ページ1に含まれる内容の要旨
User's Manual
Model : iDP-460
Dot Matrix Printer
Rev.1.00 Newly issued on Feb. 26. 1998
Japan CBM Corporation
Information Systems Div.
CITIZEN
ページ2に含まれる内容の要旨
iDP-460 User’s Manual Declaration of Conformity Manufacturer’s Name : : Japan CBM Corporation Manufacturer’s Address : 1-1-7, Okubo, Shinjuku-ku, Tokyo 169-8553, Japan Declare the Product Product Name Dot Matrix Printer Model Number(s) iDP460 (iDP460P, iDP460R, iDP460V) (S.NO.9830001 - ) Conform to the following Standards LVD : EN60950 : 1992+A1+A2+A3+A4 EMC : EN55022 : 1994 Class A : EN61000-3-2 : 1995 : EN50082-1 : 1992 : IEC801-2 : 1991 4KV CD, 8KV AD : IEC801-3 : 1984 3V/m, 27MHz-500MHz :
ページ3に含まれる内容の要旨
iDP-460 User’s Manual IMPORTANT SAFETY INSTRUCTIONS •Read all of these instructions and save them for future reference. •Follow all warnings and instructions marked on the product. •Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. •Do not use this product near water. •Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. •Slots and openings on t
ページ4に含まれる内容の要旨
iDP-460 User’s Manual WICHTIGE SICHERHEITSANWEISUNGEN •Lesen Sie die nachfolgenden Anweisungen sorgfältig durch und bewahren Sie sie auf. •Befolgen Sie alle auf dem Drucker vermerkten Hinweise und Anweisungen. Vor dem Reinigen grundsätzlich Stecker aus der Steckdose ziehen. Keine Flüssigkeiten oder Aerosolreiniger benutzen. Nut mit einem feuchten Tuch abwischen. •Der Drucker darf nicht in der Nähe von Wasser aufgestellt werden. •Drucker nicht auf einem unstabilen Wagen, Stand oder Tisch aufs
ページ5に含まれる内容の要旨
iDP-460 User’s Manual IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this
ページ6に含まれる内容の要旨
iDP-460 User’s Manual 1. Prior to using the equipment, be sure to read this User's Manual thoroughly. Please keep it handy for reference whenever it may be needed. 2. The information contained herein may be changed without prior notice. 3. Reproduction of part or all of this User's Manual without permission is strictly prohibited. 4. Never service, disassemble, or repair parts that are not mentioned in this User's Manual. 5. Note that we will not be responsible for damages attributa
ページ7に含まれる内容の要旨
iDP-460 User’s Manual SAFETY PRECAUTIONS ----- BE SURE TO OBSERVE In order to prevent hazards to an operator or other persons and damage to property, be sure to observe the following precautions. • The following describes the degrees of hazard and damages that can occur if the given instructions are neglected or the equipment is incorrectly operated. WARNING Negligence of this precaution may result in death or serious injury. CAUTION Negligence of this precaution may result in injury or damage
ページ8に含まれる内容の要旨
iDP-460 User’s Manual WARNING • Never handle the equipment in the following manners, as it may break, become out of order, or overheat causing smoke and resulting in fire or electric shock. If the equipment is used in an abnormal condition, such as when broken, then problems, smoke emission, abnormal odor/noise, and fire can result. If an abnormal condition exists, be sure to turn off the power, disconnect the power plug from a plug socket, and contact our dealer. Never repair the equipment o
ページ9に含まれる内容の要旨
iDP-460 User’s Manual PRECAUTIONS FOR INSTALLATION • Do not use or store the equipment in a place exposed to fire, moisture, or direct sunlight, or in a place near a heater or a thermal device where the prescribed operating temperature and humidity are not met, or in a place exposed to much oil, iron powder, or dust. The equipment may become out of order, emit smoke, or catch fire. • Do not install the equipment in a place like a laboratory where chemical reactions are expected, or in a place
ページ10に含まれる内容の要旨
iDP-460 User’s Manual PRECAUTIONS FOR HANDLING Do not handle the equipment in the following manners, because problems may result. • Do not use a power supply other than the specified AC adapter. • Do not print when there is no recording paper or ink ribbon set in the equipment. The print head may be damaged • Be careful not to drop foreign substances, such as clips, pins, and screws, into the main body. • Do not spill any liquid or spray any chemical-containing liquid over the equipment. • Do
ページ11に含まれる内容の要旨
iDP-460 User’s Manual DAILY MAINTENANCE • Prior to starting maintenance work, be sure to turn off the main body. • Use a dry soft cloth to wipe off stains and dust from the surfaces of the main body case. For severe soiling, dip the cloth in water and wring it, for wiping off the soil. Never use organic solvents, such as alcohol, thinner, trichlene, benzene, ketone, or chemical dusters. • If the equipment is contaminated with paper powder, use a soft brush to clean it. 11 CITIZEN
ページ12に含まれる内容の要旨
iDP-460 User’s Manual CONTENTS 1. OUTLINE.................................................................................................................................... 15 1.1 Features ........................................................................................................................................15 1.2 Unpacking.....................................................................................................................................15 2. BASIC SPECIFICATIO
ページ13に含まれる内容の要旨
iDP-460 User’s Manual 6.3.3 Timing Chart....................................................................................................................33 6.3.4 Data Receiving Control....................................................................................................33 7. SERIAL INTERFACE ................................................................................................................ 34 7.1 Specifications ......................................................
