ページ1に含まれる内容の要旨
LYT2019-001B-M
INSTRUCTIONS
EN SP
MANUAL DE INSTRUCCIONES
MEMORY CAMERA
Dear Customer
Thank you for purchasing
VIDEOCÁMARA CON MEMORIA
this memory camera. Before
use, please read the safety
U
GZ-MS130
information and precautions
contained in pages 2 and 3 to
ensure safe use of this product.
For Future Reference:
Enter the Model No. (located
on the bottom of the memory
camera) and Serial No. (located
on the battery pack mount of the
camcorder) below.
Model No.
Serial No.
Apreciado clie
ページ2に含まれる内容の要旨
Safety Precautions When the equipment is installed in a cabinet or on CAUTION a shelf, make sure that it has sufficient space on RISK OF ELECTRIC SHOCK DO NOT OPEN all sides to allow for ventilation (10 cm (3-15/16 ") or more on both sides, on top and at the rear). CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, Do not block the ventilation holes. DO NOT REMOVE COVER (OR BACK). (If the ventilation holes are blocked by a NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Remember that this camcorder is intended for private consumer use only. 1. Read these instructions. Any commercial use without proper permission 2. Keep these instructions. is prohibited. (Even if you record an event such 3. Heed all warnings. as a show, performance or exhibition for personal 4. Follow all instructions. enjoyment, it is strongly recommended that you 5. Do not use this apparatus near water. obtain permission beforehand.) 6. Clean only with dry c
ページ4に含まれる内容の要旨
Easy Start Guide Charge the battery before recording Turn off the camcorder and attach the battery pack. Power/charge lamp Access lamp Blinks: Charging Blinks: Accessing files goes out: Charging finished Do not remove the AC adapter, the battery pack or the SD card when Open the cover the lamp is blinking. Battery Pack The battery pack is not charged at the time of purchase. AC Adapter To AC Outlet (110V to 240V) CAUTION Be sure to use JVC battery packs. If you use any other battery packs be
ページ5に含まれる内容の要旨
Date/Time Setting Select [CLOCK SETTING] Open the LCD monitor to CLOCK ADJUST CLOCK SETTING turn on the camcorder AREA SETTING SET FOR DAYLIGHT SAVING TIME Power Button SET THE CITY, DATE AND TIME SET QUIT Select the city closest to the area where you use the camcorder AREA SETTING LCD monitor NOV.1.2009 04:55PM Select [YES] within SET QUIT 10 seconds Slide your finger up and down on the sensor. Then touch OK. Select [ON] if daylight saving time is effective. SET DATE/TIME! SET FOR DAYLI
ページ6に含まれる内容の要旨
Video recording CAUTION Before recording an important scene, it is recommended to conduct a trial recording. Slide the mode switch to select (video) mode S elect recording mode PLAY/REC The mode changes The auto recording when you press the indicator appears. button. [] 4 h 59 m 0 : 04 : 01 M Start recording Remaining space on built-in memory or SD card Record- Video Press the START/ standby Quality STOP button to start recording, and press [ ] 4 h 59 m it again to stop. 0 : 04 : 01 R
ページ7に含まれる内容の要旨
Playing back Select playback mode PLAY/REC The mode changes when you press the button. Select the desired fi le Index screen VIDEO PLAYBACK 1/2 NOV.01.2009 04:55PM DIGEST Select (Touch OK) Playback screen To perform operations such as forward search or reverse search ( pg. 22) To view files on TV ( pg. 25) It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data. CAUTION Don’t forget to make co
ページ8に含まれる内容の要旨
Contents USING WITH TV GETTING STARTED Viewing Files on TV .............................. 25 Index ...................................................... 10 Connection with TV......................................25 Accessories .......................................... 12 Playback Operation .....................................25 Attaching the core filter ................................12 Preparing the Remote Control .....................12 Indications on LCD Monitor ................. 13 EDIT
ページ9に含まれる内容の要旨
GETTING RECORDING/ USING WITH FURTHER STARTED PLAYBACK TV EDITING COPYING INFORMATION How to use the Touch Sensor After the menu is displayed on the LCD monitor: Read This First! Make a backup of important recorded data VIDEO It is recommended to copy your important MANUAL SETTING recorded data to a DVD or other recording media LIGHT for storage. JVC will not be responsible for any REGISTER EVENT lost data. VIDEO QUALITY USE DETAIL SETTINGS BASED QUIT SET Make a trial recording Before th
ページ10に含まれる内容の要旨
GETTING ST ARTED Index NOTE The LCD monitor can rotate 270°. � Be careful not to cover , , and � during shooting. EN10 GZ-MS130BU_US_IB_ENB.indb 10 GZ-MS130BU_US_IB_ENB.indb 10 4 4/28/2008 11:44:07 AM /28/2008 11:44:07 AM DC
ページ11に含まれる内容の要旨
