ページ1に含まれる内容の要旨
3350DNP/5450
OPERATING INSTRUCTIONS
TPEH162N
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
ページ2に含まれる内容の要旨
Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class A digital devices, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause har
ページ3に含まれる内容の要旨
Safety Information When using your machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Ignoring this warning could cause serious injury or even death. R CAUTION: Ignoring this caution could cause injury or damage to property. Examples Of Indications Symbols R mean a situation that requires you take care. Do NOT carry out the operation represented by this symbol . m This example means “D
ページ4に含まれる内容の要旨
R R R RWarning: • Only connect the machine to the power source described on the inside front cover of this manual. • Avoid multi-wiring. • Do not damage, break or make any modifications to the pow- er cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an elec- tric shock or fire. • Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur. • Make sure the wall outlet is near the machine and fre
ページ5に含まれる内容の要旨
R R R RCaution: • Keep the machine away from humidity and dust. A fire or an elec- tric shock might occur. • Do not place the machine on an unstable or tilted surface. If it top- ples over, it could cause injury. • After you move the machine, fix it with the caster fixture. Other- wise, the machine might move or come down to cause a personal injury. • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine will not be used for a
ページ6に含まれる内容の要旨
• Keep the ink or ink container out of reach of children. • If ink is ingested, force vomiting by drinking a strong saline solu- tion and consult a doctor immediately. • Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters. • While printing, do not touch the belt at the end of the paper deliv- ery tray or the job separator. You might be injured. • When your machine is equipped with the PC controller option: • Do not plac
ページ7に含まれる内容の要旨
How To Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in- structions under this symbol. Be sure to read the instructions, all of which are de- scribed in the Safety Information section. R CAUTION: This symbol indicates a potentially hazardous situation that might result in mi- nor or moderate injury or property
ページ8に含まれる内容の要旨
Making Prints Before making prints using this ma- B Press the key. { {{ {Start} }} } chine, you have to make a master by Program Clear Modes pressing the key. When you {Start} Auto Cycle press the key, the machine {Start} Proof scans the original image and makes a master. This procedure describes Print how to make basic prints. Enter Start A Set your originals. Clear/Stop TPES050N When you set original on the exposure glass (contact glass) C Press the { {{ {Proof} }} } key. A Set one origina
ページ9に含まれる内容の要旨
key. See P.26 “Adjusting Print ⇒ Image Density”. Speed Combine Class Slow Fast 1 TPES100N DEnter the desired number of prints with the Number keys. Program Clear Modes Auto Cycle Proof Print Enter Start Clear/Stop TPES040N E Press the { {{ {Print} }} } key. Program Clear Modes Auto Cycle Proof Print Enter Start Clear/Stop TPES070N When the print job has finished, press the {Clear Modes} key. Previ- ously entered job settings will be cleared. vii
ページ10に含まれる内容の要旨
What You Can Do With This Machine ❖ ❖ ❖ ❖ Standard Printing ❖ ❖ ❖ ❖ Reducing And Enlarging Using Preset See P.20 “Standard Printing”. ⇒ Ratios See ⇒ P.30 “Preset Reduce/En- ❖ ❖ ❖ ❖ Adjusting Print Image Position large—Reducing And Enlarging Us- See ⇒ P.25 “Adjusting Print Image ing Preset Ratios”. Position”. GRRATI0E GRPOSI0E ❖ ❖ ❖ ❖ Having The Machine Choose The Re- production Ratios *: Paper feed direction See ⇒ P.32 “Auto Magnification Se- lection—Having The Machine Choose ❖ ❖ ❖ ❖ Adjusting
ページ11に含まれる内容の要旨
❖ ❖ ❖ ❖ Stretching And Squeezing The Image The Same Original Using All Stored Data”. In 1 % Steps See ⇒ P.37 “Directional Magnifica- tion—Stretching And Squeezing The Image In 1 % Steps”. GRCLAS2E ❖ ❖ ❖ ❖ Making Variable Numbers Of Prints GRDIRE0E From The Same Original Using Stored Data ❖ ❖ ❖ ❖ Erasing Edge Margins See ⇒ P.53 “Auto Class Mode— See ⇒ P.40 “Edge Erase—Erasing Making Variable Numbers Of Prints Edge Margins”. From The Same Original Using Stored Data”. AB AB GRERAS0E ❖ ❖ ❖ ❖ Printin
