ページ1に含まれる内容の要旨
FLUXPOWER
HPS
400-500-600-800 KVA
3-phase UPS
High power solution for large,
mission-critical systems
Flexible and smart High effi ciency reduces overall cost
of ownership
The innovation and design of the Fluxpower HPS high
power UPS has resulted in the unit being the most
Fluxpower HPS has a new Wise ECO function which enables a
technologically advanced in its class.
total operating effi ciency of between 95 % and 98 %. This mode,
referred to as “Intelligent ECO mode”, signifi cantly reduces
ページ2に含まれる内容の要旨
2 OPTIONAL (External Manual bypass) 1. Input mains (separate for by-pass and rectifier) 1 2. Rectifier and battery charger FLUXPOWER HPS F F 5 3. External battery 4. Inverter 3-PHASE UPS 3xL-N 5. Emergency line (by-pass) with optional backfeed 6 2 4 contactor F 6. Inverter (SSI) and by-pass (SSB) static switch 3xL 3xL-N PE +B -B It is possible to install an external manual bypass, either in the matching cubicle or in wall mounted box 3 (bypass switch auxiliary contact must be connected to
ページ3に含まれる内容の要旨
3 FLUXPOWER HPS FEATURE RICH INTELLIGENCE Easy installation, operation and maintenance Parallel control is distributed Fluxpower HPS can easily be Optional between all units and sited within areas no wider than » Web / SNMP communication is achieved 1200 mm, and can be installed through the use of a CAN bus close to walls or other cabinets » Modbus connection loop. This has as cooling air is expelled » Relays the effect of producing a through vents on the top of the highly reliable syste
ページ4に含まれる内容の要旨
Model (kVA) 400 500 600 800 Capacity rating (kVA) 400 500 600 800 Dimensions W x H x D (mm) 1990 x 1920 x 990 2440 x 2020 x 990 2440 x 2020 x 990 3640 x 1920 x 990 FLUXPOWER Weight (kg) 1820 2220 2400 3600 HPS Input / output connection Hard wired (dual input) SPECIFICATION Battery External, 300-312 cells INPUT Nominal voltage 220 / 380, 230 / 400, 240 / 415 VAC single / 3-phase Voltage range -20 %, +15 % at 400 V nominal Frequency 50 / 60 Hz (45 – 65 Hz) Power factor 0.99 Current distortion (TH
