ページ1に含まれる内容の要旨
LSQ-40L
LABEL PRINTING SCALE
QUICK START
MANUAL
REV 1.0
PAGE 1
ページ2に含まれる内容の要旨
INDEX Before you begin……………………………………………………………2 Cleaning the scale Requirements for using a computer to program Setting up scale for first use………………………………………………..4 Testing printer Printing your first label……………………………………………………..5 Setting up the network……………………………………………………..6 Connecting the devices Installing the software Configuring you computer Configuring your scale(s)…………………………………………………..7 Starting up the software……………………………………………………8 Adding scales to the network Co
ページ3に含まれる内容の要旨
BEFORE YOU BEGIN Please read this section carefully. The following has some important safeguards to prevent damage or failure of your scale. CLEANING THE SCALE: 1). You may use stainless cleaner or mild soap to wipe down the metal areas of the scale. The keyboards and display should be wiped down with a damp cloth only. While the keyboards and display are reasonably sealed, do not allow liquids to get between the plastic surfaces and the metal. 2). Use only the supplied clean
ページ4に含まれる内容の要旨
Network Adapter with category 5 cables The picture above shows an example of a 5 port hub. One computer and up to 4 scales can be connected for programming. NOTE: It is not necessary to have a computer to program your scale. Programming can be done by using the keyboard on the scale. However, it is much easier to program using a computer especially if you have more than one scale. A few other advantages of using a computer are: 1). Information
ページ5に含まれる内容の要旨
SETTING UP THE SCALE FOR FIRST TIME 1). Carefully unpack scale from its box. Lift the indicators arm all the way up until it stops. Adjust the correct angle of the indicator by loosening the black nut on the arm next to the indicator. Move the indicator to the correct angle and then tighten the nut. DO NOT over tighten. 2). Plug in the ac adapter to the wall socket and the other end into the scale. The connector may appear tight on a new scale. You might try twisting the connector
ページ6に含まれる内容の要旨
TO PRINT A LABEL (continued): 1). Place a product on the platter. Enter in the price. Press PRINT. A label should dispense with printed information such as weight, date, total sale, etc. NOTE: The printer will not print a label if no price is entered, no weight is on the platter or negative weight is displayed on the indicator. Repeat steps on page 5 if no label comes out. **CONGRADULATIONS!!** You have just printed your first label.
ページ7に含まれる内容の要旨
SETTING UP THE NETWORK (Skip this part if not using a computer) ____________________________ 1). Connect up the equipment as shown in the drawing below. 2). Place the Scalenet (LSQ-40L) software CD in your drive. The auto install should begin automatically. Complete the installation as instructed. NOTE: This software is intended to run on a Windows XP operating system with SP2 (Service Pack 2) installed only. CONFIGURING YOUR NETWORK ON YOUR COMPUTER: 1). Click on START
ページ8に含まれる内容の要旨
NOTE: If you are already using a network connection for another application, you may want to create a new connection and configure it for scale communications. CONFIGURING YOUR NETWORK ON THE SCALE: The scales network IP address should already be configured from the factory. If you want to check it or if you are using more than one scale, follow the procedure below. TO SEE/CHANGE SCALES IP ADDRESS: 1). If the scale is on, turn it off. 2). Turn on the scale. During the coun
ページ9に含まれる内容の要旨
STARTING UP THE LSQ-40L SOFTWARE (Be sure your scale and hub are powered up and connected at this time) 1). Launch the LSQ-40L software. On the logon screen, do not enter a password. Click on ACCEPT to continue. 2). At the top of the screen, click on MAINTENANCE and then SCALE MASTER. Below is the screen you should be viewing at this point. SCALE MASTER allows you to add new scales to the network. You will have to add each scale to the network one at a time. As long as you
ページ10に含まれる内容の要旨
2). Go to the first IP box and click in it. Enter the first number. Press TAB and enter the second number. Repeat for the last two numbers. 3). Click on SEARCH FOR SCALES. If the network detects the scale, it will ask you ‘Do you want to add scale?’. Click YES. 4). The scales information should appear on the screen. If you have more than one scale, repeat step 1. NOTE: If you get an Enable message, the network did not find the scale. Either you entered the wrong IP address, or the
ページ11に含まれる内容の要旨
