ページ1に含まれる内容の要旨
E
INSTRUCTION MANUAL
9222-2799-11 PR-A212/ME0302
ページ2に含まれる内容の要旨
BEFORE YOU BEGIN Thank you for purchasing this Minolta digital camera. Please take the time to read through this instruction manual so you can enjoy all the features of your new camera. Check the packing list before using this product. If any items are missing, immediately contact your camera dealer. Minolta DiMAGE S414 digital camera AA alkaline batteries (set of four) Neck strap NS-DG304 Lens cap LF-236 CompactFlash card AV cable AVC-100 USB cable USB-600 DiMAGE Viewer CD-ROM DiMAGE Viewer ins
ページ3に含まれる内容の要旨
FOR PROPER AND SAFE USE Read and understand all warnings and cautions before using this product. WARNING Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury. Do not ignore the following warnings. • Only use the batteries specified in this instruction manual. • Do not install the batteries with the polarity (+/–) reversed. • Do not use batteries which show wear or damage. • Do not expose batteries to fire, hi
ページ4に含まれる内容の要旨
• Store this product out of reach of children. Be careful when around children not to harm them with the product or parts. • Do not fire the flash directly into the eyes. It may damage eyesight. • Do not fire the flash at vehicle operators. It may cause a distraction or temporary blindness which may lead to an accident. • Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident. • Do not look directly at the sun or strong light sources through the viewf
ページ5に含まれる内容の要旨
• The camera temperature rises with extended periods of use. Care should be taken to avoid burns. • Burns may result if the memory card or batteries are removed immediately after extended periods of use. Turn the camera off and wait for it to cool. • Do not fire the flash while it is in contact with people or objects. The flash unit discharges a large amount of energy which may cause burns. • Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and the liquid from the mo
ページ6に含まれる内容の要旨
TABLE OF CONTENTS The basic operation of this camera is covered between pages 15 and 42. This section of the manual covers the camera parts, preparation of the camera for use, and the basic camera operation for recording, viewing, and deleting images. The basic and advanced auto-recording mode sections cover all the basic functions of the camera in this mode and in the multi-function recording mode. Take time to read these sections before moving on to the multi-function recording mode section. T
ページ7に含まれる内容の要旨
Basic recording operation........................................................................................................25 Focus lock................................................................................................................................26 Focus range.............................................................................................................................26 Focus signals...........................................................................
ページ8に含まれる内容の要旨
A short guide to photography...............................................................................................................66 Movie recording....................................................................................................................................68 Notes on movie recording .......................................................................................................69 Recording movies with the IR Remote Control RC-3 (sold separately)...........
ページ9に含まれる内容の要旨
Data-transfer mode...............................................................................................................................92 System requirements...............................................................................................................92 Connecting the camera to a computer....................................................................................93 Connecting to Windows 98 and 98 Second Edition ..................................................
ページ10に含まれる内容の要旨
CAMERA BODY * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 107). Mode dial (main switch) Shutter-release button Digital-subject-program button (p. 28) Data panel (p. 13) Viewfinder window* Microphone Speaker Flash (p. 30) Strap eyelet (p. 15) Remote-control receiver Self-timer/ Lens* Remote-control lamp (p. 33) Battery-chamber door (p. 16) Battery-chamber lock (p.
