Peavey SP 112MXの取扱説明書

ページ1に含まれる内容の要旨

PEA VEY ELECTRONICS
SPECS
™
SP 112MX
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
120 Hz — 14 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
73 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
High Frequency Section:
1 meter in anechoic environment: Reco

ページ2に含まれる内容の要旨

SP 112 MX exceeds a predetermined Enclosure materials and finish: Power Handling threshold, the Sound Guard III circuit is 3/4" OSB finished in black carpet There are many different approaches engaged. The effect that this has is to to power handling ratings. Peavey rates subtly decrease the signal level going to Mounting provisions: this loudspeaker system's power handling the RX22 so that it will not be damaged using a full-range form of the AES This unit is not designed for overhead due to l

ページ3に含まれる内容の要旨

input of at least 2,000 Watts, with a Architectural and Engineering 3 + 2 YEAR LIMITED WARRANTY minimum amplifier headroom of 3 dB. The NOTE: For details, refer to the Specifications nominal radiation geometry shall be 45 warranty statement. Copies of The loudspeaker system shall have an degrees in the horizontal plane and 90 this statement may be obtained operating bandwidth of 120 Hz - 14 kHz. degrees in the vertical plane. The outside by contacting Peavey Electronics The nominal output le

ページ4に含まれる内容の要旨

™ SP 112MX INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 4/01 80304856