ページ1に含まれる内容の要旨
E n g l i s h
ALDINET S.P.A.
VIALE C.COLOMBO, 8
20090 TREZZANO S/N (MI)
ITALY
ページ2に含まれる内容の要旨
Welcome Thank you for buying the Roof Mount LCD Monitor with DVD player. Please read this manual carefully before using the Roof Mount LCD Monitor with DVD player in order to get the most out of all the features and functions. Keep this manual in a safe place, as it can be a valuable tool in helping you to understand all the features and functions. Contents Safety information.........................................................................1 DVD player features .............
ページ3に含まれる内容の要旨
or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Be careful not to drain the car battery while using the unit with the car engine stopped. To avoid draining the battery, it is suggested that the vehicle engine always is running while using the unit. Do not disassemble or alter the unit in any way. Failure to do so can cause damag
ページ4に含まれる内容の要旨
DVD player features This player is a Roof Mount 9.2" TFT-LCD Color Display with DVD player that can be used as a stand-alone display, or can be integrated into a mobile multimedia system. This player has the following features: 9.2" TFT-LCD color monitor (16:9) Roof Mounting Application Pixel(dots):800RGB(W)x480(H) Wide Viewing angle(up/down/left/right):45/55/65/65 NTSC and PAL Compatible Adjustable Color/Contrast/Brightness/Tint Manual Viewing Angle Adjustment 0 Vertical Adj
ページ5に含まれる内容の要旨
Multi-angle Function A DVD video that is filmed from multiple angle which allows you choosing to view from different perspectives. Subtitle Function A DVD video can record subtitles for up to 32 languages to choose from. DISC PLAYBACK This DVD player can play the following formats. About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the second session is the Data session. Your perso
ページ6に含まれる内容の要旨
DISPLAY Item Name Function or Control 1 Dome Light Provides an interior light for the vehicle. 2 Reset button Press with a pencil or other narrow-tipped tool to rest the player. 3 Power button Press to turn on or turn off the player 4 Menu button Press to open the TFT menu. Press again to select a menu item. 5 SRC input source Press to select the video input mode (DVD-IN button /USB/ SD/ MMC/ MS, AV IN1, AV IN2,). (When the units sets in DVD mode, press it can change USB/SD/MMC/M
ページ7に含まれる内容の要旨
Item Name Function or Control 9 Panel open button Press to open the LCD panel. 10 (SKIP-) button Press to skip the previous chapter on DVD or track on CD; Press and hold it to fast reverse playback at 2x, 4x, 8x, 16x and 32x speeds. 11 Press to skip the next chapter on DVD or track (SKIP+) button on CD; Press and hold it to fast forward playback at 2x, 4x, 8x, 16x and 32x speeds 12 Stop button Press to stop playback, press [PLAY] or [ENTER] button to start playing at the last position
ページ8に含まれる内容の要旨
REMOTE CONTROL Item Name Function or control 1 Press to turn the player on or off. Power 2 Setup Press to access the setup menu to modify the DVD player settings. 3 Mute Press to turn the sound on or off. 4 Press to eject the disc. Eject 5 0-9 Press to enter numbers directly, such as for settings or track numbers. 6 Press to go to the previous chapter on DVD or Previous track on CD. 7 Press to play or pause the CD or DVD. Play or Pause 8 DVD: press to change the audio language
ページ9に含まれる内容の要旨
Item Name Function or control 9 Press to navigate in a menu and change setting Arrow and ENTER buttons values. 10 Press to fast reverse playback at 2x, 4x, 8x,16x FR and 32x speeds. 11 Random Press to play chapters or tracks in random order. 12 A-B Press to repeat playback from point A to point B. 13 SRC Press to select the video input mode (DVD-IN /USB/ SD/ MMC/ MS, AV IN1, AV IN2,). (When the units sets in DVD mode, press it can change USB/SD/MMC/MS mode.) 14 Press to return the mai
ページ10に含まれる内容の要旨
Setting up your DVD player PACKAGE CONTENTS Name of parts Quantity Player 1 IR remote control with battery 1 AV cable 1 ST4.2x16 screw 6 CM 4x8 screw 4 Metal mounting plate 1 User’s manual 1 Rubber gasket 1 Use only the contents of this package to install and use the DVD player. Use of any accessories not provided with this player may result in damage to the player. 9
ページ11に含まれる内容の要旨
Installing your DVD player Note: Do not attempt to install or service your player by yourself. Installation or servicing of the player by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Wiring and connections 10
ページ12に含まれる内容の要旨
1. Battery + lead (Yellow) To connect the positive terminal of the car battery. 2. ACC Power Lead (Red) To ACC power lead powered when engine key position is ACC. 3. Ground Lead (Black) Connect the lead to a good chassis ground on the car. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. 4. Door wire This wire connects the door sensor of car. Then the dome light can be switched by opening or closing door. 5.
