ページ1に含まれる内容の要旨
TABLE OF CONTENTS
Video Deck
VT-MX211A
Owner's Manual
Your Complete Guide
to Videocassette Viewing
and Recording
Using these quality features:
Bilingual on-screen menu display selectable in English or Spanish
Infrared remote control
Real time tape counter
181 channel capability PLL frequency synthesizer tuner with direct station call
Auto power on and off system
Auto counter reset
Auto rewind when the end of a tape is reached
Direct Button Operation
2 Step P
ページ2に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS............................................................................................................................ 2 IMPORTANT SAFEGUARDS .................................................................................................................. 5 PRECAUTIONS ......................................................................................................................................... 8 LOCATION ................
ページ3に含まれる内容の要旨
TABLE OF CONTENTS COUNTER MEMORY........................................................................................................................ 36 TO EXIT THE COUNTER MEMORY .............................................................................................. 36 RECORDING............................................................................................................................................ 37 VIEWING AND RECORDING THE SAME PROGRAM........................
ページ4に含まれる内容の要旨
TABLE OF CONTENTS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The caution marking is located on the rear of the cabinet. 4
ページ5に含まれる内容の要旨
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug this video product from the wall ou
ページ6に含まれる内容の要旨
IMPORTANT SAFEGUARDS must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources-This video product should be operated only from the type of power source indicated on the marking Label. If you are no
ページ7に含まれる内容の要旨
IMPORTANT SAFEGUARDS 18. Servicing-Do not attempt to service this VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the VCR. c. If the
ページ8に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS LOCATION For safe operation and satisfactory performance of your VCR, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the VCR. Do not place the unit on a carpet because this will block th
ページ9に含まれる内容の要旨
PRECAUTIONS WARNING Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the VCR at least for 2 hours until its inside is dry. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could los
ページ10に含まれる内容の要旨
FEATURES FEATURES • Bilingual on-screen menu display selectable in English or Spanish • Infrared remote control • Real time tape counter- This shows the elapsed recording or playback time in hours, minutes, and seconds. The "-" indication will appear when the tape is rewound further than the tape counter position "0:00:00". • 181 channel capability PLL frequency synthesizer tuner with direct station call- (A converter may be necessary to view scrambled cable channels.) • Auto
ページ11に含まれる内容の要旨
VIDEO CASSETTE VIDEO CASSETTE This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture, which can condense on the tape if it is moved from a cold place to a warm place. Before using a tape with these conditions, to avoid damage to the tape and your VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. •
ページ12に含まれる内容の要旨
VIDEO CASSETTE ERASE PREVENTION You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette. If you decide to record on the tape again, cover the hole with plastic tape. 12
ページ13に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS OPERATING CONTROLS AND FUNCTIONS FRONT VIEW illustration REMOTE CONTROL VIEW illustration 1. Cassette Compartment 2. REW button- Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode. (Rewind Search) 3. PLAY button- Press to begin playback. 4. F.FWD button- Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward Search) 5. PAUSE button- Press to temporarily stop the t
ページ14に含まれる内容の要旨
OPERATING CONTROLS AND FUNCTIONS 16. SELECT button- When setting program (for example: setting clock or timer program), press to determine your selection and proceed to a next step you want to input. Press to determine setting modes from on screen menu. Status function- Press to display the counter on the current channel number and current time on the TV screen. 17. COUNTER MEMORY button- Press to set counter memory on and off. 18. ADD/DELETE button- Press to add or delete channel numbers
ページ15に含まれる内容の要旨
PREPARATION FOR USE PREPARATION FOR USE CABLE CONNECTIONS For some of the most common types of connections, see the following drawings. Use only one connection. For any further complex connections, please contact your local dealer or other qualified persons. (You may need additional accessories which are not supplied). 1 Disconnect the antenna or cable from your TV. 2 Connect the antenna or cable to the ANT.IN jack of your VCR. 3 Connect one end of the coaxial cable (supplied)
ページ16に含まれる内容の要旨
PREPARATION FOR USE SETTING A VIDEO CHANNEL If your TV does not have A/V terminals; When the VCR is in the Playback mode or when the VCR/TV button on the remote control is in the VCR position, your TV will receive the signals from the VCR on either channel 3 or 4. To use the VCR with your TV, set the selector switch to CH3 or CH4, whichever is not used or least used for normal broadcasts in your area. Then set your TV to that same channel. A/V TERMINALS If your TV has A/V input jac
ページ17に含まれる内容の要旨
PREPARATION FOR USE CONNECTING TO INPUT JACKS When you copy a video tape, or watch a program recorded on an another source, use audio/video input jacks. INPUT SELECT To use the external input jacks, select the AUX position. Press the CHANNEL or button or enter "00" with number button on the remote control so that "AUX" appears on the screen. Note: "AUX" is found before the lowest memorized channel. (Example: CH2) INSTALLING THE BATTERIES 1) Open the battery compartment cover by p
ページ18に含まれる内容の要旨
PREPARATION FOR USE Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the poing of cable entry as practical. 18
ページ19に含まれる内容の要旨
PRESET FOR USE PRESET FOR USE Channel memory programming is NOT needed when connected to a cable box. You can program the tuner to scan only the channels you receive in your area. See page 29 for channel designations. NOTE: You must use the remote control for this procedure. AUTOMATIC CHANNEL PRESET (Without a Cable Box) NOTES: • Follow the steps below once. Repeat it only if there is a power failure or the VCR is unplugged for more than 30 seconds. (In these cases, the programmed
ページ20に含まれる内容の要旨
PRESET FOR USE 4 Select the VCR mode Press VCR/TV button so that "VCR" appears on the display 5 Select "ENGLISH" or "ESPANOL" Select "ENGLISH" or "ESPANOL=Spanish" using CH/SET or button. Then, press SELECT or MENU button. 6 Begin channel preset Press SELECT button once. The tuner scans and memorizes all the active channels in your area. (TV mode: from CH2/ CATV mode: from CH1) • The VCR distinguishes between standard TV channels and cable channels. 7 After scanning The tune