ページ12に含まれる内容の要旨
❖ ❖ ❖ ❖ Making Variable Numbers Of Prints ❖ ❖ ❖ ❖ Having Images Repeated On One From Different Originals Print See ⇒ P.58 “Manual Class Mode See ⇒ P.68 “Auto Combine Mode— With 2 Or More Originals—Making Having Images Repeated On One Variable Numbers Of Prints From Print”. Different Originals”. 1 11 A B A B C C D D GRACOM0E GRCLAS1E ❖ ❖ ❖ ❖ Skip Feed Printing ❖ ❖ ❖ ❖ Making Fixed Numbers Of Prints See ⇒ P.70 “Skip Feed Printing”. From The Same Original ❖ ❖ ❖ ❖ Storing Your Print Settings In Memo
ページ13に含まれる内容の要旨
❖ ❖ ❖ ❖ On Line Printing ❖ ❖ ❖ ❖ Having The Date Stamped On Your See ⇒ P.80 “On Line Printing”. Prints See ⇒ P.115 “Stamping Date—Hav- ❖ ❖ ❖ ❖ Making Color Prints ing The Date Stamped On Your See P.87 “Making Color Prints”. ⇒ Prints”. ❖ ❖ ❖ ❖ Printing In Two Colors See ⇒ P.88 “Printing In Two Col- '98.7.25 ors”. R R GRDATE0E P P ❖ ❖ ❖ ❖ Having Page Numbers Stamped On Your Prints GRCOLO0E See ⇒ P.117 “Page Stamping—Hav- ing Page Numbers Stamped On Your ❖ ❖ ❖ ❖ Rotating The Original Images Prints
ページ14に含まれる内容の要旨
❖ ❖ ❖ ❖ Printing Your Own Messages On Your Prints See ⇒ P.122 “User Stamping— Printing Your Own Messages On Your Prints”. R GRUSTA0E ❖ ❖ ❖ ❖ Combining Originals Into One Print With The Memory Board See ⇒ P.124 “Memory Combine— Combining Originals Into One Print With The Memory Board”. 1 2 3 4 12 3 4 GRMCOM0E GRREPE0E xii
ページ15に含まれる内容の要旨
TABLE OF CONTENTS Machine Exterior........................................................................................ 1 Machine Interior......................................................................................... 2 Options....................................................................................................... 4 Operation Panel......................................................................................... 6 Keys ..........................................
ページ16に含まれる内容の要旨
Entering The Dimensions Of The Original And Print Paper ........................ 38 Edge Erase—Erasing Edge Margins...................................................... 40 Printing On Various Kinds Of Paper...................................................... 42 Printing On Thick Paper .............................................................................. 42 Printing On Thin Paper................................................................................ 42 Printing On Envelopes .
ページ17に含まれる内容の要旨
2.OPTIONAL FUNCTIONS Printing Using The Optional Document Feeder.................................... 81 Originals ...................................................................................................... 81 Setting Originals In The Document Feeder................................................. 82 Combine Originals Printing With The Document Feeder ............................ 83 Manual Class Mode With 2 Or More Originals Using The Document Feeder.... 84 Color Printing Using The Op
ページ18に含まれる内容の要旨
2. Set Operation Modes ............................................................................ 136 3. Initial Setting.......................................................................................... 137 4. Mode Setting ......................................................................................... 139 5. Stamp.................................................................................................... 144 6. Set User Code (s) .......................................
ページ19に含まれる内容の要旨
Poor Printing.......................................................................................... 185 Dirty Background....................................................................................... 185 Black Line/Stain ........................................................................................ 188 Skipped Prints ........................................................................................... 188 5.REMARKS Operation Notes......................................
ページ20に含まれる内容の要旨
This page is intentionally blank. xviii
