ページ1に含まれる内容の要旨
Hard Disk Drive (HDD)
Installation Instructions
59393401
ページ2に含まれる内容の要旨
© 2007 by Oki Data Americas, Inc. All rights reserved. Document P/N 59383401 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Ment
ページ3に含まれる内容の要旨
Installation 1. Turn off the printer and detach the power cord from the back of the printer. 2. Detach the interface cable. 3
ページ4に含まれる内容の要旨
3. Open the top cover. 4
ページ5に含まれる内容の要旨
Warning! If the printer has been powered on recently, the fuser will be hot. This area is clearly labeled. 4. Press the release and open the front cover. 5
ページ6に含まれる内容の要旨
5. Loosen the thumbscrew holding the printer side panel in place. 6
ページ7に含まれる内容の要旨
6. Lift up on the ends of the side panel, then remove it from the printer. 7
ページ8に含まれる内容の要旨
7. Slide the access door in the metal plate and open it. 8. Remove the HDD from its shipping package. Caution! Observe antistatic precautions when installing the hard disk drive. 8
ページ9に含まれる内容の要旨
9. Plug the connecting cable (1) firmly into the connector (2) on the printer, then tighten the two thumbscrews (3). 9
ページ10に含まれる内容の要旨
10. Close the access cover and slide it to secure it in the metal plate. 11. Replace the side panel on the printer. 10
ページ11に含まれる内容の要旨
12. Use the thumbscrew to secure the panel. 13. Close the front cover. 11
ページ12に含まれる内容の要旨
14. Close the top cover. 15. Attach the interface cable. 16. Plug the power cord into the back and turn on the printer. 12
ページ13に含まれる内容の要旨
Verify the Installation Print the MenuMap 1. Press + one or more times until INFORMATION MENU appears on the display. 2. Press ENTER twice. The MenuMap prints. 3. Look at the top of the printout: HDD: installed should appear. If you see HDD: uninstalled, repeat the installation stepschecking to be sure that the Hard Disk Drive is firmly seated in the printer connectoruntil it does. 13
ページ14に含まれる内容の要旨
Activate the HDD in the Driver ® Windows Postscript Emulation Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer. The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Faxes. The Printers and Faxes dialog box opens. Windows 2000 a. Click Start → Settings → Printers. The Printers dialog box opens. 2. Right click the appropriate printer icon. Click Properties. 3. Click the Device Settings tab. 4. Scroll down to Instal
ページ15に含まれる内容の要旨
5. Select Installed. 6. Click OK and close the dialog box. PCL Driver 1. First Windows Vista a. Click Start → Settings → [Hardware and Sound] Printer. The Printer dialog box opens. Windows XP, Server 2003 a. Click Start → Settings → Printers and Faxes. The Printers and Faxes dialog box opens. Windows 2000 a. Click Start → Settings → Printers. The Printers dialog box opens. 2. Right click the PCL printer icon. Click Properties. 3. Click the Device Option(s) tab. 4. Click Printer Hard Disk. 5.
ページ16に含まれる内容の要旨
3. Click Printer → Setup. 4. Click Configure. 5. Select Hard Disk in the Change drop-down menu. 6. Change the setting of the next drop-down menu to Installed. 7. Click OK twice and close Chooser. Mac OS 10.2, 10.3, 10.4 1. First OS 10.2 a. Activate Print Center: Local Hard Drive → Applications → Utilities → Print Center. OS 10.3, 10.4 a. Activate the Printer Setup Utility: Local Hard Drive → Applications → Utilities → Printer Setup Utility. 2. Highlight the printer name. Select from the
