ページ1に含まれる内容の要旨
MULTIMEDIA PRINTER
ENGLISH
GV-DT3
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the bottom of
cabinet. Retain this information for
INSTRUCTIONS
future reference.
Model No.
Serial No.
LYT0315-001A
ページ2に含まれる内容の要旨
2 Dear Customer, Thank you for purchasing this Multimedia Printer. SAFETY Before use, please read the safety information and precautions contained in the following pages to PRECAUTIONS ensure safe use of this product. Using This Instruction Manual CAUTION • All major sections and subsections are listed in the RISK OF ELECTRIC SHOCK DO NOT OPEN Table Of Contents (Z pg. 9). • Notes appear after most subsections. Be sure to read CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. these as wel
ページ3に含まれる内容の要旨
3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be SAFETY INSTRUCTIONS blocked or covered. • Do not block the openings by placing the product on a Electrical energy can perform many useful functions. But bed, sofa, rug or other similar surface. improper use can result in potential electrical shock or fire • Do not place the product in a built-
ページ4に含まれる内容の要旨
4 USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a • Do not place this product on an unstable cart, stand, marked change in performance and you are unable to tripod, bracket or table. It may fall, causing serious injury restore normal operation by following the detailed to a child or adult, and serious damage to the product. procedure in its operating instructions, do not attempt to • Use only with a cart, stand, tripod,
ページ5に含まれる内容の要旨
CAUTIONS 5 If you notice smoke or a peculiar smell coming from ABOUT THERMAL HEADS the printer, shut it down and unplug it •The thermal heads, necessary for printing, are located IMMEDIATELY. Use of the within the unit. The heads can become extremely printer under these warm. To prevent possible burns and injuries, do not conditions could lead to fire touch the thermal heads. or electric shock. Contact •When the printer is used for extended periods, the your JVC dealer. DO NOT thermal heads expe
ページ6に含まれる内容の要旨
MAJOR FEATURES 6 EXACT FRAME FUNCTION You can choose the exact image you want from 54 frames shown in the index window, perfect for when you miss the right moment to press the MEMORY button. PICTURE PROCESSOR FUNCTION A built-in image processor offers a variety of special effects such as Auto Picture Adjustment, Clear Black, Back-Lit Compensation, B/W and Sepia. Manual adjustment is also possible. PICTURE MEMORY FUNCTION Store your favorite images in the printer’s memory for repeated printing, e
ページ7に含まれる内容の要旨
7 A Variety of Special Effects Printing Optionss This printer allows you to print text or images on standard paper, seal paper or transparent film in any of one of several formats. STORED TITLE IMPOSE (Z page 31) Print with titles. STORED FRAME IMPOSE (Z page 32) Print with frames.
ページ8に含まれる内容の要旨
MAJOR FEATURES (cont.) 8 MULTI-PRINT OF SAME IMAGE MULTI-PRINT OF DIFFERENT (Z page 24) IMAGES (Z page 25) Print 2, 4 or 16 different images on Print 2, 4 or 16 of the same image on one sheet. one sheet. CALENDAR PRINT STROBE PRINT (Z page 26) (Z page 27) Print at set intervals, as when taking snapshots in rapid succession. OCT. 1999 SUN MON TUE WED THU FRI SAT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 TRIMMING PRINT (Z page 28) ROTAT
ページ9に含まれる内容の要旨
CONTENTS 9 MAJOR FEATURES 6 CONTROLS, INDICATORS AND CONNECTORS 10 PREPARATION 12 INSTALLATION OF INK CASSETTE 14 LOADING THE PAPER TRAY 15 HOW TO MAKE CONNECTIONS (CABLE CONNECTION) 16 HOW TO MAKE CONNECTIONS [IrDA (IrTran-P) RECEPTION] 17 PRINTING FROM A DIGITAL CAMCORDER/S-VHS VCR (CABLE CONNECTION) 18 PRINTING FROM A DIGITAL STILL CAMERA [IrDA (IrTran-P) RECEPTION] 20 DIFFERENT TYPES OF PRINTING 22 CONVENIENT FUNCTIONS 33 TROUBLESHOOTING 39 SPECIFICATIONS 46 INDEX 47 FOR SERVICING 48 WARRANT
ページ10に含まれる内容の要旨
CONTROLS, INDICATORS AND CONNECTORS 10 Front View 1 e 2 3 6 r 4 5 t Rear View y u 1 IrDA (IrTran-P) sensor 0 DV lamp • Receives video data through the IrDA • Lights when a source unit’s DV output is (IrTran-P) communication system. connected to the DV IN connector using the provided DV cable and the DV 2 VIDEO INPUT connector mode is selected. • Connect to the source unit’s normal video output using the provided video ! IrDA (IrTran-P) lamp cable. • Lights when receiving video data through the I
ページ11に含まれる内容の要旨
11 POWER 7 EXACT PICTURE FRAME PROCESSOR % 8 0 ! @ # $ 9 MENU OK ^ DV IrDA (IrTran-P) VIDEO PC EXACT FRAME INPUT SOURCE/ MEMORY PRINT STORED IMAGE SELECT & FRAME STABILIZER * ( ) q w ^ MENU button r Service Door for Jammed Paper Removal • Press to access the MENU screen. • Open this door when paper is jammed. * Do not open this door unless paper is & Cursor buttons jammed. Be sure to close this after • Use to make selections during menu clearing the paper jam. operation. * INPUT SELECT button t
