ページ1に含まれる内容の要旨
TouchScreen
Wireless Weather Station
WS 550 US
Operating Instructions
La Crosse Technology
ページ2に含まれる内容の要旨
Contents 1. General aspects and functioning, Quick Overview ...................................................4 2. Preparatory work .......................................................................................................8 .. Preparing the weather station .......................................................................................8 Connecting to the mains ................................................................................................8 Inserting
ページ3に含まれる内容の要旨
4. Changing the batteries ............................................................................................3 5. Troubleshooting .......................................................................................................3 6. Range ........................................................................................................................34 7. Instructions for Maintenance and Care ..................................................................34 7.. Clea
ページ4に含まれる内容の要旨
1. General aspects and Function The TouchScreen Wireless Weather Station WS 550 US is a high-quality, highly comfortable universal weather measurement system that can record, process and display data from a maximum of 8 (currently not available) additional wireless temperature and humidity sensors as well as a combi-sensor up to a distance of 400 ft. (outdoor range). The combination sensor TX 550 US belonging to the weather station is meant for outdoor use and captures the following: Te
ページ5に含まれる内容の要旨
Overview of the display and operating options of WS 550 US: Display the inside temperature and humidity - Switch to displaying the dewpoint - Save the minimum and maximum temperature with time/date of occurrence - Save the minimum and maximum humidity with time/date of occurrence - Comfort zone indicator - Graphical trend display of the last 24 h (only for temperature) Display’s outdoor temperature/humidity from Combi Sensor. - Can be switched: Display the dewpoint or wind-chill temperatur
ページ6に含まれる内容の要旨
The weather forecast also plays an equally important role. So "Oscar Outlook" has different displays and clothing depending on the weather situation. You will find a detailed description of the evaluation criteria in chapter 3.4 of this Operating Instructions manual. Display the sunrise andsunset time - Calculation can be done in the latitude range of -60° to +60˚ N depending on the location data that is to be entered. Moon phase display - Display the current moon phase: New moon, waxing
ページ7に含まれる内容の要旨
Quick overview of the display fields 1 2 3 5 6 4 26 25 7 24 8 23 9 22 21 10 20 11 19 12 13 18 14 17 16 15 1. Current indoor temperature with temperature trend 2. Displays the current direction of the wind (main wind direction) 3. Display the fluctuation range when wind direction is changing 4. Displays the speed of the wind 5. Current humidity of the selected outdoor sensor 6. Current temperature of the selected outdoor sensor with temperature trend and recep- tion display 7. Displays the
ページ8に含まれる内容の要旨
2.1. Preparing the weather station The weather station is exclusively operated via the plug-in mains adapter that is delivered. Battery operations are possible with 4 AA cells (1.5 V, alkaline type) in an emergency mode. The functions of the weather station are then available only in a restricted manner (e. g. no background lighting, no live mode available). The following image shows the rear of the station with battery comportment, correct insertion of the batteries, assembling points for
ページ9に含まれる内容の要旨
Inserting batteries Remove the cover of the battery compartment and insert four 1.5 V AA-cells, (alka- line type LR6) according to the correct poles into the battery compartment. Close the battery compartment again. PC-connection To connect the station to a PC, use the USB cable to connect the mini USB jack to the USB port of WS 550 US. The plug at the other end of the cable is connected to the USB port of a PC (also see chapter 9.) Installing / Mounting Depending on the requirement, the w
ページ10に含まれる内容の要旨
2. Lock in the foot support in the lock- ing nose of the glass foot and place it on the two screw domes. 3. Screw the enclosed Allen key and 2 Allen screws on the glass foot. Please note that the lighting cable of the device foot is guided in from the side as shown in the picture so that it does not get crushed. 4. Place the weather station at the locking nose of the foot support and tilt it on the foot support till the screw dome neatly grips into the corresponding intakes of the weat
ページ11に含まれる内容の要旨
5. Screw the foot support on to the weather station using the enclosed Allen key and 2 Allen screws. 6. The cables are thus connected, inserted into the foot support and guided. Please note that the cable lies exactly in the center as shown so that it will not prevent the lid from subse- quently locking in. Note! The cable for lighting the sup- port foot and the USB cable can only be inserted in one direction! Do not insert it using force! Stow away excessive cable in a chamber
ページ12に含まれる内容の要旨
8. At the end, the cover is inserted in the corresponding locks of the cable shaft (see detailed picture above), tilted upward and locked in at the top (see lower picture).