ADDING PRODUCTS TO THE SCALE: 1). Click on NETWORK, then NET DISTRIBUTION (keep this window open while programming). On the left side of the screen, you can see your scale(s) and a Group1 icon. This is the network tree. You can drag and drop scales into different groups. You can also create/delete groups by right clicking in the tree box. By creating groups, you can program several scales at once with the same information. When you click on a group, all scales in that group will be
ページ12に含まれる内容の要旨
Ingredient: Enter number as defined by ingredient table. This table has to be programmed in the Ingredients Master selection (found under MAINTENANCE). MOVING PRODUCTS TO AND FROM SCALE: 1). Click on PLU’S pull down arrow and click on READ. 2). Click on COPY. This should open 2 windows. The left window is what will be uploaded to the scale. The right window is the master products selection. 3). To add a product to the plu list, click on the product the click COPY PLU. 4). When
ページ13に含まれる内容の要旨
GENERAL CONFIGURATION: This will configure label printing features, and lock/unlock other features, setting up the bar code, etc. Click on CONFIGURATION, then READ. SCROLLING MESSAGE: This message will scroll across your indicator when there are no sales in progress. INGREDIANTS: The number of lines dedicated for ingredient text on the label. HEADLINES: The number of lines of text that appears at the top of the label. Usually your store name, address, etc. NOTE: The more
ページ14に含まれる内容の要旨
PRINTED TEXT ON LABEL: This allows you to change the text as it appears on the label. An example is if you would like to change Agent and have it print Employee instead. PRINT FORMAT: You can choose a selection of print formats. You can use labels or paper rolls. There are 4 preset formats or you can customize your own label. TO CUSTOMIZE A LABEL: 1). Select a LABEL/PAPER type. 2). Select CUSTOMIZE and then VIEW. 3). In the label window, you can drag and drop where you
ページ15に含まれる内容の要旨
PROGRAMMING USING THE SCALES KEYBOARDS This Section is for programming and editing without the use of a computer. Before you start programming your scale, you should perform startup operations on pages 4 and 5. This will confirm the scale is operating normally and will make programming easier. You can change the settings later if you need to. NOTE: At any time you need to enter PROGRAMMING MODE, please follow steps 1 to 3 on page 4 under QUICK TEST OF THE PRINTER. TO ENTER STORE
ページ16に含まれる内容の要旨
NOTE: You can have up to 10 lines printed on the label. It is recommended no more than 2 lines used so all other text can be printed. Too much text will go past the end of the label causing another label to be used. You can correct this by making font sizes smaller, using less text lines, or using longer labels. TO SET AMOUNT OF TEXT LINES TO BE PRINTED: 1). Press ESC until HEADLINES appear. Press ENTER. 2). LINE 1 appears. Press arrow down until # LINES appear. Press ENTER. 3)
ページ17に含まれる内容の要旨
CONFIGURATION: This sets up the scales time, date, and prefences of the scale. Extreme care should be used as some features can cause loss of memory or be locked out of programming features. 1). Enter PROGRAMMING MODE. 2). Press the CONFIG button. What you can program in CONFIG: DATE (DDMMYR) Must be in this format. HOUR (HRMM) Must be in 24 hour format. MODE (AGENTS – ENABLE/DISABLE) and (NON PLU – ENABLE/DISABLE) NOTES: AGENTS enabled requires employee to enter in
ページ18に含まれる内容の要旨
SETTING UP THE LABEL PRINT: If you are satisfied the way the labels are being printed, you can skip this section. If you are using Safe Handling Labels or want to customize your own label, then proceed to the next step. REMOVING THE BAR CODE: 1). Enter PROGRAMMING MODE. 2). Press PROG FORMAT. 3). Press ENTER when you see FORMAT. 4). Use arrow up/dwn to find LABEL W/ GAP. Press ENTER. 5). Use arrow up/dwn to find CUSTOMIZED. Press ENTER. 6). Press ESC twice. Arrow dow
ページ19に含まれる内容の要旨
You should see something similar to PCCCCCCWWWWW. This is the bar code layout. Below are the meanings of the letters that make up the bar code. P = PREFIX (start code) W= WEIGHT C= PRODUCT CODE T = TOTAL SALE A = AGENTS# N = QUANTITY OF PRODUCTS X = NULL VARIABLE The prefix code usually starts with 2 or 02. So the first letter(s) will have to be P or PP. Most weighed barcodes look like PCCCCCCTTTTT or PPCCCCCTTTTT. The th 13 digit is the end code that is set by
ページ20に含まれる内容の要旨
Below is a list of what you can put on a label. HEADLINE- Store information DESCRIPTION- Product name WEIGHT TEXT- The word WEIGHT WEIGHT – The weight of the product PRICE TEXT- The word PRICE PRICE- The price of the product TOTAL TEXT- The word TOTAL INGREDIENTS- Ingredients BAR CODE- The bar code (usually at the bottom but above add. text) DATE TEXT- The word DATE DATE- Today’s date SELL BY TEXT- The words SELL BY SELL BY- Expiration date of product ADDITIONAL TEXT- Usually
