ページ1に含まれる内容の要旨
Radio / CD
Radio / CD
Atlanta CD34 7 643 191 510
Venice Beach CD34 7 643 192 510
Operating and installation instructions
Notice d’emploi et de montage
Instrucciones de manejo e instalación
Instruções de serviço e de montagem
http://www http://www.blaupunkt.com .blaupunkt.com
ページ2に含まれる内容の要旨
Open here Ouvrir s.v.p. Por favor, abrir Favor abrir 2 CD34_2-3_EN/FR/SP/PO 2 10/11/03, 19:38
ページ3に含まれる内容の要旨
11223333344444 111222 55555 66666 ::::: 88 77 99999 888 777 ;;; ;; 3 CD34_2-3_EN/FR/SP/PO 3 10/11/03, 19:38 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH
ページ4に含まれる内容の要旨
CONTROLS 1 button to open and release the control panel. 2 Button to switch the unit on/off and to mute the unit. 3 Volume control. 4 Short press: BND button, to select the FM memory bank and the AM waveband, source selection to radio mode. Long press: TS, to start the Travelstore function. 5 AUDIO button, to adjust the bass, treble, balance and fader settings, X-Bass, Sound Preset EQ. 6 Short press: button, to display the time. Long press: to change the display priority. 7 Arrow buttons 8 Shor
ページ5に含まれる内容の要旨
TABLE OF CONTENTS Road safety ..................................... 6 Ejecting a CD ................................ 15 Installation ....................................... 6 CD changer mode .................. 15 Accessories .................................... 6 Switching to CD changer mode ..... 15 International telephone information ... 6 Selecting a CD .............................. 15 Removable control panel ......... 7 Selecting tracks ............................ 15 Theft protection .....
ページ6に含まれる内容の要旨
NOTES AND ACCESSORIES Thank you for deciding to purchase a Remote control Blaupunkt product. We hope you enjoy RC-12H is included in the Venice Beach using this new piece of equipment. CD34. You can conveniently access the Before using the device for the first time, most important functions of your car please read these instructions carefully. radio from the steering wheel via the The Blaupunkt editors are constantly optional RC08 or RC10. working on making the operating Amplifier instructions c
ページ7に含まれる内容の要旨
REMOVABLE CONTROL PANEL Notes: Removable control panel The unit may only switch off after a Theft protection few seconds, depending upon the “OFF TIMER” setting in the MENU As a way of protecting your equipment as described later. against theft, the unit is equipped with a detachable control panel (release All current settings of the radio are panel). Without this control panel, the saved. car radio is worthless to a thief. CD already inserted in the unit Protect your equipment against the
ページ8に含まれる内容の要旨
REMOVABLE CONTROL PANEL SWITCHING ON/OFF Off timer Switching on/off After opening the control panel, the unit There are various ways of switching the will switch off after a pre-adjusted time unit on/off: between 0 to 30 seconds. Switching on/off using the vehicle ➮ Press the MENU button 8. ignition ➮ Press the fi button 7 twice to If the unit is correctly connected to the display “OFF TIMER”. vehicle’s ignition and it was not switched off using ON/OFF button 2, it will ➮ Set the time using the @
ページ9に含まれる内容の要旨
SWITCHING ON/OFF ADJUSTING THE VOLUME Switching on by inserting a CD Adjusting the volume If the unit is switched off and there is no The volume can be adjusted in steps CD inserted in the drive, from 0 (mute) to 66 (maximum). ➮ press the button 1. ➮ To increase the volume, turn the volume control 3 to the right. The release panel opens. ➮ To decrease the volume, turn the ➮ Gently insert the CD with the volume control 3 to the left. printed side uppermost into the drive until you feel some Sett
ページ10に含まれる内容の要旨
ADJUSTING THE VOLUME Instantaneous volume reduction Confirmation beep (mute) For some functions you will hear a confirmation beep if you keep a button This feature allows you to pressed for longer than two seconds. instantaneously reduce (mute) the For instance, after storing a radio station volume to a level preset by you. to a station button you will hear a ➮ Briefly press button 2. confirmation beep. The beep can be “MUTE” appears in the display. switched on/off. ➮ Press the MENU button 8. Se
ページ11に含まれる内容の要旨
RADIO MODE Radio mode Selecting the frequency range/ memory Switching to radio mode This unit can receive programmes If you are listening to CD, CD changer broadcast over the FM and AM or AUX mode, frequency ranges. There are three ➮ press the BND-TS 4 button preset memory levels for the FM range and one for the AM range. Six stations or can be stored on each memory level. ➮ keep pressing the SRC button : Selecting the FM memory level or until “FM” or “AM” (“MW”) appears the AM frequency range i