ページ12に含まれる内容の要旨
PREPARATION 12 c Before printing, make sure everything is set up and ready. 1 Have a Color Print Paper Sheet Set ready (page 13). 2 Install the ink cassette in the printer (page 14). 3 Place the color print paper sheets in the paper tray and load the tray (page 15). c Use the print sheets and ink cassette from the same kit. 4 Connect an image source to the printer (page 16). 5 Plug the printer’s power cable into an AC outlet and press the POWER button. c Power com
ページ13に含まれる内容の要旨
13 About Color Print Paper Sheet Sets (optional) You must use one of the sets shown in the following chart: SET CONTENTS USES PV-50SFAU • Standard Print Paper (50 Sheets) Print your favorite images, just like (Standard type) • Ink Cassette (50 Prints) snapshots. PV-25SFSAU • Sticker Print Paper (25 Sheets) Make customized seals and stick (Sticker type) • Ink Cassette (25 Prints) them on greeting cards, envelopes, letters, etc. PV-25UFAU • Super-Fine High Grade Paper Make customized picture postc
ページ14に含まれる内容の要旨
INSTALLATION OF INK CASSETTE 14 Install the ink cassette included with the optionally available color print paper sheet set. OPEN CASSETTE DOOR 1 Pull the right top of the door in the direction indicated by the arrow to open it. TAKE UP SLACK 2 Turn the roller on the side with the mark in the direction of the arrow. mark A Do not turn the part marked with . INSTALL INK CASSETTE 3 Insert the cassette label-side up from the end marked. Push it until you hear a click. A CLOSE CASSETTE DOOR 4 Push
ページ15に含まれる内容の要旨
LOADING THE PAPER TRAY 15 A Opening the paper tray c Open the lid while pushing . A Inserting color print paper sheets in the paper tray To printer With Standard/Sticker Print Paper Detection marks 1. Keep the partition panel upright. If it is down or tilted, push it back to the upright position. 2. Load print sheets in the tray, placing the sides with the detection marks or printing toward the printer face down. •The tray can hold up to 25 sheets at one Printing side time. Partition panel With
ページ16に含まれる内容の要旨
HOW TO MAKE CONNECTIONS (CABLE CONNECTION) 16 WHEN PRINTING FROM A DIGITAL CAMCORDER WITH A DV CONNECTOR OR A VCR WITH AN S-VIDEO OUTPUT CONNECTOR Make sure that you have easy access to the AC outlet which the printer is plugged into so that it can be immediately unplugged in case of emergency. Connect the printer power plug to a different AC outlet from the TV and VCR. Printer Rear Connect to Connect to connectors video input video output connector connector Video cable (provided) Front TV (set
ページ17に含まれる内容の要旨
HOW TO MAKE CONNECTIONS [IrDA (IrTran-P) RECEPTION] 17 WHEN PRINTING FROM AN IrTran-P COMPATIBLE DIGITAL STILL CAMERA IrTran-P compatible digital still camera Approx. 15& Approx. 15& Within a distance of approximately 19” Data communications may not be possible between some units when they are too close or too distant. IrTran-P (Infrared Transfer Picture): An infrared video data communications format which enables infrared IrDA (IrTran-P) communications of video data between sensor compatible un
ページ18に含まれる内容の要旨
PRINTING FROM A DIGITAL CAMCORDER/S-VHS VCR (CABLE CONNECTION) 18 This section explains how to print a single image from a digital camcorder or an S-VHS VCR con- nected to the printer via a cable. Preparation See page 12. PRESS INPUT SELECT TO SELECT INPUT DV 1 MODE •Press INPUT SELECT to select the appropriate input mode depending on the connector being used, referring to the indication shown on the TV screen or the relevant lamps on the printer. (See Input Mode Selection below.) When using the
ページ19に含まれる内容の要旨
19 BEGIN SOURCE PLAYBACK 2 1PRESS MEMORY WHEN THE 3 DESIRED IMAGE APPEARS •If the image is unstable, press MEMORY again. 2 PRESS OK •If the PRINT lamp does not blink, the video data has not been properly input to the printer. Make sure you have a proper connection and try again. PRESS PRINT TO START PRINTING 4 If you want to try to stabilize the stored image again ... press MEMORY again. If you store the wrong image or an image incorrectly ... press SOURCE/STORED IMAGE to call up the INPUT displ
ページ20に含まれる内容の要旨
PRINTING FROM A DIGITAL STILL CAMERA [IrDA (IrTran-P) RECEPTION] 20 This section explains how to print an image transmitted from an IrDA (IrTran-P) compatible digital still camera using infrared communication. Preparation See page 12. When using a digital still camera compatible with IrTran-P, refer also to the instruction manual provided with the IrDA camera. (INFRARED) PRESS INPUT SELECT TO SELECT IrDA 1 MODE •If you select IrDA (INFRARED) when a source unit is connected to the printer’s VIDEO
