ページ1に含まれる内容の要旨
ETHERNET INFORMATION
Monarch offers an internal Ethernet connectivity solution. The
MonarchNet Ethernet Print Server makes it easy to setup and configure
printers on a network. It allows you to consistently configure your printers
through the network. You can also remotely manage and download
upgraded print batches, formats, printer configurations, and fonts.
The MonarchNet print server supports the Monarch 9840 (version 6.5 or
greater) or Monarch 9825/9850 (version 1.0 or greate
ページ2に含まれる内容の要旨
Setting Up the Print Server For the 9840 printer: To use the Ethernet print server (with the 9840 printer), upper DIP switch 8 must be turned ON. This enables the bi-directional communication. Upper DIP Switches Ethernet Port Parallel Port Serial Port 9840 Printer Pictured Do not plug any cables into the parallel port when using the Ethernet port. A printer with an Ethernet port cannot use the parallel port. However, the serial port is still active. For the 9825 and 9850 pri
ページ3に含まれる内容の要旨
3. Press Enter/Pause to select the internal port. After setting the port to internal, change the MODE to enable bi-directional communications. 4. Press l or r until you see PARALLEL COMM l Mode 5. Press Enter/Pause. You will see MODE Compatible r 6. Press r to display the other option, IEEE1284 and press Enter/Pause. This selects IEEE1284 for bi-directional Ethernet communications. (Compatible mode is used with a computer connection and a parallel cable.) Configuring the
ページ4に含まれる内容の要旨
Printing a Configuration Label Configuration information prints automatically if the Ethernet print server senses a hardware error. To print configuration information on demand, press the Test button on the side of the Ethernet print server unit or use the configuration utility provided for your network operating system. The configuration label prints in MPCL format. The configuration label is best displayed using 4” wide by 6” long labels. If the label is too small, some informatio
