ページ1に含まれる内容の要旨
KITCHEN DVD PLAYER
TFTV100A
USER'S MANUAL
ページ2に含まれる内容の要旨
Table of Contents 1 Table of Contents ------------------------------------------------------------- 2 Important Safety Instruction ------------------------------------------------ 5 FCC Notice --------------------------------------------------------------------- 6 Characteristic Features ------------------------------------------------------ 7 Disc Information --------------------------------------------------------------- 8 Front Panel -----------------------------------------------------------
ページ3に含まれる内容の要旨
Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equil
ページ4に含まれる内容の要旨
Important Safety Instructions Note: Read these instructions. 1. Keep these instructions. 2. Heed all warnings. 3. Follow all instructions. 4. Do not use near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Maintain well ventilated conditions around 7. the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, sto
ページ5に含まれる内容の要旨
Important Safety Information IMPORTANT FOR LASER PRODUCTS 1. CAUTION: LASER RADITATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTUMEMENTS CLASS 1M LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Region code information: DVD players and discs are coded by region. If the region number
ページ6に含まれる内容の要旨
FCC Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
ページ7に含まれる内容の要旨
Characteristic Features This product incorporates a DVD Advanced Playing Functions Compatibility player, LCD display, TV receiver and Plays: DVD, DVD-RW, CD, CD-R/RW radio function in one system. It is and Picture CD and JPEG discs etc. designed for convenient use in the kitchen. Please refer to page 30 for the On-Screen Display installation instructions. Displays your choice of English, Multiple Modes French, Spanish, German or Italian. DVD TV Fast Search Function Radio Multi-speed, fast forwa
ページ8に含まれる内容の要旨
Disc Information Disc Formats Supported By This Player PLAYBACK TIME/ DISC LOGO DIAMETER PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 12cm 266 min (DS-SL) 484 min (DS-DL) DVD 41 min (SS-SL) 75 min (SS-DL) 8cm 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min CD 8cm 20 min JPEG 12cm The disc maker specifies the operation of some DVD discs. Please refer to the instruction manual with the disc. Care of Discs Cleaning of Discs Do not touch the playing surface of the If a disc has fingerprints or dust on
ページ9に含まれる内容の要旨
Front Panel Front Panel Drawing 1. POWER Button Press to enter or exit the STANDBY mode. 2. Disc Tray Used to load disc. 3. PLAY/PAUSE Button Press to start or pause playback under DVD mode. 4. STOP Button Press to stop playback under DVD mode. 5. Button Under DVD mode, press once to go to beginning of the current track/chapter. Press twice to go to the previous track/chapter during DVD disc playback. 6. Button Press to go to the next track under DVD mode. 7. SOURCE button Pr
ページ10に含まれる内容の要旨
Front Panel 9. Remote Sensor Receives the remote control signal for operation. 10. Display panel Displays the time, status, radio frequency and radio station number. When adjusting volume, the VOL and volume level will be displayed on the display panel for several seconds. 11. SEEK+/ SEEK- Button Under radio mode, press once to fine tune the frequency backward or forward. Press for about 1.5 seconds to search for radio stations forward or backward automatically. Under DVD mode, press the
ページ11に含まれる内容の要旨
Front Panel Rear Panel Drawing 1. ANT INPUT jack 4. Left/Right AUDIO input jack Connected to external antenna to Connection for audio input. receive the TV program in the TV mode. 5. VIDEO input jack 2. FM 75 coaxial antenna jack Connection for video input. 3. AM antenna jack 6. Direct current 12V input jack Display Panel Drawing 1. FM radio status indicator 5. Minute or character indicators 2. AM radio status indicator 6. Character indicators AM time indicator 7. FM frequency unit
ページ12に含まれる内容の要旨
Remote Control Preparation Refer to the drawing and remove the Using the Remote Control battery receptacle. Point the remote control towards the main unit when operating. The remote control works best at a distance less 0 than 7m and at an angle of 60 to the front of the unit. No obstacles may stand in the way between the remote control and the infrared sensor. Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component. Insert the receptacle into the re
ページ13に含まれる内容の要旨
Remote Control Remote Control Drawing - 12-
ページ14に含まれる内容の要旨
Remote Control 1. POWER Button 11. /SEEK- Button Press to access or exit the In the radio mode, press once to fine STANDBY mode. tune frequency backward. Press for about 1.5 seconds to search radio 2. SUBTITLE Button stations backwards automatically. Press to select a subtitle language or to Under DVD mode, press to activate fast turn subtitles off when a DVD with backward playback. multi-subtitles is playing. 12. /SEEK+ Button 3. DVD Button In the radio mode, press once to fine Press t
ページ15に含まれる内容の要旨
Remote Control 19. EJECT Button 28. TIME Button Press to open or close the disc tray. Press it once to display the time on the display panel in standby status, the 20. AUDIO Button time is still displayed on the display Press to access various audio panel languages, when the DVD disc contains Press it twice to set the time on the multiple audio languages. display panel. Use the buttons to select the editing position of hour or 21. 0-9 Number Buttons minute, use the buttons to
ページ16に含まれる内容の要旨
System Connections Do not connect the power cord until all other connections have been made. Each time you restart the unit, it remembers the last function used. Please make all the connections before installing the unit in the kitchen. Connecting to an External A/V Signal Source Connections should be made as follows: Connect the L/R audio cables according to the marks on the rear panel of the unit: Connecting to a TV Signal Input Source - 15 -
ページ17に含まれる内容の要旨
System Connections Connecting an Antenna Connect the supplied AM/FM antennas to listen to the radio. In order to improve the signal, move the AM loop antenna away from the system and other equipment. Extend FM antenna fully. Keep the FM antenna as horizontal as possible after connection. When connecting the supplied AM loop antenna, connect the two black cord ends to the AM and ground jacks as shown below. OUTDOOR FM ANTENNA (not suppled) FM(75 ) EARTH WIRE (not supplied) If the FM reception i
ページ18に含まれる内容の要旨
System Connections Connecting the Power Adapter This unit is powered via the switching power adapter (supplied). See the below figure for details: 1. Connect the AC adapter to the jack marked with "DC 12V IN" on the rear panel of the unit. 2. Plug the three-prong end of the power cord to the grounded electrical socket. 3. When not using the unit, turn off the power of the unit first, and then unplug the power supply to prevent malfunctions. - 17 -
ページ19に含まれる内容の要旨
Radio Function Radio Function Operation Press the AM/FM button on the remote control or SOURCE button on the front panel to enter the AM/FM radio mode. Press and hold the SEEK+/SEEK- button for about 1.5 seconds to start searching forward/backward from the current frequency. Press the SEEK+/SEEK- button again to stop searching. The radio frequency will be displayed on the display panel. The frequency range of FM is from 87.5MHz to 108MHz; frequency range of AM is from 531kHz to 1602kHz. Fine Tu
ページ20に含まれる内容の要旨
TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button to turn on the power. Press the TV button on the remote control or the SOURCE button on the front panel to shift to TV mode. Press the / (CH+/CH-) buttons to select the desired channel. Or first press the number buttons on the remote control for input, the press the OK button for confi
