ページ1に含まれる内容の要旨
HEADPHONES
PROV716/
VOD705
PROV716T/
PROV716G
DVD PLAYER
AUTO FM
CHANNEL SOURCE ON OFF AUTO VOLUME SELECT
PROG
AP S
WITH
DROP-DOWN
VIDEO
TV/MONITOR
®
ELECTRONICS CORP.
INPUT
VIDEO AUDIO
IR
L R
ページ2に含まれる内容の要旨
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the PROV716/PROV716T/PROV716G should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Warnings Do not use any s
ページ3に含まれる内容の要旨
Features • • • • • 7 Inch TFT (Thin Film Transistor) Active Matrix Congratulations on your purchase of the Audiovox PROV716/PROV716T/PROV716G DVD Player with LCD (Liquid Crystal Display) Monitor Drop-Down Video TV/Monitor. The PROV716/ • • • • • OSD (On Screen Display) for Control of Picture PROV716T/PROV716G has been designed to give you and your family many years of video entertainment Quality and Functions in the mobile environment. Please read the directions that follow to familiarize your
ページ4に含まれる内容の要旨
HEADPHONES Controls and Indicators Diagram 1 POW ER PLAY 2 4 EJECT STOP 3 5 1 6 7 8 8 9 24 10 23 AUTO FM CHANNEL SOURCE ON OFF AUTO VOLUME SELECT PROG AP S 11 22 21 12 20 13 19 14 NOTE : Screen Mode Button 15 Located on inside with 18 16 screen in the closed position. 17 INPUT VIDEO AUDIO IR L R
ページ5に含まれる内容の要旨
Main Function Descriptions 1. DVD Disc insertion slot – For loading Disc. 12. CHANNEL( )Button – Use this button to increase the channel number to the desired number. Note : When TV 2. POWER Button – Bright red when system is on dim when function is selected. off. 13. Auxiliary Audio Right Input. 3. EJECT ( ) Button – For ejecting discs from the disc compartment. 14. Auxiliary Audio Left Input. 4. PLAY ( ) Button – This button is used to enter the play 15. Auxiliary Video Input. mode. 1
ページ6に含まれる内容の要旨
22. FM Select Button – Each time this button is pressed will switched FMM cycles through (FM OFF – POD AUDIO – SAT AUDIO) and the frequency of the channel of modulator will remain same. 23. VOLUME ( ) Button – Use this button to decrease the volume level of the headphone jacks. It is also used to make picture adjustments in picture select mode. Note:These buttons will not affect the volume of wireless headphones or the wired RF modulator. When using these devices the volume must be adjusted
ページ7に含まれる内容の要旨
Remote Control Operation POW ER EJECT 1 32 SOURCE 2 AUTO 31 MEMORY 3 SKIP/ SEARCH 4 Battery Installation ERASE/ –+ WRITE VOL 5 30 6 CH 29 Before attempting to operate your Remote Control, MUTE PIX 7 28 install the batteries as described below. 8 27 1) Turn the Remote Control face down. Using a 9 Enter SETUP MENU fingernail, lift the battery cover off. 10 26 25 2) Install two “AAA” batteries as shown. Make RETURN REPEAT CH 11 24 sure that proper polarity (+ or -) is observed. 23 21 3) Align th
ページ8に含まれる内容の要旨
DVD Function Descriptions *Function control is available on the unit and the remote control. 1. POWER Button* Press this button to turn the PROV716/PROV716T/PROV716G on. Press the button again to turn the PROV716/ PROV716T/PROV716G off. 2. SOURCE Button* Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio / video source will change the sources: DVD, TV, AV1 and
ページ9に含まれる内容の要旨
6. Channel Up ( ) Button* Use this button to increase the channel number to the desired channel and to scroll upward in menu options. 7. MUTE Button Press this button to mute the audio. Pressing the button again restores sound to the previously set level. 8. ENTER Button Used to implement setting selected. 9. LEFT ( ) Button Allows the user to shift left in the menu options. 10. MENU Button Allows the user to access the main menu. 11. RETURN Button Allows the user to return to the menu
ページ10に含まれる内容の要旨
13. DISPLAY Button Press to display DVD Disc current information. Press DISPLAY button DVD Player Perform Once Display current TITLE & CHAPTER Twice Display current SUBTITLE 3 times Display current AUDIO language & channel 4 times Display current surround status 5 times Display current ANGLE 6 times Display A-B current status 7 times Display REPEAT current status 8 times Display is turn off For Title & Chapter, use cursor buttons to do title/cha
