ページ1に含まれる内容の要旨
CLP-8301
Barcode Label Printer
User’s Manual
ページ2に含まれる内容の要旨
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfu
ページ3に含まれる内容の要旨
EMI COMPLIANCE STATEMENT FOR CANADIAN USERS This Class A digital apparatus complies with Canadian ICES-003. This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of th
ページ4に含まれる内容の要旨
Important Safety Instructions 1. Read all of these instructions and save them for later reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 6. Slots and openin
ページ5に含まれる内容の要旨
Notice 1. Before use, be sure to read this manual. And keep it handy for reference when needed. 2. The contents of this manual may change without prior notice. 3. Reproduction, transfer, or transmission of the contents of this manual without prior consent is strictly prohibited. 4. We are not liable for any damage resulting from the use of the information contained herein, regardless of errors, omissions, or misprints. 5. We are not liable for any problems resulting from the use
ページ6に含まれる内容の要旨
Introduction Thank you for purchasing a Citizen CLP series barcode label printer. This manual is designed to help you quickly understand the basic operations of this printer. Features This printer accurately prints clear bar codes and various character fonts on media such as labels and tags at high speeds. Both direct thermal and thermal transfer printings are available. Wide media, yet small installation space Wide media up to 8.64” (228.6 mm) are available for this printer,
ページ7に含まれる内容の要旨
Table of Contents FCC Compliance Statement for American Users .............................i CE Declaration for European Users ...............................................i EMI Compliance Statement for Canadian Users..............................ii Important Safety Instructions.........................................................iii Notice..........................................................................................iv Trademark Acknowledgement........................
ページ8に含まれる内容の要旨
5.8 Turning the printer OFF...................................................... 40 Chapter 6 Configuring Your Printer Using the Menus.............. 41 6.1 The Group Menu............................................................... 41 6.2 Page Setup Menu.............................................................. 42 6.3 System Setup Menu.......................................................... 43 6.4 After Print Menu...............................................................
ページ9に含まれる内容の要旨
viii
ページ10に含まれる内容の要旨
Chapter 1 Unpacking Chapter 1111 Unpacking First open the carton and take out the top foam damper, then lift the printer main body out of the carton, holding the bottom of the printer firmly. Also keep the carton and packing materials as the printer must be packed with those materials for future shipment. Printer accessories Upper foam damper Printer Lower foam damper Carton CAUTION When taking the printer out of the carton, prep
ページ11に含まれる内容の要旨
Chapter 1 Unpacking 1.1 Printer accessories First, you should check that all of the following accessories are put in the carton. If any are missing, please contact your supplier. Power cord 1 piece Paper core 1 piece Paper holder shaft 1 piece Paper holder disks 2 pieces Label paper 1 piece Ribbon 1 piece Thermal head cleaner 1 piece Ribbon bobbin 2 pieces User’s manual 1 copy Power cord User’s manual Ribbon bobbin Label
ページ12に含まれる内容の要旨
Chapter 2 Safety Precautions Chapter 2222 Safety Precautions This chapter describes safety precautions when using the printer. Please read and understand the precautions in this chapter before using the printer. Safety signs The various safety signs included in this manual and pasted on the printer are intended to inform you of the correct and safe handling of this printer and protect against personal injury and property damage. Please familiarize yourselves with the followin
ページ13に含まれる内容の要旨
Chapter 2 Safety Precautions Avoid unsafe places Avoid unsafe places such as the top of a shaky desk, an uneven surface or any area subject to vibration. Failure to observe this precaution may cause the printer to fall or turn over, resulting in injury. Dot not put water-filled containers nearby Do not put containers filled with water or chemical liquids such as vases and cups near the printer. If a liquid spills or enters the printer, turn off the power switch immediately, remove th
ページ14に含まれる内容の要旨
Chapter 2 Safety Precautions Power cord Do not damage, break or modify the power cord. Putting heavy objects on the power cord or heating or pulling it may cause damages, leading to fire and electrical shock. If the power cord is damaged (e.g., the core is exposed or the wire broken), contact our service personnel. Continued use without corrective action may result in fire or electrical shock. When using, do not bend, twist, or pull the power cord. Failure to observe this precaution
ページ15に含まれる内容の要旨
Chapter 2 Safety Precautions CAUTION Avoid high-humidity areas Do not put the printer in areas with high-humidity or heavy condensation. If moisture has condensed on the printer, turn off the power switch immediately and leave the printer for a while until the moisture dries up. Using the printer when damp may result in electrical shock. Carrying Before carrying the printer, be sure to remove the plug from the outlet and the connecting cable to the outer equipment. If left connec
ページ16に含まれる内容の要旨
Chapter 2 Safety Precautions Opening/closing the top cover When opening/closing the top cover, be careful not to catch your fingers between the cover and chassis. Printhead The printhead remains at a high temperature immediately after printing. Therefore, be careful to avoid contact with the printhead when replacing the ribbon or media or cleaning the printer immediately after printing. Failure to observe this precaution may result in burning. The edge of the printhead can injure yo
ページ17に含まれる内容の要旨
Chapter 2 Safety Precautions Installation precautions After reading and understanding the safety signs, install the printer, observing the following precautions: Avoid dust Dust can stop the printer from cleanly printing a document. It can also cause breakdowns and shorten the printer life. Install away from high power-consuming equipment such as compressors and generators High power-consuming equipment such as compressors or generators can cause power voltage drops or g
ページ18に含まれる内容の要旨
Chapter 3 Names and Functions of Printer Parts Chapter 3333 Names and Functions of Printer Parts This chapter describes the names and functions of each part of the printer. 3.1 Printer main body 1. Top cover The top cover is an upper part of the whole cabinet of the printer. To open it, catch holds (embossed patterns on the surface) on both sides of the top cover with your fingers and open it all the way until it stops at hinges. To close it, just return slowly to the original po
ページ19に含まれる内容の要旨
Chapter 3 Names and Functions of Printer Parts 2. Printer inside 1 Tear bar 11 Paper holder disk 2 Platen 12 Paper guide (on both sides) 3 Control panel 13 Paper holder supporting plate 4 Transparent sensor 14 Paper holder shaft 5 Transparent sensor guide 15 Paper guide lock screw 6 Printhead 16 Printhead adjustment lever 7 Paper guide roller 17 Transparent sensor guide release lever 8 Reflective sensor and light-emitting devices 18 Printhead release lever 9 Interface box 19 Ribbon
ページ20に含まれる内容の要旨
Chapter 3 Names and Functions of Printer Parts 3. Rear and side of printer Optional USB interface connector slot plate Parallel interface connector (or optional IEEE1284ECP or Ethernet interface connector) Media viewing window RS-232C serial interface connector (not used) Power switch AC main power input port 11
