ページ1に含まれる内容の要旨
FS-C5015N
FS-C5025N
FS-C5030N
Advanced Operation Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents 1 Handling Paper General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Selecting the Right Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Paper Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Loading Paper . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Contents ii ADVANCED OPERATION GUIDE
ページ5に含まれる内容の要旨
Introduction This guide has the following chapters: • 1 Handling Paper Explains how choose, handle and load paper. • 2 Using the Operator Panel Explains how to use the operator panel to configure the printer. •3 Options Shows the available options. • 4 Computer Interface Describes the possible connections between the printer and your computer. • Glossary A Glossary of terms used is provided here. ADVANCED OPERATION GUIDE iii
ページ6に含まれる内容の要旨
Introduction Conventions This manual uses the following conventions: Convention Description Example Italic Typeface Used to emphasize a key word, Close the top cover. phrase or message. In addition, Refer to Toner Container Replacement references to other publications on page 3-3. are displayed in italic typeface. Bracket Bold Text Used to emphasise the Press [Copy]. Typeface selection of a feature mode or key. Notes Used to provide additional or NOTE: For information about storing the usef
ページ7に含まれる内容の要旨
1 Handling Paper This chapter contains explanations on the following topics: • General Guidelines....................................................... 1-2 • Selecting the Right Paper............................................. 1-4 • Paper Type................................................................. 1-12 • Loading Paper............................................................ 1-13 ADVANCED OPERATION GUIDE 1-1
ページ8に含まれる内容の要旨
Handling Paper General Guidelines The machine is designed to print on standard copier paper (the type used in ordinary dry copier machines), but it can also accept a variety of other types of paper within the limits specified below. NOTE: The manufacturer assumes no liability for problems that occur when paper not satisfying these requirements is used. Selection of the right paper is important. Using the wrong paper can result in paper jams, curling, poor print quality, and paper waste, and
ページ9に含まれる内容の要旨
Handling Paper Item Specification Moisture content 4% to 6% Direction of grain Long grain Pulp content 80% or more Minimum and Maximum Paper Sizes The minimum and maximum paper sizes are as follows. For non standard paper, the MP tray must be used. Paper cassette MP tray Minimum Minimum Paper Size Paper Size 70mm 2-13/16 inches 148mm 5-13/16 inches Maximum Maximum Paper Size Paper Size 216mm 216mm 8-1/2 inches 8-1/2 inches Recommended Paper The following products are recommended for use wit
ページ10に含まれる内容の要旨
Handling Paper Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a surface as poss
ページ11に含まれる内容の要旨
Handling Paper Cassette or MP tray Size Size MP tray Youkei 2 114 × 162mm 16 kai 197mm × 273mm Youkei 4 105 × 235mm Custom Cassette: 148 to 216mm × 210 to 356mm (5-13/16 to 8-1/2 inches × 8-1/4 to 14 inches) MP tray: 70 to 216mm × 148 to 356mm (2-13/16 to 8-1/2 inches × 5-13/16 to 14 inches) Smoothness The paper should have a smooth, uncoated surface. Paper with a rough or sandy surface can cause voids in the printed output. Paper that is too smooth can cause multiple feeding and fogging
ページ12に含まれる内容の要旨
Handling Paper U. S. Bond Weight (lb) Europe Metric Weight (g/m²) 34 128 36 135 39 148 42 157 43 163 47 176 53 199 Thickness The paper used with the machine should be neither extremely thick nor extremely thin. If you are having problems with paper jams, multiple feeds, and faint printing, the paper you are using may be too thin. If you are having problems with paper jams and blurred printing the paper may be too thick. The correct thickness is 0.086 to 0.110mm (3.4 to 4.3 mils). Moisture C
ページ13に含まれる内容の要旨
Handling Paper grain paper can cause feeding problems in the machine. All paper used in the machine should be long grain. Other Paper Properties Porosity: Indicates the density of paper fiber. Stiffness: Limp paper may buckle in the machine, resulting in paper jams. Curl: Most paper naturally tends to curl one way if left unpacked. When paper passes through the fixing unit, it curls upward a little. To produce flat printouts, load the paper so that the upward pressure from the machine can c
ページ14に含まれる内容の要旨
Handling Paper Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper causes harm to the machine or operator. NOTE: Before purchasing any type of special paper, test a sample on the machine and check that printing quality is satisfactory. Transparency Transparencies must be able to withstand the he
ページ15に含まれる内容の要旨
Handling Paper Adhesive label paper must be entirely covered by its top sheet, with no spaces between the individual labels. Labels with spaces in between are liable to peel off, causing serious paper jam problems. Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the extra top sheet from the carrier sheet until after printing is finished. Acceptable Unacceptable Top sheet Carrier sheet The table below lists the specifications for adhesive lab
ページ16に含まれる内容の要旨
Handling Paper Envelopes Envelopes should be fed in the face-up position, right edge first. Since the composition of an envelope is more complex than that of ordinary paper, it is not always possible to ensure consistent printing quality over the entire envelope surface. Normally, envelopes have a diagonal grain direction. See Paper Grain on page 1-6. This direction can easily cause wrinkles and creases when envelopes pass through the printer. Before purchasing envelopes, make a test
ページ17に含まれる内容の要旨
Handling Paper Preprinted Paper Preprinted paper should satisfy the same conditions as white bond paper, refer to Paper Specifications, on page 1-2.The preprinted ink must be able to withstand the heat of fusing during the printing process, and must not be affected by silicone oil. Do not use paper with any kind of surface treatment, such as the type of paper commonly used for calendars. Recycled paper Select recycled paper that meets the same specifications as the white bond paper except
ページ18に含まれる内容の要旨
Handling Paper Paper Type The printer is capable of printing under the optimum setting for the type of paper being used. Setting the paper type for the paper source from the printer’s operator panel will cause the printer to automatically select the paper source and print in the mode best suited to that type of paper. A different paper type setting can be made for each paper source including the MP tray. Not only can preset paper types be selected, but it is also possible for you to defin
ページ19に含まれる内容の要旨
Handling Paper Loading Paper The following explains the procedure for loading paper in the cassette and the MP tray. Loading Paper into the Cassette Fan the media (paper/transparencies), then tap it on a level surface to 1 avoid media jams or skewed printing. Pull the paper cassette all the way out of the printer. 2 Paper Cassette Push the bottom plate down until it locks. 3 Bottom Plate ADVANCED OPERATION GUIDE 1-13
ページ20に含まれる内容の要旨
Handling Paper Standard paper sizes are marked on the inside of the paper cassette. Turn the paper size dial so that the size of the paper you are going to use 4 appears in the paper size window. Paper Size Dial Paper Size Window NOTE: When the paper size dial is set to OTHER the paper size must be set into the printer on the operator panel. See Setting the Cassette Paper Size on page 2-63. 1-14 ADVANCED OPERATION GUIDE
