ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. © 2000 Samsung Electronics Co., Ltd. All rights reserved. • ML-4600 and Samsung logo are trademarks of Samsung Electronics Co., Ltd. • IBM and IBM PC are trademarks of International Business Machines Corporation. • Microsoft, Windows, Windows 9x, Wind
ページ3に含まれる内容の要旨
Contents Introduction 1 Special Features ––––––––––––––––––––––––––––––––– 1.1 Printer Components –––––––––––––––––––––––––––––– 1.3 Setting Up Your Printer 2 STEP 1: Unpack Your Printer –––––––––––––––––––––––––– 2.1 STEP 2: Install the Toner Cartridge ––––––––––––––––––––– 2.2 STEP 3: Load Paper ––––––––––––––––––––––––––––––––– 2.4 STEP 4: Connect to the Computer with a Parallel Cable ––––– 2.6 STEP 5: Turn on the Printer ––––––––––––––––––––––––––– 2.7 STEP 6: Print a Demo Page! ––––––––––––
ページ4に含まれる内容の要旨
Printing Tasks 5 Printing a Document ––––––––––––––––––––––––––––––– 5.1 Using Toner Save Mode –––––––––––––––––––––––––––– 5.6 Printing Multiple Pages on One Sheet of Paper –––––––––– 5.7 Fitting Your Document to a Selected Paper Size ––––––––– 5.8 Printing Posters ––––––––––––––––––––––––––––––––––– 5.9 Setting Graphic Properties ––––––––––––––––––––––––– 5.11 Printing Watermarks –––––––––––––––––––––––––––––– 5.14 Using Page Overlay ––––––––––––––––––––––––––––––– 5.17 Reprinting the Last Pag
ページ5に含まれる内容の要旨
Environmental and Safety Consideration Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, u
ページ6に含まれる内容の要旨
Environmental and Safety Consideration Ozone Safety During normal operation, the Samsung ML-4600 printer produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please contact your nearest Samsung dealer. Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the
ページ7に含まれる内容の要旨
Environmental and Safety Consideration Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you must first stop operation of the equipment. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules. Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in
ページ8に含まれる内容の要旨
1 1 Congratulations on your purchase of a Samsung ML-4600 printer! This chapter provides information on the following topics: Special Features Printer Components
ページ9に含まれる内容の要旨
Special Features Samsung ML-4600 is a versatile, productive printer equipped with special features that will improve print quality, giving you a competitive edge. You can: Print with excellent quality and high speed • You can print at 1200 dpi class. See page 5.12. • Your printer prints 8 pages-per-minute. • The PCL 6 printer language enables fast printing performance. Flexible paper handling • Standard 150-sheet automatic feeder and a 1-sheet manual feeder supports various sizes and types of pa
ページ10に含まれる内容の要旨
Special Features Create professional documents • You can customize your documents by using Watermarks such as “Confidential.” See page 5.14. Dear ABC • Preprinted forms and letterheads can be printed on plain Regards paper. See page 5.17. WORLD BEST • Print Posters. The text and pictures of each page of your document are magnified and printed across the selected sheet of paper. After the document has printed, trim off the white edges of each sheet. Tape the sheets together to form a poster. See
ページ11に含まれる内容の要旨
Printer Components Front View Paper support Paper output support Automatic input tray Face-down output tray Paper guides Manual input tray Output lever Front cover Face-up output slot Control panel INTRODUCTION 1.3
ページ12に含まれる内容の要旨
Printer Components Inside View Toner cartridge Front cover Rear View Power switch Parallel port Power receptacle USB port 1.4 INTRODUCTION
ページ13に含まれる内容の要旨
2 2 This chapter provides step by step information on setting up your printer. Topics included in this chapter are: STEP 1: Unpack Your Printer STEP 2: Install the Toner Cartridge STEP 3: Load Paper STEP 4: Connect to the Computer with a Parallel Cable STEP 5: Turn on the Printer STEP 6: Print a Demo Page! STEP 7: Install the Printer Software Installing Software from Diskette
ページ14に含まれる内容の要旨
Unpack Your Printer 1 Remove the printer and all accessories from the packing carton. Make sure that your printer has been packed with the following items: Power cord Toner cartridge Notes: • If any items are missing or damaged, Parallel cable CD-ROM* notify your dealer immediately. • Components may differ from one country to another. Paper Output Support Setup Guide * contains the printer driver, the User’s Guide, the Adobe Acrobat Reader program, and the Make Your Own Diskette setup software.
ページ15に含まれる内容の要旨
Install the Toner Cartridge 1 Grasp both sides of the front cover and open it by pulling it towards you. 2 Remove the toner cartridge from its bag and then remove the paper covering it. Discard the paper. 3 Gently shake the cartridge from side to side to evenly distribute the toner inside the cartridge. CAUTION: To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper, if left exposed for more than a few minutes. If toner gets on y
ページ16に含まれる内容の要旨
Install the Toner Cartridge 4 Locate the cartridge slots inside the printer, one on each side. 5 Grasp the handle and insert the cartridge in the printer until it snaps into place. 6 Close the front cover. Make sure that the cover is securely closed. Note: When printing text at 5% coverage, you can expect a toner cartridge life of approximately 2,500 pages (1,000 pages for the toner cartridge that is shipped with the printer). SETTING UP YOUR PRINTER 2.3
ページ17に含まれる内容の要旨
Load Paper 1 Pull the paper support on the automatic input tray up, until it stops. 2 Before loading the paper, flex the sheets back and forth to loosen them, and then fan them. Tap the edges of the stack on a table top to straighten them and prevent paper jams. 3 Load a stack of paper into the automatic input tray with the print side facing up. 2.4 SETTING UP YOUR PRINTER
ページ18に含まれる内容の要旨
Load Paper 4 Do not load too much. This tray holds up to 150 sheets. Keep the paper below this height mark. 5 Adjust the paper guides to the width of the paper stack. Notes: • Do not push the width guide so far that it causes the paper to warp. • Failure to adjust the width guide properly can result in paper jams. SETTING UP YOUR PRINTER 2.5
ページ19に含まれる内容の要旨
Connect to the Computer with a Parallel Cable 1 Make sure that both the printer and the computer are turned off. 2 Plug the parallel printer cable into the connector on the back of the printer. Push the metal clips down to fit inside the notches on the cable plug. 3 Connect the other end of the cable to the parallel interface port on your computer, and tighten the screws. ➜ See your computer documentation if To the parallel you need help. port on PC If you are using a USB interface Go to “Usi
ページ20に含まれる内容の要旨
Turn on the Printer 1 Plug the power cord into the power receptacle on the back of the printer. 2 Plug the other end into a properly grounded AC outlet. 3 Turn on the power. ➜ To AC outlet Print a Demo Page! As the printer powers up, all the printer control panel lights turn on briefly. When only the Data light remains on, press and hold the Demo button. Hold down the button for about 2 seconds until all lights blink slowly. Then release the button and the demo page will print. The demo page pro
