Holder (1 pc.) Su
ページ11に含まれる内容の要旨
Chapter 1 Product Overview Ribbon Plate (4 pcs.) Mounting Screw (4 pcs.) 1.4.2 Cool Release (FMCB 0095301) (FMDB 0079501) Enhancement Kit D-3x5 Screw (12 pcs.) SP Ribbon Guide (A) (1 pc.) (X0140305130) (FMCB0095601) (4 pcs.) SP Ribbon Guide (B) (3 pcs.) Ribbon Tension Sheet (FMCB0095501) (FMQC0035901) Sheet Fixing Plate (4 pcs.) (FMEB0116901) 1.4.3 Options The following two options are available for the CB-416-T3 color printer: • The CB-1204-QM Cutter Module, which is used to cut media
ページ12に含まれる内容の要旨
Chapter 1 Product Overview The names of the parts or units introduced in this section are used in 1.5 Appearance the following chapters. 1.5.1 Dimensions 13.7(350) 20.4(520) 11.0(280) Note: Depth is 34.4 inches (875mm) when the Cutter Module is installed on the printer. 15.1 (385) Dimensions in inches + (mm) 1.5.2 Front View Top Cover Message Display (LCD) Supply Roll Holder Supply Shaft Holder Operation Panel Supply Shaft Holder Stand Media Outlet 1.5.3 Rear View Serial Interface Conne
ページ13に含まれる内容の要旨
Chapter 1 Product Overview 1.5.4 Operation Panel Message Display (LCD) ON LINE LED (Green) ERROR LED POWER LED (Green) (Red) POWER ON LINE ERROR FEED Key FEED RESTART PAUSE PAUSE Key RESTART Key Please see Appendix 3 for further information about the Operation Panel. 1.5.5 Interior Top Cover Print Head Block Pinch Roller Unit Head Lever Pinch Roller Lever Ribbon Module Media Pressure Plate 5
ページ14に含まれる内容の要旨
Chapter 2 Printer Installation 2. Printer Installation This chapter describes in detail how to set up the printer to get ready for printing. First install the accessories on the printer. 2.1 Installing the Accessories 2.1.1 Fan Filters 1 Unpack the Fan Filters. 2 Mount the Fan Filters over the Air Vents. Filter Pad Note: Filter Retainer Please clean the Filter Pads Air Vents (Cooling Fans) periodically. See Section 5.1.3. 2.1.2 Media Slide Attach the Media Slide with the two supplied b
ページ15に含まれる内容の要旨
Chapter 2 Printer Installation The printer can be connected to any computer, since it supports both 2.2 Connecting the serial and parallel interface cables. Before connecting the printer, Printer to Your please make sure which interface cable will be used. Computer 1 Be sure that both printer and computer are turned off. Note: (o) indicates OFF. The interface cable is not included in the accessories. Power Switch 2 Connect the interface cable to the interface connector on the printer.
ページ16に含まれる内容の要旨
Chapter 2 Printer Installation CAUTION! 2.3 Connecting • Please turn off the printer before connecting the power cord, the Power as this may cause an electric shock or damage to the printer. Cord • Please use the supplied power cord only. Use of other cords may cause an electric shock or a fire. 1 Be sure that both printer and computer are switched OFF. (o) indicates OFF. Power Switch 2 Connect the supplied power cord to the AC Power Inlet of the printer. AC Power Inlet 3 Plug the powe
ページ17に含まれる内容の要旨
Chapter 2 Printer Installation When turned on, the printer checks the print head and memory. 2.4 Turning on/off When turned off, the printer will lose data in non-volatile memory. the Printer CAUTION! Use the power switch to turn on/off the printer. Unplugging the power cord for turning on/off the printer may cause a fire, an electric shock, or damage to the printer. Important! When the printer is connected to the computer, • Turn ON the printer before turning on the computer. • Turn O
ページ18に含まれる内容の要旨
Chapter 2 Printer Installation 2.4.2 Turning off the 1 When turning off the printer, make sure of the following: Printer • The “ON LINE” message is shown on the Message Display. • Both POWER and ON LINE LED’s are illuminated. CAUTION! ON LINE • Do not turn off the printer while a label is being issued, as this may cause a paper jam POWER ON LINE ERROR or damage to the printer. • Do not turn off the printer FEED RESTART PAUSE when the ON LINE LED is blinking, as this may cause damage to
ページ19に含まれる内容の要旨
Chapter 2 Printer Installation Labels or tags can be loaded in the printer. The media loading 2.5 Loading the procedure depends on which media is going to be used. Media 1 Open the Top Cover. Top Cover 2 Lift the Pinch Roller Lever to the ROLLER RELEASE position to open the Pinch Roller Unit. Pinch Roller Unit Pinch Roller Lever (To ROLLER RELEASE) 3 Loosen the screw on the Supply Shaft Holder Stand. 4 Fit the Supply Shaft Holder Stand to the Supply Shaft, as illustrated Note: below.
ページ20に含まれる内容の要旨
Chapter 2 Printer Installation 6 Turn the Supply Shaft so that the notches face upward, and the 2.5 Loading the marks face the Media Inlet. Media (Cont.) 7 To attach the Supply Roll Holder (inside), fit the tooth of the Supply Roll Holder to the groove of the Supply Roll Shaft. Turn the Supply Roll Holder clockwise to the end. Notches Groove Supply Roll Holder Claw Marks Tooth Claw Supply Shaft Supply Roll Holder 8 Push the Supply Roll Holder (inside) to the end of the Supply CAUTION!
