ページ1に含まれる内容の要旨
NOT FOR NEW
DESIGN
24V, 2" HIGH SPEED THERMAL PRINTER
FTP-627 Series
n OVERVIEW
The FTP-627 MCL Series consists of 24V drive ultra compact
printers with 2 inch paper widths (58mm), which can print at
high speed. Paper can be easily set by an unique platen
release mechanism.
The FTP-627 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, and measurement and medical
equipment.
n HIGHLIGHTS
• Ultra compact
Height 15.5 mm,
ページ2に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n PART NUMBERS Ir tem PartNumbe FTP-627MCL001(frontpaperinsertionwithoutheadopendetectionswitch FTP-627MCL002(bottompaperinsertionwithoutheadopendetectionswitch Printermechanism FTP-627MCL003(frontpaperinsertionwithheadopendetectionswitchandknob) FTP-627MCL004(bottompaperinsertionwithheadopendetectionswitch) FTP-627MCL303#01MCL003withfullcutcutter Mechanismwithcutter FTP-627MCL303#02MCL003withpartialcutcutter L1SIfordrivingFTP-627CU10 FTP-627DSL011(RS232Cseri
ページ3に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n SPECIFICATIONS In tem Specificatio Interface ConformstoRS232C/Centronics 24VDC±5%averagecurrent,currentapprox.1.1A(25˚C, Forprinthead Rav=1500)24V,simultaneouslyON,64dots) Power Fmormotorofprinter24VDC±5%,1Amaximu supply Fm ormotorofcutter24VDC±5%,1Amaximu Fm orlogic5VDC±5%,0.2Amaximu Printermechanism83.5x35.7x15.5mm(WxDxH),MCL003(leverexcluded) Mechanismwithcutter83.5x43.0x26.4mm(WxDxH),(screwsandcablesareexcluded) Dimensions Imnterfaceboard131x89x24m Pri
ページ4に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n FUNCTION Im tem Ite 1n.T. estprintfunctio 8nCutterabnormalitydetectio 2n.P. aperoutdetectio 9nMotorpowersavingfunctio 3n.P. apernearenddetectio 1n0Markdetectionfunctio 4n.H. eadupdetectio 1n1MCUoperationabnormalitydetectio Thermalheadtemperatureabnormality 5. 1n2.PowerON/OFFsequenceprotectio detection 6n.B. low-outfusedetectio 1n3Motorover-currentprotectio 7n .H. eadvoltageabnormalitydetectio 1r4Hardwaretime n DIMENSIONS 1. Printer mechanism Unit: mm 4
ページ5に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series 2. Interface board 130.8 83.8 55.9 4 - ø 3.6±0.1 6.4 CN10 CN11* CN8 CN1 CN2 CN5** 5.1 30.5 91.4 5.1 120.7 Part mounting side Part solder side * CN11 used ** CN5 used for paper near end detection Unit: mm 5 88.9 78.7 39.4 5.1 39.4
ページ6に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n PRINTER CONNECTOR (CN8) (FLEXIBLE PT BOARD) PIN ARRAYS Control circuit side connector: 52030-3010 Molex or equivalent product No. Signal I/O Contents No. Signal I/O Contents 1 PHK — Photo interrupter (cathode) 2 VSEN I Power supply for paper sensor 3 PHE O Photo interrupter (emitter) 4VH I Head driving power supply 5VH I Head driving power supply 6 GNC — Ground for head 7 GND — Ground for head 8 DIN I Data input 9 LAT I Data latch 10 CLK I Clock 11 STB6 I E
ページ7に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n INTERFACE 1. Centronics interface (1) Connector (CN1) Connector part number : FCN-605Q030-G/S (Fujitsu Components) or equivalent Mating connector part number : FCN-607B030-G/D (Fujitsu Components) or equivalent (2) Connector pin assignment No. Signal I/O Contents No. Signal I/O Contents 1 PRSTB I Data strobe 2 PRSTB-RET — Connected to logic GND 3 PRDT0 I Data 0 4 PRDT0-RET — Connected to logic GND 5 PRDT1 I Data 1 6 PRDT1-RET — Connected to logic GND 7 PRDT
ページ8に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series (5) Printer status signals E1 rror status R2INF R3 INF RINF 1t.Pw aperou Lho Hw ig Lo 2d.Ph apernearen Hhig Hw ig Lo 3p.Hh eadu Hwig Lw o Lo 4y .Hh eadtemperatureabnormalit Hwig Lh o Hig 5y .Hw eadvoltageabnormalit Lho Hh ig Hig 6y .Hh ardwareabnormalit Hhig Hh ig Hig 7y .Mw arkdetectionabnormalit Lwo Lw o Lo 8l.Nw orma Lwo Lh o Hig 2. RS-232C (1) Connector (CN2) Connector part number : B6B-XH-A (J.S.T.) or equivalent Mating connector part number : XHP-6 (J.S
ページ9に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n CONNECTOR PIN ASSIGNMENT 1. Connector for power supply (CN10) Part number : B6B-VH White (J.S.T) or equivalent (board side) Mating connector part number: VHR-6 (J.S.T.) or equivalent 2. Connector for printer mechanism connection (CN8) Part number : 52030-3010 (made by Molex) or equivalent (board side) No. Signal I/O Contents No. Signal I/O Contents 1 PHK — Photo interrupter (cathode) 2 VSEN O Power supply for paper senor 3 PHE I Photo interrupter (emi
ページ10に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n OPTIONS Nr ame P)artNumbeLength(mm InterfaceCable F1 orCentronics(CN1)F0TP-622Y2050 (betweenboardand equipment) F1 orRS232C(CN2)F0TP-622Y3030 P1 owersupplycable(CN10) F0TP-622Y4030 N- earendpapersensor(CN5)ifrequiredFTP 10
ページ11に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series n COMMANDS Command Contents HT Moves print position to the next tab. LF Line feed. FF Feeds forms (new page). ECS RS Sets reverse printing. ESC US Resets reverse printing. ESC ! + n Sets print mode. ESC %+n Download character set specification//cancellation. ESC &+y+c1+c2+x+d1~dN Download character definition. ESC *+m+n1+n2+d1~dN Sets bit image mode. ESC ?+n External registration character deletion. ESC 2 Sets 1/6 inch line feed length
ページ12に含まれる内容の要旨
NOT FOR NEW DESIGN FTP-627MCL Series Commands continued Command Contents FS C+n Kanji code system selection. FS W+n Kanji double height and width mode specification/cancellation. GS < Line feeds to the next mark. GS A+m+n Sets the line feed length after mark detection. GS E+n Sets print quality. GS V+n+m Paper cutting. GS e+n+m Sets bar code width. GS h+n Sets bar code height. GS k+m+n+d1~dN Selects bar code type and prints. GS w+n Sets bar code width magnification. FS *+
