ページ1に含まれる内容の要旨
Removing an output option 1
Printing
Follow these instructions to remove a finisher, 5-bin mailbox, high-capacity output stacker, or
output expander. The following steps explain how to remove an output expander as an
example.
Paper handling
1 If you are removing the topmost output option and do not plan to return it to that
position, remove the top cover.
If you are removing a finisher, skip to step 4.
Maintenance
Troubleshooting
Administration
Index
You must attach the top cover to the p
ページ2に含まれる内容の要旨
Removing an output option 2 Printing 2 Detach the output expander tray. If you are removing a 5-bin mailbox or high-capacity output stacker, skip to step 3. Paper handling a Lift the edge of the tray so the lower tabs come out of the slots on the output expander. Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark T620 and T622
ページ3に含まれる内容の要旨
Removing an output option 3 Printing b Pull the tray straight out toward you to remove the upper tabs from the output expander slots. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark T620 and T622
ページ4に含まれる内容の要旨
Removing an output option 4 Printing 3 The output option may have a wire paper bail attached. If so, remove the tips of the paper bail from the ends of the plastic bracket on the bottom of the output option. Refer to the Setup Guide when you are ready to reattach the paper bail to an output Paper handling option. Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark T620 and T622
ページ5に含まれる内容の要旨
Removing an output option 5 Printing 4 Carefully lift the option straight up until it is completely disconnected from the option below it or from the printer. Set it aside. Paper handling Maintenance Troubleshooting Administration Warning: The edges of the mounting brackets could damage tabletops or fabrics. 5 Refer to the Setup Guide when you are ready to reattach options. Index www.lexmark.com Lexmark T620 and T622
