ページ1に含まれる内容の要旨
SLK3800B
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
ページ2に含まれる内容の要旨
At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive instructions on installing your motherboard and periph
ページ3に含まれる内容の要旨
Installing the Motherboard This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down, with the open side facing up. The drive cages and power supply should be visible. 2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn't suitable, please contact your mother- board manufacturer for the correct I/O panel. 3. Line up y
ページ4に含まれる内容の要旨
7. LED I, LED II connectors: This case comes with two extra LEDs, marked LED I, LED II. You may use these LED for various purchases such as SCSI LED, Message LED, etc. Connecting the USB Ports You will find a single 10-pin connector on a cable attached to the front USB ports. This is an Intel standard connector, which is keyed so that it can't be accidentally reversed (as long as it's connected to an Intel-standard mother- board header). Connect the 10-pin connector to your motherboard headers
ページ5に含まれる内容の要旨
Installing 3.5" Devices There are two 3.5" drive cages inside the case. The upper one can hold 2 external 3.5" drives, and the lower one can hold 5 internal 3.5" drives. 1. Release the upper cage by pulling the quick-release lever and then the cage towards the rear of the case. 2. Unscrew the thumbscrew at the bottom of the lower cage. To remove the lower cage, press the release tab at the top of the lower cage and pull the cage out of the opening towards yourself. Note: Some other remova
ページ6に含まれる内容の要旨
Specifications Size: 120 x 120 x 25.4 mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~ 13.8V Speed Input Air Flow Static Acoustical Input Current Pressure Noise Power 3 High 0.24A 2.24m / min 2.54mm-H2O 30 dBA 2.88 W 2000 RPM (max.) (79 CFM) (0.10inch-H2O) 3 Medium 0.2A 1.59m / min 2.54mm-H2O 28 dBA 2.4 W 1600 RPM (56 CFM) (0.06inch-H2O) 3 Low 0.13A 1.1m / min 0.92mm-H2O 25 dBA 1.56 W 1200 RPM (39 CFM) (0.04inch-H2O) The front fan (optional) should be installed so that the air is blowing
ページ7に含まれる内容の要旨
Antec Quality 3-Year parts and labor warranty (AQ3) See details at: http://www.antec.com/warranty.html 7
ページ8に含まれる内容の要旨
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Technical Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com Copyright 2005 Antec, Inc. All rights reserved. © All trademarks are the property of their respective owners. Reproduction in whole or in part without wri