GETTING STARTED Camcorder Remote Control Touch Sensor Infrared Beam Transmitting Window OK Button ZOOM (T/W) Buttons (Zoom in/out) MENU Button Up Button Power (1) Button Skip Backward Button SD Card Slot ( pg. 18) EXPORT Button Left Button AV Connector Back Button UPLOAD Button ( pg. 36) PLAYLIST Button PLAY/REC Button ( pg. 19, 20, 22, 23) START/STOP Button Mode Switch [ , ] DIRECT DVD Button ( pg. 28) S. SHOT (SNAPSHOT) Button INFO Button ( pg. 21) INFO Button Sk
ページ12に含まれる内容の要旨
Accessories or AC Adapter Battery Pack Audio/Video Remote Control AP-V20U/AP-V14U* BN-VF808U Cable RM-V751U USB Cable CD-ROM Core Filter (x2) Lithium Battery CR2025 Pre-installed in the remote control unit. NOTE Make sure to use the provided cables for connections. Do not use any other cables. * AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM. Attaching the Core Filter The core filter reduces interference caused when connecting to other devices. USB Cable: Wind once Release
ページ13に含まれる内容の要旨
GETTING STARTED Indications on LCD Monitor During both Video and Still Image During Video Recording Only Recording [4h59m] LIB. REC 0:04:01 PHOTO 1/4000 0 WT SD LCD NOV. 1. 2009 4:55 PM Mode Indicator EXPORT Mode Indicator ( pg. 35) Selected Operation Mode Indicator Counter ( pg. 24) Upload Mode Indicator ( pg. 36) : Auto Mode Video Quality: : Manual Mode (ULTRA FINE), (FINE), Effect Mode Indicator (NORMAL), (ECONOMY) Tele Macro Mode Indicator Remaining Time L
ページ14に含まれる内容の要旨
Indications on LCD Monitor (Continued) During Video Playback During Still Image Playback 1: 55 : 01 101- 0098 +4 SD SD 8 NOV. 1. 2009 4:55 PM NOV. 1. 2009 4:55 PM Mode Indicator Mode Indicator older/File Number Playlist Playback Indicator (Appears when Slide Show Playback Indicator playing back a playlist.) Battery Indicator Video Quality: Date/Time ( pg. 16) (ULTRA FINE), (FINE), (NORMAL), (ECONOMY) Counter Playback Mode :Playback :Pause :Forward Search :Reverse S
ページ15に含まれる内容の要旨
GETTING STARTED Necessary Settings before Use To check the remaining battery power Charging the Battery Pack See page 21. Required charging/recording time (approx.) 1 Close the LCD monitor to turn off the *When the LED light is off and the monitor camcorder. backlight is set to [STANDARD] mode. Battery pack Charging time Recording time 2 Attach the battery pack, then BN-VF808U 1 hr. 50 min. 2 hr. 45 min.* connect the AC adapter. (Provided) � With the “v v” (arrow) on the battery pa
ページ16に含まれる内容の要旨
Other Settings SET FOR DAYLIGHT SAVING TIME Date/Time Setting DAYLIGHT SAVING TIME (DST) OFF NOV.1.2009 04:55PM 1 Open the LCD monitor to turn on the SET DAYLIGHT SAVING TIME camcorder. SET QUIT 2 Touch MENU. 8 Set the date and time. 3 Select [DISPLAY SETTINGS]. Select the item by using the touch sensor and select [ ] to set. VIDEO WIND CUT CLOCK SETTING AUTO SWITCH REC MEDIA DISPLAY SETTINGS > > DATE TIME > BASIC SETTINGS NOV 1 2009 4 55 PM CONFIGURE ON-SCREEN DISPLAY GMT+ 9:00 SET QU
ページ17に含まれる内容の要旨
GETTING STARTED Langua ge Setting Tripod Mounting Align the camcorder stud hole with the tripod The language on the display can be changed. stud, and the mounting socket with the screw, 1 Open the LCD monitor to turn on the and then rotate the camcorder clockwise to camcorder. mount it to the tripod. 2 Touch MENU. Bottom of the Camcorder 3 Select [DISPLAY SETTINGS]. VIDEO WIND CUT AUTO SWITCH REC MEDIA DISPLAY SETTINGS > > > BASIC SETTINGS CONFIGURE ON-SCREEN DISPLAY SET QUIT 4 Select [LA
ページ18に含まれる内容の要旨
Other Settings (Continued) NOTE Insert and remove the SD card only while Using an SD Card � the power is turned off. Otherwise, data on If you want to record to an SD card, the the card may be corrupted. following operations need to be performed. Do not touch the terminal on the reverse � Operations are confirmed on the following side of the label. � SD cards: Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, Chang e the recording medium SanDisk, ATP SD card (256 MB
ページ19に含まれる内容の要旨
RECORDING/ PLAYBACK RECORDING/PLA YBACK Recording Files Video Recor ding Slide the mode switch to select Press the PLAY/REC button to (video) mode. select recording mode. PLAY/REC [4 h 59 m] 0:00:00 SNAPSHOT Press the START/STOP button to start recording. [4 h 59 m] 0:00:01 REC Approximate remaining time for recording appears. You can also start/stop recording by selecting [REC] on the LCD monitor. (On-screen recording control). To stop recording To change the picture quality Press the
ページ20に含まれる内容の要旨
Recording Files (Continued) Still Image Recording Press the PLAY/REC button to Slide the mode switch to select select recording mode. (still image) mode. PLAY/REC FINE [9999] Press and hold the SNAPSHOT button halfway. FINE The indicator becomes green when the captured image is focused. To view the last recorded image Select after shooting. Selecting during playback deletes Press the SNAPSHOT button fully that image. to take the photo/picture. To change the picture quality Chang