ページ11に含まれる内容の要旨
Flash mode/Magnification button (p. 30, 41) Drive-mode button (p. 32) Exposure-compensation button (p. 50) Viewfinder* (p. 12) LCD monitor* (p. 14) Controller Menu button QV/ Delete button (p. 38) Display button (p. 37, 40) Access lamp DC terminal cover (p. 18) Card-slot door release Card-slot door (p. 18) The USB port and AV-out terminal are located behind the card-slot door. Tripod socket 11
ページ12に含まれる内容の要旨
VIEWFINDER Focus lamp (green) Flash lamp (orange) Focus frame Because the optical viewfinder and the lens are slightly separated, the image seen through one is not exactly the same as the other; this is called parallax. Parallax can cause errors in framing at close distances and is more pronounced at longer focal lengths. When the subject is closer than 1m (3ft) at the wide-angle lens position or 3m (10ft) at the telephoto lens position, use the LCD monitor to compose the image; because the le
ページ13に含まれる内容の要旨
DATA PANEL Digital-subject-program indicators (p. 28) White-balance indicator (p. 60) Manual-focus indicator (p. 59) Camera-sensitivity indicator (p. 62) Spot-metering indicator (p. 63) Flash-mode indicators (p. 30) Image-size display (p. 44) Image-quality display (p. 44) Drive-mode indicators (p. 32) Microphone indicator (p. 46) Battery-condition indicator (p. 17) Exposure-compensation indicator (p. 50) Exposure-mode indicators (p. 56) The frame counter cannot exceed 999. Digital-subject-progra
ページ14に含まれる内容の要旨
LCD MONITOR DISPLAY a. Voice memo indicator (p. 46) o. Manual-focus indicator (p. 59) b. Mode indicator (p. 12) p. Focus signal (p. 27) c. Flash-mode indicator (p. 30) q. Frame counter (p. 13) d. Sharpness display (p. 65) r. Drive-mode indicator (p. 32) e. Contrast-compensation display (p. 65) s. Macro indicator (p. 28) f. Filter display (p. 65) t. Battery-condition indicator (p. 17) g. Exposure-compensation display (p. 50) u. Image-quality indicator (p. 44) h. White-balance indicator (p. 60) v.
ページ15に含まれる内容の要旨
GETTING UP AND RUNNING ATTACHING THE NECK STRAP AND LENS CAP Attach the small strap to the lens cap by passing one of the small loops through the eyelet on the cap (1) and then passing the other loop through the first loop (2) and tightening. 2 1 Attach the camera strap to the strap eyelets as shown. Make sure the neck strap passes through the loop of the lens-cap strap. Always keep the camera strap around your neck in the event that 3 you drop the camera. 4 Using your thumb and index finger, pi
ページ16に含まれる内容の要旨
CHANGING BATTERIES This digital camera uses four AA-size alkaline or Ni-MH batteries. Ni-MH batteries are recommended because of longer life. When using Ni-MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment. Please consult your vendor about an appropriate charger. When replacing batteries, the mode dial should be in the off position. If the camera is not turned off when replacing exhausted batteries, the low-battery warning may not reset. 3 Open th
ページ17に含まれる内容の要旨
BATTERY CONDITION INDICATOR This camera is equipped with an automatic battery-condition indicator. When the camera is on, the battery-condition indicator appears on the data panel and monitor. The monitor icon will change from white to red when battery power is low. If the data panel and monitor are blank, the batteries may be dead or installed incorrectly. Full-battery Icon - the batteries are fully charged. This icon is displayed for five seconds on the monitor when the camera is turned on. Th
ページ18に含まれる内容の要旨
EXTERNAL POWER SUPPLIES (SOLD SEPARATELY) The AC Adapter allows the camera to be powered from an electrical household outlet. The AC Adapter is recommended when the camera is interfaced with a computer or during periods of heavy use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan; AC-2L is for use in all other areas. The External High-power Battery Pack Kit EBP-100 is a portable source of power for the camera. The kit contains a high-power lithium-ion battery, holder, and
ページ19に含まれる内容の要旨
Always turn off the camera and confirm the access lamp is not lit before inserting or removing a CompactFlash card, otherwise the card may be damaged, and data lost. 1 2 3 4 Slide the card-slot door release down to open the card-slot door (1). To eject a CompactFlash card, press the card-eject lever (2). The card can now be pulled out. Take care when removing the card as it becomes hot with use. Insert the memory card into the card slot until the card-eject lever pops out (3). Insert the card so
ページ20に含まれる内容の要旨
SETTING THE DATE AND TIME After initially inserting a memory card and batteries, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording. Depending on the region, the menu language may also have to be set. To change the language, see the camera notes on the following page. Turn the mode dial on the top of the camera to the setup position. The camera will turn on and the setup menu will be displayed. Navigating the menu is
