ページ1に含まれる内容の要旨
DisplayMaker Legacy 72SI, 98SI
User Guide
Part Number 0700048
1
ページ2に含まれる内容の要旨
Legal notices © Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Printed in the US For additional technical support and
ページ3に含まれる内容の要旨
Revision Log The following is a list of major changes and additions that have been made to this manual since it was first released. See the accompanying Release Notes for specific changes to the software and hardware between manual updates. Revision Description Revision B Chapter 2: Updated Ready screen image. Menu items added: Clean Grit Rollers, Capping Purge, Printer Name, Localization, Print Menu Tree. Menu tree updated. Chapter 3: Added Fine Text mode. Added Media Feed Number prompts
ページ4に含まれる内容の要旨
Regulatory Statements FCC-A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference when the equipment is oper- ated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to r
ページ5に含まれる内容の要旨
Telecommunications The ColorSpan VideoNet port on this device is not intended to be connected to a public telecommunications network. Connec- Network Statement tion of this device to a public telecommunications network in a European Community Member State will be in violation of national law implementing Directive 91/263/EEC on the approx- imation of laws of the Member States concerning telecommuni- cation terminal equipment, including the mutual recognition of their conformity. Der VideoNet
ページ6に含まれる内容の要旨
About This Manual This manual contains the following topics: Chapter 1, Getting Started, shows you how to unpack and assemble the printer, and introduces you to its main fea- tures. Chapter 2, Using the Control Panel, shows you how to use the control panel to specify printer options. Chapter 3, Ink and Media, shows you how to install ink and media. Chapter 4, Calibrating the Printer, shows you how to cali- brate the printer for optimal print quality. Chapter 5, Maintaining the Print
ページ7に含まれる内容の要旨
Conventions This manual uses the following informational conventions: Note A special technique or information that may help you perform a task or understand a process. Hinweis Ein Hinweis beschreibt eine spezielle technik zur Lösung einer Aufgabe oder enthällt Informationen, die Ihnen eine Prozedur näher erläutert. Caution Alerts you to something that has the potential to cause damage to hardware, software, or data. Vorsicht Dieses Feld weist auf einen Umstand hin, der einen Hardware-oder
ページ8に含まれる内容の要旨
viii
ページ9に含まれる内容の要旨
TABLE OF CONTENTS Revision Log..............................................................................................iii Regulatory Statements.............................................................................. iv FCC-A .................................................................................................... iv DOC (Canada)...................................................................................... iv Telecommunications Network Statement.....................
ページ10に含まれる内容の要旨
Printer Settings................................................................................. 2-10 Maintenance .................................................................................... 2-14 Service Printer .................................................................................. 2-15 User Diagnostics .............................................................................. 2-15 Warnings & Actions .......................................................................
ページ11に含まれる内容の要旨
Media Properties.......................................................................... 3-41 Printer Setup ................................................................................ 3-42 Media Wizard ...................................................................................... 3-44 Setting Heater Temperatures............................................................... 3-47 Calibrating the Printer When to Calibrate..............................................................
ページ12に含まれる内容の要旨
Setting the Camera Height .............................................................. 5-15 Calibrate the Service Station ............................................................... 5-17 Replace Ink Filters ................................................................................ 5-19 Extended Power Down and Restart..................................................... 5-21 Power Down .................................................................................... 5-21 Restart ..
ページ13に含まれる内容の要旨
CHAPTER 1 Getting Started This chapter shows you how to get started using your printer. It includes these topics: Operating Requirements (page 1-2) Unpacking and Assembly (page 1-7) Workflow Overview (page 1-8) Parts Overview (page 1-10) Special Features (page 1-15) Getting Started 1-1
ページ14に含まれる内容の要旨
Operating Choose a location for the printer before you unpack it. Keep the following requirements in mind: Requirements Electrical Use the supplied power cord. Plug it directly into a grounded electrical outlet. Do not lengthen the power cord with an extension cord; the resulting voltage drop could damage the printer. Make sure the line voltage meets the requirements: 220 VAC ±10%, single phase, 20 Amps, with NEMA L6-20R locking wall receptacle (North America and Japan), or 16 Amps wit
ページ15に含まれる内容の要旨
Connection kits are available from MacDermid ColorSpan to vent VOC emissions to the customer’s exhaust system or VOC recovery equipment. Consult your MacDermid ColorSpan reseller for details. Store media and ink in an area with similar temperature and humidity conditions as the printer. Locate the printer close enough to the print server (RIP) so that they can be connected with the required cable. Locate the printer on a flat, level floor. Locate the printer where its normal operati
ページ16に含まれる内容の要旨
To cap the printheads, use only SolaChrome Printhead Cap- ping Film. Damage to printheads resulting from the use of poorly performing plastic films is not covered by the printer warranty. The maximum diameter allowed on the takeup spool is 7.5 inches (190.5 mm) on a 3-inch core. When the takeup spool has a diameter of 6.5-7.5 inches (165.0-190.5 mm), the con- trol panel displays a warning about possible print quality issues. The media supply may be wound either printed-side-out or pr
ページ17に含まれる内容の要旨
ink. If ink does get onto the pinch rollers, clean them with SolaChrome-HR Cleaning Solvent and dry them thoroughly before printing. DO NOT set heavy objects on the power cord or printer cable; do not bend the cables or force them into contorted positions. DO NOT place heavy objects anywhere on the printer. DO NOT lean on or place objects on the optional auxiliary dryer, if installed. Safety Warnings WARNING WITH THE POWER SWITCH IN THE OFF POSITION, POWER MAY STILL BE SUPPLIED TO TH
ページ18に含まれる内容の要旨
WARNING THE PRINTER ELECTRONICS ASSEMBLY CONTAINS A LITH- IUM BATTERY DEVICE. THERE IS A DANGER OF EXPLOSION IF THE BATTERY IS INCORRECTLY REPLACED. The battery must be replaced only by ColorSpan authorized personnel, and must be replaced only with the same or equivalent type. Dispose of this lithium battery device in accordance with local, state (or province), and Federal (or country) solid waste requirements. WARNUNG DIE ELEKTRONIK DES DRUCKERS ENTHÄLT EINE LITHIUM BATTERIE. ES BESTEHT
ページ19に含まれる内容の要旨
Unpacking and This printer must be unpacked and installed only by a MacDermid ColorSpan Authorized Service Provider (ASP). If you Assembly need to relocate, ship, or store an installed printer, contact your reseller or MacDermid ColorSpan Technical Services for assis- tance. Caution To avoid damaging the carriage bearings when mov- ing the printer, move the carriage away from the rail by reinstalling the shipping blocks. This is recom- mended even if moving the printer down the hall or betw
ページ20に含まれる内容の要旨
Workflow Overview Power Up the Printer 1. Turn on the power switch to observe the typical power-up sequence. 2. The control panel backlight illuminates. Move the contrast lever (located to the right of the control panel screen) up and down until the control panel graphics and messages are eas- ily visible. 3. The printer runs a series of self-tests, and reports any errors it finds. 4. The printhead carriage moves to the service station. 5. The control panel prompts you to load media. 6. You