ページ12に含まれる内容の要旨
RADIO MODE “SENS HI” means that the tuner is highly Note: sensitive. “SENS LO” means it is set to Stations that were previously the lower sensitivity setting. stored in this memory are deleted in the process. ➮ Set the required sensitivity using the @ or # buttons 7. ➮ Press and hold the BND-TS button 4 until the seek tuning starts. When you have finished making your changes, The station storing procedure begins. “FM TSTORE” or “AM TSTORE” ➮ press the MENU button 8. appears in the display. Aft
ページ13に含まれる内容の要旨
RADIO MODE CD MODE Setting the scantime CD mode ➮ Press the MENU button 8. You can use this unit to play standard audio CDs, CD-Rs and CD-RWs with a ➮ Keep pressing the fi or % button diameter of either 5 or 3 inches. 7 until “SCAN TIME” appears in the display. Risk of damage to the CD ➮ Set the required scantime using drive! Contoured CDs (shape CDs) are not suitable for playback in this the @ or # buttons 7. unit. When you have finished making your We accept no liability for any damage changes
ページ14に含まれる内容の要旨
CD MODE Stopping SCAN and continuing Selecting tracks playback ➮ Press one of the arrow buttons 7 ➮ To stop scanning, press the MENU to select the next or previous track. button 8. If you press the fi or @ button 7 once, the current track will be played again The current track will then continue to be played. from the beginning. Fast searching (audible) Repeating tracks (REPEAT) To fast search backwards or forwards, ➮ If you want to repeat a track, press button 4 RPT 9. ➮ keep one of the @ # butt
ページ15に含まれる内容の要旨
CD MODE CD CHANGER MODE Displaying CD text CD changer mode Some CDs feature so-called CD text. Note: The CD text may include the name of Information on handling CDs, the performer, the album and the track inserting CDs and operating the name. CD changer can be found in the You can have the CD text displayed as operating instructions supplied with running text at every change of track. your CD changer. After the CD text has been displayed once, the standard display (as Switching to CD changer m
ページ16に含まれる内容の要旨
CD CHANGER MODE press button 5 MIX 9 longer than Changing the display two seconds. 5 options are available: “MIX ALL” appears briefly and MIX lights Track number and play time up in the display. Track number and clock CD number and track number Stopping MIX CD number and clock ➮ Press button 5 MIX 9 briefly and CD number and play time “MIX OFF” appears briefly in the ➮ Press the button 6 once or display and MIX disappears. several times for longer than two Scanning all tracks on all C
ページ17に含まれる内容の要旨
CLOCK - TIME When you have finished making your CLOCK - Time changes, Briefly displaying the time ➮ press the MENU button 8. ➮ To display the time, briefly press Displaying the time continuously the button 6. when the unit is off and the Setting the time ignition is on ➮ To set the time, press the MENU “CLOCK ON” setting in the menu allows button 8. you to display the time when the unit is off and the vehicle ignition is on, ➮ Keep pressing the fi or % button 7 until “CLOCK SET” appears in ➮ pre
ページ18に含まれる内容の要旨
SOUND AND VOLUME DISTRIBUTION SETTINGS Sound and volume Setting the left/right volume distribution (balance) distribution settings You can adjust the Bass, Treble and ➮ To set the left/right volume distribution (balance), press the X-Bass settings for each source separately (radio, CD, CD changer and AUDIO button 5. AUX). The volume distribution (balance “BASS” appears in the display. and fader) settings and sound EQ apply ➮ Keep pressing the # button 7 to all the audio sources. until “BAL” appe
ページ19に含まれる内容の要旨
EQUALIZER AND X-BASS Equalizer and X-BASS Selecting preset sound effect You can select preset sound effect for X-BASS the following styles of music: X-Bass means increased bass at low ROCK volumes. POP Note: CLASSIC X-BASS can be adjusted separately for each audio source The settings for these music styles have (radio, CD, CD-changer and AUX). already been programmed. To select one of the sound presets, ➮ To set the X-BASS, press the AUDIO 5 button. ➮ press the AUDIO 5 button. “BASS” app
ページ20に含まれる内容の要旨
LEVEL DISPLAY EXTERNAL SOURCES Setting the level display External audio sources The level display briefly provides a Instead of connecting a CD changer, symbolic display of the volume and the you can connect another audio source audio control settings whilst you are equipped with a line output. The audio adjusting them. source, for example, can be a portable CD player, MiniDisc player or MP3 When settings are not being made, the player. level display indicates the music level The AUX input must
