ページ1に含まれる内容の要旨
EPSON Stylus Color 777/777i
Paper name Size Part number
paper support
sheet
feeder
EPSON Photo Paper Letter S041141
A4 S041140
printer cover
left edge
4 × 6 inches S041134
guide
Panoramic S041145
EPSON Ink Jet Transparencies Letter S041064
A4 S041063
EPSON Photo Quality Ink Jet A6 S041054
output tray
Cards
output tray EPSON Premium Glossy Photo Letter S041147
Paper
extension
EPSON Glossy Photo Greeting Letter S041267
Card Kit
ink cartridge clamps
®
EPSON Photo Stickers Kit A6, 16 frames per S0
ページ2に含まれる内容の要旨
EPSON Stylus Color 777/777i Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Plain bond paper and special ink jet 0.003 to 0.004 inch 17 to 24 lb 2 Legal (8.5 × 14 inches) papers distributed by EPSON (0.08 to 0.11 mm) (64 to 90 g/m ) Half letter (statement, 5.5 × 8.5 inches) for plain bond for plain bond Executive (7.5 × 10 inches) paper paper A4 (210 × 297 mm) A5 (148 × 210 mm) Transparencies, glossy Letter (8.5 × 11 inches) Transparencies, glossy pap
ページ3に含まれる内容の要旨
EPSON Stylus Color 777/777i . Mechanical A EPSON 4 × 6-inch Paper feed Friction Photo Paper * (dotted lines indicate method perforations) L & R Paper path Sheet feeder, rear entry Sheet feeder 2 capacity 100 sheets of 17 lb (64 g/m ) paper Dimensions Storage Width: 17.7 inches (450 mm) C Depth: 10.1 inches (257 mm) Height: 6.8 inches (173 mm) A: The maximum top margin is 0.67 inch (17.0 mm). Printing Width: 17.7 inches (450 mm) L & R: The maximum left and right margin is 0.24 inch (6.1 mm).
ページ4に含まれる内容の要旨
EPSON Stylus Color 777/777i Control Panel Installing Ink Cartridges for the First Time You can diagnose some problems by checking the printer’s control panel lights, as described below, or running a printer Follow these ink cartridge precautions and the others in your check, as described on page 4. Printer Basics book: Use the cartridges packed with your printer the first error light power light time you install ink cartridges or your printer won’t charge properly. pow
ページ5に含まれる内容の要旨
EPSON Stylus Color 777/777i 4. Unwrap the ink cartridges, then remove only the yellow Testing the Printer part of the tape seal on top. Don’t pull off the blue part. You can run a printer check to determine whether a problem comes from the printer itself or some other source. 1. Make sure both the printer and computer are turned off. 2. Disconnect the interface cable from the printer. 3. Make sure letter-size or larger paper is loaded in the printer. 4. Hold down the b maintenance but
ページ6に含まれる内容の要旨
EPSON Stylus Color 777/777i ❏ You can load the following number of sheets of EPSON Additional Media Loading Guidelines special media: Don’t use the cleaning sheets that may be included with your special media; they may damage the printer. Load this number of For this paper name... sheets EPSON 360 dpi Ink Jet Paper Up to the arrow mark on ❏ Always handle sheets by the edges, and don’t touch the EPSON High Quality Ink Jet Paper the inside of the left edge printable surface. EPSON Photo
ページ7に含まれる内容の要旨
EPSON Stylus Color 777/777i Before you replace a cartridge, be sure to read these sections Removing and Installing Ink Cartridges below: Be sure you have a new ink cartridge before you begin. Once ❏ “Ink Cartridge Precautions” below you start the ink cartridge replacement procedure, you must complete all the steps in one session. ❏ “Determining Which Cartridge to Replace” Follow these steps to replace ink cartridges: Ink Cartridge Precautions 1. Make sure the printer is turned on a
ページ8に含まれる内容の要旨
EPSON Stylus Color 777/777i 6. Tilt the new cartridge forward slightly as you place it in its Cleaning the Print Head holder. If your printouts are unexpectedly light or faint, or dots or lines are missing from the image, you may need to clean the print head. This unclogs the nozzles so they can deliver ink properly. Print head cleaning uses ink, so clean it only if quality declines. This section explains how to clean the print head using the Head Cleaning utility, which is th
ページ9に含まれる内容の要旨
EPSON Stylus Color 777/777i 7. If the nozzle check pattern has no gaps in its dots, click 4. You see the Utility menu. Click the Print Head Finish. Alignment button. If the pattern is missing dots, click Clean to clean the print 5. Follow the instructions on the screen to print a test page. head again. If you don’t see any improvement after cleaning You see this window: three or four times, check the solutions in the Printer Basics book. You can also turn the printer off and wait overnight—
ページ10に含まれる内容の要旨
EPSON Stylus Color 777/777i Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Follow these steps: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2
