ページ1に含まれる内容の要旨
TM-U220 Printers
User’s Manual / Bedienungsanleitung
Gebruikershandleiding / Manuel d’utilisation
Manual do utilizador / Manual del usuario
Manuale dell’utente
404312200
ページ2に含まれる内容の要旨
A Type B Type D Type A 1 3 2 4 B C ii
ページ3に含まれる内容の要旨
DE F G G-a H iii
ページ4に含まれる内容の要旨
IJ KL MN iv
ページ5に含まれる内容の要旨
O P v
ページ6に含まれる内容の要旨
DIP Switch Tables Look at the numbers and letters in the area indicated in the illustration. If the last letters are “US”, use the “US” tables below. If the last letters are “STD”, use the “STD” tables. CAUTION: Be sure to replace the DIP switch cover before using the printer. US Parallel (DIP Switch 1) Serial (DIP Switch 1) SW Function On Off SW Function On Off 1 Auto line feed Enabled Disabled 1 Data receive error Ignored Prints “?” 2 Receive buffer 40 bytes 4 KB 2 Receive buffer capacity
ページ7に含まれる内容の要旨
STD Parallel (DIP Switch 1) Serial (DIP Switch 1) SW Function On Off SW Function On Off 1 Auto line feed Enabled Disabled 1 Data receive error Ignored Prints “?” 2 Receive buffer capacity 40 bytes 4 KB 2 Receive buffer capacity 40 bytes 4 KB 3~7 Undefined - - 3 Handshaking XON/XOFF DTR/DSR 4 Word length 7 bits 8 bits 8 BUSY condition Receive Receive buffer full buffer full or 5Parity check Yes No Offline 6 Parity selection Even Odd Parallel (DIP Switch 2) 7 Transmission speed 4800 bps 9600 b
ページ8に含まれる内容の要旨
TM-U220 Specifications Print method 9-pin serial impact dot matrix method Print font Font (standard) Font A: 7 × 9, Font B: 9 × 9 Column capacity 7 × 9/9 × 9: (columns) 76 mm: 40/33 69.5 mm: 36/30 57.5 mm: 30/25 Character size (W × H) 1.2 × 3.1 mm/1.6 × 3.1 mm (not including horizontal (standard) spacing) Character set 95 Alphanumeric, 37 International,128 × 12 Graphic Characters per inch Font A (7 × 9): 16 cpi, Font B (9 × 9): 13.3 cpi (standard) (3 half dot spacing) Paper Dimensions (mm) 57
ページ9に含まれる内容の要旨
English TM-U220 Printers User’s Manual DIP Switches and Specifications The technical specifications and the information about the DIP switches are at the beginning of this manual. Illustrations All of the illustrations are at the beginning of this manual. They are identified by letters (A, B, C . . .). In the text the illustrations are referred to by these letters. (“See illustration A,” for example.) Some of these illustrations have numbered arrows or lines pointing to parts of the illustrat
ページ10に含まれる内容の要旨
English EMC and Safety Standards Applied Product Name: TM-U220A/TM-U220B/ CE Marking TM-U220D The printer conforms to the following Directives Model Name: M188A/M188B/M188D and Norms: The following standards are applied only to the Directive 89/336/EEC EN 55022 Class B printers that are so labeled. (EMC is tested using EN 55024 the EPSON power supplies.) IEC 61000-4-2 Europe: CE marking IEC 61000-4-3 Safety: TÜV (EN 60950) IEC 61000-4-4 North America: EMI: FCC/ICES-003 Class A IEC 61000-4-5 I
ページ11に含まれる内容の要旨
English Safety Precautions WARNING: Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous. Never disassemble or modify this product. Tampering with this product may result in injury or fire. Be sure to use the specified power source. Conn
ページ12に含まれる内容の要旨
English Notes on Usage ❏ Do not open the cover during printing or when the autocutter is being operated. ❏ Do not install the printer in a dusty place. ❏ Protect the printer from impact. ❏ Cords or other foreign objects must not be caught on the printer. ❏ Do not apply excessive force to the printer case. ❏ Do not place food or beverages such as coffee on the case of the printer. Notes on Installation ❏ When using the printer, be sure that the printer is installed horizontally. ❏ If you are u
ページ13に含まれる内容の要旨
English Illustrations Because this manual covers three types of the TM-U220, some of the illustrations may be slightly different from your printer; however, the instructions cover all types, except as noted. Unpacking The following items are included for the standard specification printer. If any item is damaged, contact your dealer. ❏ Printer ❏ Roll paper ❏ Exclusive ribbon cassette [ERC-38(P)/ERC-38(B/R)] ❏ AC adapter (May not be included with the printer.) Control Panel (LEDs and Buttons)
ページ14に含まれる内容の要旨
English Power Supply Switch and Power Supply Switch Cover The power supply switch is on the front of the printer. Press the power supply switch to turn on the printer. Power Supply Switch Cover You can use the enclosed power supply switch cover to make sure that the power supply switch is not accidentally pressed. Just press the cover into place to install it. If you need to turn the power supply switch on or off with the cover attached, you can insert a thin tool into one of the holes in t
ページ15に含まれる内容の要旨
English 4. Again turn the ribbon cassette’s knob 2 or 3 times in the direction of the arrow and close the ribbon cassette cover. CAUTION: Be careful not to touch the print head with your fingers when turning the ribbon cassette knob because the print head is hot and you might be burned. When you replace the ribbon casette, lift the left side of the ribbon cassette first; then lift the whole ribbon cassette. Inserting Roll Paper CAUTION: Be sure to use roll paper that meets the specifications
ページ16に含まれる内容の要旨
English 11. Close the roll paper cover and tear off the roll paper with the manual cutter, as shown in illustration O. Note: Do not open the roll paper cover during printing or paper feeding. When using the printer, be sure to cut the roll paper with the manual cutter after paper feeding is complete. Replacing Roll Paper 1. Open the roll paper cover by using the tab, as shown in illustration H. 2. Types B and D: Remove the used roll paper core. 3. Type A only: Remove the take-up spool, and ope
ページ17に含まれる内容の要旨
English Returning the autocutter blade to the normal position 1. Open the roll paper cover by using the tab, as shown in illustration H. 2. Use a ballpoint pen or tweezers to turn the knob of the autocutter in the direction indicated by the arrow until you see a round shaft in the hole, as shown in illustration P. Removing jammed paper CAUTION: The print head becomes very hot during printing. Allow it to cool before you reach into the printer. 1. Open the roll paper cover by using the tab,
ページ18に含まれる内容の要旨
English 10 TM-U220 User’s Manual
