ページ1に含まれる内容の要旨
Operating Guide
Compact Programmable
Room Air Conditioner with remote control
CP14
CP18
CP24
Please register
your air conditioner
Whenever you call to request service
on your appliance, you will need to
provide your complete model number
and serial number. You can fi nd this
information on the model and serial
number label.
Please record model and serial
number information below:
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
66121417 (1-07)
ページ2に含まれる内容の要旨
Table of Contents Air Conditioner Safety ......................................................................................................................................................2 Installation Requirements ...............................................................................................................................................3 Tools and Parts ........................................................................................................................
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fi re, electrical shock or injury when using your air conditioner, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Do not use an extension cord. ■ Do not remove plug ground prong. ■ Unplug air conditioner before servicing. ■ Do not use a plug adapter. ■ Use two or more people to move and install air conditioner. SAVE THESE INSTRUCTIONS Installation Requirements Location Requirements Tools and Parts Gathe
ページ4に含まれる内容の要旨
Window installation Electrical Requirements Window opening measurements: 27"min. to 42" max. (76.2 cm to 101.6 cm) opening width (A). WARNING 20" min. (50.8 cm) opening height (B). Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove powercord ground prong. A Do not use a plug adapter. B Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. A.27"min.(76.2cm) B . 20" min. (50.8 cm) Ground wire must be connected to
ページ5に含まれる内容の要旨
RESET RESET TEST TEST Recommended grounding method WARNING This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical
ページ6に含まれる内容の要旨
Installation Instructions Unpacking 5. Remove the window lock bracket and screw from the air 6. Remove front panel screw from right side of fi lter conditioner and set aside. area. WARNING Excessive Weight Hazard Use two or more people to move and install air conditioner. Failure to do so can result in back or other injury. Remove packaging materials Remove and dispose of or recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a
ページ7に含まれる内容の要旨
Window Installation (on some models) NOTES: Bottom view ■ Handle air conditioner carefully and gently. ■ Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. ■ The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded A 3prong power outlet. ■ Do not block the louvers on the front panel. B ■ Do not block the louvers on the outside of the air conditioner. A. Curtain housing B. Curtain bottom c
ページ8に含まれる内容の要旨
Install Cabinet into Window Attach Side Curtains to Window Frame ■ Handle air conditioner carefully and gently. 1. Pull left-hand curtain out until it fits into window channel. Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the ■ Be sure your air conditioner cabinet does not fall out of the curtain housing and into the lower window sash. opening during installation or removal. ■ The place where the power cord exits the air conditioner Front View should be no more than 4
ページ9に含まれる内容の要旨
2. Using #10 x ⁷⁄₈" pan-head Phillips screws, attach bracket to cabinet. Repeat for other bracket. Complete Installation 3. Loosen locking nut and turn the adjustment bolt (C) for each 1. Insert seal behind the top of the lower window sash and bracket until the bolt touches the wall (B). against the glass of the upper window (B). 4. Tighten the locking nut on adjustment bolt to lock in position. 2. Place one window-lock bracket on top of lower window and against upper window sash on each sid
ページ10に含まれる内容の要旨
■ Use 2" x 4" or thicker lumber for wood frame. 2. Insert cabinet into the framed wall opening. The top of the cabinet should extend ³⁄₄" (19.1 mm) into the room. If there is trim, the cabinet should extend ³⁄₄" (19.1 mm) past the trim. A B A B C A. Outside width B. Outside height C. Depth 4. Apply wood preservative to the outside exposed surface. 5. Insert the frame in the wall opening. Square and level frame. A. ³⁄₄ " (19.1 mm) extending into room B. Trim 6. Attach frame securely to the wall
ページ11に含まれる内容の要旨
3 5.5. UsUsing 1 - #10 x ing 2 - #10 x ³⁄₈" r /8 o" round-head scre und-head screws, att w, attach front of panel ach bottom front of panel to chassis. to chassis. WARNING Electrical Shock Hazard Connect green ground wire to ground screw. Failure to do so can result in death or electrical shock. 3. Connect green ground wire to cabinet base with ground screw. Position ground wire pointing straight up. Put excess ground 6. Reinstall fi lter and replace front grille. wire between coil and air c
ページ12に含まれる内容の要旨
Starting Your Air Conditioner—Digital Control Temperature Press, or press and hold, the plus button to raise the Money Auto Swing Timer Saver® temperature 1º until it reaches 86ºF (30ºC). 0 F 0 F Temp/Hour Temp/Hour Hr. Hr. POWER High Cool Med Mode Fan Speed Low Fan Only Press, or press and hold, the minus button to lower the temperature 1º until it reaches 64ºF (18ºC). 1. Press POWER to turn on air conditioner. Timer Delay To set the Timer for a 1- to 24-hour delay until the air conditioner tur
ページ13に含まれる内容の要旨
To raise the temperature: To operate air conditioner with remote control Press the plus button to raise the temperature. Each time you press or hold the plus button, the temperature will go up 1º until it NOTE: Remote control may vary in appearance. reaches 86°F (30°C). To lower the temperature: Press the minus button to lower the temperature. Each time you press or hold the minus button, the temperature will go down 1º until it reaches 64°F (18°C). To set Timer for a 1- to 24-hour delay before
ページ14に含まれる内容の要旨
Air Conditioner Care Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care Cleaning the Front Panel for your air conditioner properly. Call your local authorized dealer 1. Turn off air conditioner. for an annual checkup. Remember… the cost of this service call 2. Remove the air filter and clean it separately. See “Cleaning is your responsibility. the Air Filter.” 3. Wipe the front panel with a soft, damp cloth. Cleaning th
ページ15に含まれる内容の要旨
■ There is excessive heat or moisture (open container Air conditioner power supply cord trips (Reset button cooking, showers, etc.) in the room. Use a fan to exhaust pops out) heat or moisture from the room. Try not to use heat- producing appliances during the hottest part of the day. ■ Disturbances in your electrical current can trip (Reset ■ The louvers are blocked. Install the air conditioner in a button will pop out) the power supply cord. Press and location where the louvers are free f
ページ16に含まれる内容の要旨
Friedrich Air Conditioning Company P.O. Box 1540 San Antonio, TX 78295 210.357.4400 www.friedrich.com ROOM AIR CONDITIONERS LIMITED WARRANTY FIRST YEAR ANY PART: If any part supplied by FRIEDRICH fails because of a defect in workmanship or material within twelve months from date of original purchase, FRIEDRICH will repair the product at no charge, provided room air conditioner is reasonably accessible for service. Any additional labor cost for removing inaccessible units and/or charges fo
