Peavey SP 118Xの取扱説明書

ページ1に含まれる内容の要旨

PEA VEY ELECTRONICS
SPECS
™
SP 118X
4 Ohms
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
50 Hz - 128 Hz (±3 dB)
Usable low frequency limit
(-10 dB point):
31 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
98.0 dB SPL, (2.00 V input)
Sub Bass Section:
98.0 dB SPL, (2.00 V input)
Maximum sound pressure level
10% rated power
Enclosure materials and

ページ2に含まれる内容の要旨

the SP 118X 4 Ohm is measured at a (1%) of rated input power or one watt, Description distance of 1-meter using a 1 Watt (into whichever is greater. Distortion is read The SP 118X 4 Ohm is an add-on the nominal impedance) swept-sine input from the graph as the difference between subwoofer designed to make it easy to signal. The solid line represents anechoic the fundamental signal (frequency add more low end to the SP X Series or filtered response; the dotted line is response) and the desired ha

ページ3に含まれる内容の要旨

Harmonic Distortion at 1/100 Rated Power 120 110 100 90 80 70 60 50 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 2nd Harmonic Figure 5 3rd Harmonic Harmonic Distortion at 1/10 Rated Power 130 120 110 100 90 80 70 60 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 2nd Harmonic Figure 6 3rd Harmonic dB SPL (re 20 Pa) dB SPL (re 20 Pa)

ページ4に含まれる内容の要旨

™ SP 118X 4 OHMS INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 6/01 80304860