Winegard RV-0752の取扱説明書

ページ1に含まれる内容の要旨

desired. To receive satellite signal, attach pre-approval of the service. Approval of the service is at the sole
STEP 4. Install connectors on downlead and INSTRUCTIONS
discretion of Winegard Company.
coax from receiver/antenna to Auxiliary jack
set 2 cable as shown in Figure 5. Attach
Alternatively, Customer may ship the product prepaid to Winegard
downlead cable to jack on wall plate/power on wall plate.
Technical Services (located at 3111 Kirkwood Street, Burlington,
Iowa 52601, Telephone

ページ2に含まれる内容の要旨

INSTRUCTIONS Crimp Here Antenna Outdoor Receptacle WARNING: Use of this on/off Connector WA-1010 STEP 1. Select location for wall plate and Ferrule power switch with any product patio receptacle if required. Run coax cables between locations and install connectors on other than Winegard amplified Antenna each end. Mark cables so they may be Cable 1/4" #12 Wire RV antenna, could result in fire Input Input identified. Antenna downlead and +12 VDC or other damage. will also be needed at inside w