ページ14に含まれる内容の要旨
iDP-460 User’s Manual <<< German >>> 4. BETRIEB..................................................................................................................................... 54 4.1 Anschluß des Netzteils.................................................................................................................54 4.2 Anschluß des Schnittstellenkabels..............................................................................................55 4.3 Anschluß des Ausschubmechanismusste
ページ15に含まれる内容の要旨
iDP-460 User’s Manual 1. OUTLINE This is a small-size dot impact printer developed for various data communication terminals, POS terminals, kitchen-use printers, bank card, terminals, and so on. Its abundant built-in features allow you to widely use this printer for different applications. Prior to using it, read and understand this manual thoroughly. 1.1 Features (1) Small size, light weight, and low price (2) High-speed print (Bi-directional) (3) Red and black print (4) Very easy paper loadin
ページ16に含まれる内容の要旨
iDP-460 User’s Manual 2. BASIC SPECIFICATIONS 2.1 Model Classification The printer model is classified by the following designation method. iDP 460 - R F 120 - D Drawer Kick-Out Connector None : Without drawer Connector Model Name D : With drawer Connector AC adapter 120: For 120 V AC 230: For 230 V AC Character Set F: International Interface P: Parallel (CENTRONICS-based) R: Serial (RS-232C D-Sub) V: Serial(RS-232C mini DIN) Exclusive AC Adapter Types and Power Cords • 34AD-U (120 V 2-
ページ17に含まれる内容の要旨
iDP-460 User’s Manual 2.2 Basic Specifications Model iDP 460-RF120 iDP 460-RF230 iDP 460-VF120 iDP 460-VF230 Item iDP 460-PF120 iDP 460-PF230 Print method Serial dot impact method (Bidirectional print) Print width 64mm Print head 7-pin Print speed Approx. 3 lines/sec. (At single color continuous print) Print digits 40 or 42 Columns Character size 1.31mm (W) x 2.4mm (H) Character types Alphanumeric, international characters Line spacing 4.23 mm(1/6 inch) or 2.82 mm(1/9 inch) Minimum paper feed p
ページ18に含まれる内容の要旨
iDP-460 User’s Manual 2.3 Paper Specification 2.3.1 Recommended Paper •Type : Normal paper and non-carbon paper •Paper width : 76 ± 0.5 mm •Paper thickness : Single-sheet paper --- 45 to 55 kg/1,000 sheets/1,091 x 788 mm; Copying paper --- Non-carbon paper, 1 original + 1 copy, Total thickness 0.2 mm or less •Roll diameter : Ø83 mm or less •Core : Ø12 mm (Inner Diameter), Ø18 mm (Outer Diameter) 2.3.2 Printing Position 2.3.3 Cutter Layout 18 CITIZEN Approx. 20 mm
ページ19に含まれる内容の要旨
iDP-460 User’s Manual 3. OUTER APPEARANCE AND COMPONENT PARTS 19 CITIZEN
ページ20に含まれる内容の要旨
iDP-460 User’s Manual 4. OPERATION 4.1 Connecting AC Adapter (1)Turn off the Power switch. (2)Connect the cable connector of the AC adapter to the power connector located on the back of the printer. (3)In order to prevent disconnection of the cable connector, put it through a wire saddle, as shown in the figure below. (4)Connect the AC power cord plug to a plug socket. CAUTION : • Use only the specified AC adapter. • Use a different AC power supply from one used for any noise-generating devi