ページ13に含まれる内容の要旨
To install the player 1. Make sure that what kind of power system your car is. Please slide to “-” at the left position if your Vehicle’s power supply system is negative; Please slide to “+” at the right position if your vehicle’s power supply system is positive. Notes: 1.Please slide it to a side fully. 2. Do not slide this switch after Place it at a position. Otherwise, it’ll be damaged. 2. To prevent short circuits, remove the key from the ignition and disconnect he termi
ページ14に含まれる内容の要旨
9. Attach the DVD player to the metal mounting plate using the CM 4x8 screws. Four CM4*8 screws 10. Reconnect the terminal of the battery. Notes: Do remember to connect the red wire to the ACC of the ignition switch. Or the battery charge might be drained off prematurely. If the fuse is opened, first make sure that the cables have not caused a short circuit, and then replace the old fuse with a new one of the same ratings. Do not have unconnected cables or terminals touch the
ページ15に含まれる内容の要旨
Using your DVD player Adjusting the DVD player To open the DVD player 1. Press Open Button to unlock the LCD panel. OPEN BUTTON 2. Swing the DVD player downward to the desired angle. Caution The LCD display opens to a maximum angle of 150° degrees. Do not attempt to open it further. 150° To close the DVD player λ Swing the LCD panel upward until you hear the lock click. close Make sure that cords and other items do not get caught in the panel CAUTIO
ページ16に含まれる内容の要旨
Using remote control 1. Pull out the battery holder. Follow the arrow 1 slide it to the right toward the battery while at the same time pull the battery holder away from the remote control. 2. Place the battery. Place the new lithium battery with the (+) side up. (The type of battery: Crd2025) 3. Push the holder back. Using the finger to push in the holder back until the locking sound is heard. 4. Aim the IR Remote Control directly at the DVD player, t
ページ17に含まれる内容の要旨
Replacing the battery If the remote control does not function, or if the operating range becomes reduced, replace the old battery with new one. Note Dispose used battery properly. Do not misuse battery by shorting the positive + and - negative terminal or put into fire which may cause the battery to explode. Battery and battery holder can be a choking hazard. Keep the remote control away from young children. Basic operation Turning on the player Press the [ ] bu
ページ18に含まれる内容の要旨
Turning off the player Press the button again, the player will be turned off. 1. If there is a disc media in the player, it will continue playback from last position the next time you turn the player on. 2. DVD Disc cannot be ejected if player is switched off. Playing a disc 1. If the input source isn’t already set to DVD-IN, press SRC button to change the input source to DVD-IN 2. Insert a disc to DVD into the disc slot on the right of the player. After several seconds, the scre
ページ19に含まれる内容の要旨
Changing the audio language during Playback (Multi Audio) 1. Press AUDIO button to change audio track during DVD playback. The current audio language number, the total number of available audio channels (languages) and current language are displayed. 2. If there are multiple languages are available, press AUDIO button again to cycle through the available languages. The audio display disappears automatically if AUDIO button is not pressed again within 3 seconds. Some DV
ページ20に含まれる内容の要旨
To repeat a custom segment: 1. During playback, press A-B to set the starting point “A”. 2. Press A-B again to set the ending point “B”. The player plays the segment between point A and point B repeatedly. 3. To cancel the repeat playback and resume normal playback, press A-B again. Changing Viewing Angle during Playback (Multi-Angle) To change viewing angle: 1. Press ANGLE button to cycle through available viewing Angles during DVD playback. The current angle number and the total num