ページ13に含まれる内容の要旨
- After connecting the plug-in AC adapter, the system will run a short test of all display segments in the display (all segments will be displayed). - You will then hear a short beep and the version number of the weather station will be displayed. - Finally, the inside temperature and the humidity as well as the air pressure will be displayed. The corresponding sensors are directly built in the base station. - Now the external sensors need to be started up. 2.2.Combi-sensor TX 550 U
ページ14に含まれる内容の要旨
4. Insert the plug into the socket of the wind meter 5. Push up the base and then lock it by turning it to the right pipe-end that is marked with a sticker. - Install the fully mounted sensor within the possible transmitter radius (max. 400 ft. free field; take into account the dampening due to building walls, etc.) so that it stands in open space - the rain can thus fall directly into the rain sensor and the wind measurement is not hampered by adjacent buildings or trees - 50 ft. clearen
ページ15に含まれる内容の要旨
- Open the sensor housing by rotating it towards the left and pulling down the cas- ing (see picture below). - Use a pointed object to press the key above the battery compartment and insert three AA Alkaline batteries according to the polarity marking in the battery com- partment. Release the switch and then remove any adhesive tape that you may used to secure the wind meter. - Bring the respective receiving station in the receiving mode according to the instructions of the corresponding O
ページ16に含まれる内容の要旨
3. Operations The wireless sensor data is not shown on the display immediately after installing the wireless sensors and starting up the base device. As each sensor has an in- ternal individual serial number, which is automaticly logged into the base station during start up. The advantage here is that data is individually recorded only for those sensors that are logged in and not for other sensors, say of neighboring systems, and also not after a restart. Please note! If no input field i
ページ17に含まれる内容の要旨
- Touch the "ENTER" field, the display is: SENSOR NO1 ADD DEL - Repeatedly touch the "SENSOR" field and select the memory slot where you want to store the particular sensor. Please note that TX 550 US can only be stored in slot 9. - Then select "ADD"; the display is (for e.g. for sensor 9: TX 550 US): SENSOR NO9 - - SYNC ADD DEL - The particular sensor is now taught to the system. Insert the batteries in the respective sensor and press its key to teach. Please also read chap
ページ18に含まれる内容の要旨
3.2. Operations As all important data is displayed simultaneously in the display, operations are ba- sically restricted to selecting other sensors or some other weather data by slightly touching the corresponding display field. The display is divided into display field and menu row. In the normal mode (device is in the main menu): MIN MAX RESET CFG are accessible by touching the respective fields of the display for the following functions: INDOOR: Switching between temperature a
ページ19に含まれる内容の要旨
Main Menu Functions MIN: Call up the minimum values After touching the ”MIN” area, the minimum values of the respective data are displayed. When you touch the corresponding field (temperature, air pressure, etc.), the corresponding time-stamp (date, time) of the occur- rence of the extreme value are displayed. You will go to the main menu and normal data display if your press "MIN" again. MAX: Call up themaximum values After touching the "MAX" area, the maximum values of the respectiv
ページ20に含まれる内容の要旨
3.3. Configuration The weather station is delivered in such a state that its basic functions (except moon phase, sunrise, sunset, date, time, min./max. display) are ready to use without doing any settings. However, another configuration would be needed to use the additional functions and the time-related functions. - Touch "CFG" field to open the configuration menu. - Repeatedly touch "NEXT" to go to the respective next main menu point of the configuration menu. You will find in the appendix