ページ11に含まれる内容の要旨
17. REV ( ) Button Allows the user to search in a backward direction at 2,4, 6 and 8 times the normal speed. 18. FWD ( ) Button Allows the user to search in a forward direction at 2,4, 6 and 8 times the normal speed. 19. PLAY ( )Button* Press this button to activate the play mode while a disc is loaded into the disc compartment. 20. STOP ( ) Button* DVD disc play will be stopped. 21. DVD Mode Select button Switches certain function keys on the remote control for DVD functions. 22. V
ページ12に含まれる内容の要旨
26. SETUP Button Allows the user to select the DVD player’s options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup). 27. RIGHT ( ) Button Allows the user to shift to the right in the menu options. 28. PIX Button (PICTURE SELECT) Each time this button is pressed, the on screen picture adjustment display the “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting.
ページ13に含まれる内容の要旨
32. EJECT ( )Button* The disc will be ejected from disc compartment. 33. FM TRANSMITTER ON/OFF Button Turns FM Modulator power on/off. 34. SOURCE SELECT Button* With FM ON, used to selects the POD Audio (DVD and POD audio) or SAT Audio (Second IR input). With FM OFF, used to select SAT Audio or Car Audio. 35. CHANNEL SELECT Button Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1M
ページ14に含まれる内容の要旨
HEADPHONES Turning the PROV716/PROV716T/PROV716G On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After
ページ15に含まれる内容の要旨
HEADPHONES Remote Sensor Remote Sensor The PROV716/PROV716T/PROV716G incorporates two Infrared Eye sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared AUTO FM PROG CHANNEL SOURCE ON OFF AUTO VOLUM E SELECT sensor can relay signals from most manufacturer’s remote controls AP S to i
ページ16に含まれる内容の要旨
Wired Headphones There are two 1/8” headphone jacks on the PROV716/PROV716T/PROV716G that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the PROV716/PROV716T/ PROV716G remote control. Wired FM Modulator The PROV716/PROV716T/PROV716G is equipped with an RF modulator, that allows you to listen to the PROV716/ PROV716T/PROV716G audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9
ページ17に含まれる内容の要旨
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.” Types of Discs your DVD will play • DVD discs – DVD discs which contain video. • Audio discs – Aud
ページ18に含まれる内容の要旨
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup display, you can do the initial setup, adjust the picture quality, and set the various outputs. You can also set a language for the on-screen display and the setup display and limit playback by children. 1) Press the SETUP button to display the “setup menu” on the display screen. 2) Select the main item you want using the cursor ( ) buttons, and t
ページ19に含まれる内容の要旨
Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the (▼▲▼▲▼▲ )buttons to select the appropriate ▼▲▼▲ settings. 4:3 / PS This displays the wide picture on the screen with a portion of the left & right side removed. 4:3 / LB This displays the wide picture with black bands on the upper and lower portions of the screen. 16:9 This displays a picture with black bands on the upper and lower portion
ページ20に含まれる内容の要旨
Settings for Parental (Parental Control) This section of the SETUP Menu allows user to control the content of movie playback from G to Adult. The Parental Control function allows you to limit viewing to your preference. 1. Use the ▼▲ ▼▲ ▼▲ ▼▲ ▼▲ buttons to select from: G (Children) PG PG 13 R NC-17 ADULT (Adult) Note:The lower the value, the more strict the limitation. Press the Enter button to confirm the selection. 2. Input a password in 4 digits using the numeric buttons then press the
