ページ1に含まれる内容の要旨
Lexmark E360d and E360dn Series
User's Guide
August 2011 www.lexmark.com
Machine type(s):
4513
Model(s):
420, 430
ページ2に含まれる内容の要旨
Contents Safety information.......................................................................................5 Learning about the printer...........................................................................7 Thank you for choosing this printer!.........................................................................................................7 Finding information about the printer.....................................................................................................
ページ3に含まれる内容の要旨
Printing......................................................................................................49 Printing a document................................................................................................................................49 Printing specialty documents..................................................................................................................50 Printing information pages..................................................................
ページ4に含まれる内容の要旨
201 paper jam.........................................................................................................................................97 202 paper jam.........................................................................................................................................98 231 paper jam.........................................................................................................................................99 233 paper jam............................
ページ5に含まれる内容の要旨
Safety information CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical connection. Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This prod
ページ6に含まれる内容の要旨
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. See the product User's Guide for additional safety information. SAVE THESE INSTRUCTIONS. Safety information 6
ページ7に含まれる内容の要旨
Learning about the printer Thank you for choosing this printer! We've worked hard to make sure it will meet your needs. To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site. We're committed to delivering performance and value with our printers, and we want to
ページ8に含まれる内容の要旨
What are you looking for? Find it here The latest supplemental information, updates, and technical Lexmark Support Web site— support: http://support.lexmark.com � Documentation Note: Select your region, and then select your product to view the appropriate support site. � Driver downloads Support telephone numbers and hours of operation for � Live chat support your region or country can be found on the Support Web � E ‑mail support site or on the printed warranty that came with your � Telephone s
ページ9に含まれる内容の要旨
5 1 4 3 2 1 Rear 300 mm (12 in.) 2 Right side 200 mm (8 in.) 3 Front 300 mm (12 in.) 4 Left side 12.7 mm (0.5 in.) 5 Top 300 mm (12 in.) Printer configurations Basic model The following illustration shows the printer front with its basic features or parts: Learning about the printer 9
ページ10に含まれる内容の要旨
1 Front door release button 2 Paper stop 3 Standard exit bin 4 Printer control panel 5 System board door 6 Standard 250 ‑sheet tray (Tray 1) 7 Multipurpose feeder door 8 Front door The following illustration shows the printer back with its basic features or parts: Learning about the printer 10
ページ11に含まれる内容の要旨
1 Rear door 2 Ethernet port Note: The Ethernet port is a feature on network models only. 3 USB port 4 Parallel port 5 Printer power cord socket 6 Power switch 7 Locking device port Learning about the printer 11
ページ12に含まれる内容の要旨
Configured models The following illustration shows the printer configured with an optional drawer: 1 Front door release button 2 Paper stop 3 Standard exit bin 4 Printer control panel 5 System board door 6 Standard 250 ‑sheet tray (Tray 1) 7 Optional 250 ‑ or 550 ‑sheet drawer (Tray 2) 8 Multipurpose feeder door 9 Front door Using the standard exit bin and paper stop The standard exit bin holds up to 150 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin includes a pap
ページ13に含まれる内容の要旨
To open the paper stop, pull it so it flips forward. Notes: � Do not leave the paper stop in the open position if you are printing on transparencies. Doing so may cause creases in the transparencies. � When moving the printer to another location, make sure the paper stop is closed. Learning about the printer 13
ページ14に含まれる内容の要旨
Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. You can customize your printer connectivity and memory capacity by adding o
ページ15に含まれる内容の要旨
1 Ethernet connector Note: The Ethernet port is a feature on network models only. 2 USB port 3 Parallel connector 4 Memory card connector 5 Optional card connector 6 Optional card connector Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to t
ページ16に含まれる内容の要旨
An optional memory card can be purchased separately and attached to the system board. To install the memory card: 1 Turn the printer off. 2 Access the system board. 3 Unpack the memory card. Note: Avoid touching the connection points along the edge of the card. 4 Align the memory card with its connector on the system board. 5 Push open the latches on both ends of the memory connector. Warning—Potential Damage: Memory cards are easily damaged by static electricity. Touch a grounded metal surface
ページ17に含まれる内容の要旨
It may require some force to fully seat the card. 7 Ensure that each latch fits over the notch on each end of the card. 8 Close the system board door. 9 Turn the printer back on. 10 Open the printers folder: a Click , or click Start and then click Run. b In the Start Search or Run box, type control printers. c Press Enter, or click OK. The printers folder opens. 11 Right ‑click your printer icon. 12 Click Properties. 13 Click Install Options. Note: Memory cards designed for other printers may no
ページ18に含まれる内容の要旨
Installing a flash memory or firmware card The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then
ページ19に含まれる内容の要旨
4 Push the card firmly into place. Notes: � The entire length of the connector on the card must touch and be flush against the system board. � Be careful not to damage the connectors. 5 Close the system board door. Installing hardware options Installing a 250 ‑ or 550 ‑sheet drawer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. Additional printer setup 19
ページ20に含まれる内容の要旨
An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. The printer supports one optional drawer; you can install a 250 ‑ or 550 ‑sheet drawer. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn
